summaryrefslogtreecommitdiff
path: root/tex/context/base/thrd-tab.tex
diff options
context:
space:
mode:
Diffstat (limited to 'tex/context/base/thrd-tab.tex')
-rw-r--r--tex/context/base/thrd-tab.tex1960
1 files changed, 1960 insertions, 0 deletions
diff --git a/tex/context/base/thrd-tab.tex b/tex/context/base/thrd-tab.tex
new file mode 100644
index 000000000..1ddb11c55
--- /dev/null
+++ b/tex/context/base/thrd-tab.tex
@@ -0,0 +1,1960 @@
+% TABLE 1.0
+% Copyright Michael J. Wichura August 1988
+
+%% The following three lines were inserted by C.E.K. of Personal TeX on 9-6-89
+%% \input nine
+%% \input eight
+%% \font\csc=cmcsc10
+
+
+
+% The TABLE macros are divided into sections, roughly according to
+% function:
+
+% Section Name Function
+% a Allocation Allocates storage registers for parameters.
+% f Format Reads format section; builds preamble for \halign;
+% processes \ReFormat command.
+% g Get Value Converts "spec"'s (as in spec_{LT}) to
+% corresponding "values"'s (as in value_{LT}).
+% h Hacks Utility macros; error messages; miscellaneous commands.
+% k Keys Definition and scanning of format keys.
+% n Numeric Macros for TABLE's numeric format.
+% s Struts Macros for struts.
+% t Tables Sets up \halign for table; end-of-row processing;
+% alternate vertical rules; spanning; horizontal
+% lines; stretching and shrinking; repositioning
+% commands.
+
+% The name of each internal macro begins with the prefix "\!t", the
+% "!" having category code 11, followed by the letter of the section
+% in which the macro is defined. For example, a macro beginning "\!th"
+% is defined in Section h (Hacks). There a few exceptions:
+% the general purpose macros "\!ttemp", "\!ttempa", "\!ttempb", and
+% "\!tnext" are repeatedly defined on the spot as the need arises.
+
+% External macros (and active characters) are defined in the following
+% sections:
+% Macro Section
+% " t
+% \- t
+% \= t
+% \ActivateBarAndQuote h
+% \AugmentedTableStrut s
+% \BackSpace h
+% \BeginFormat f
+% \BeginTable t
+% \BeginTableParBox a
+% \Center t
+% \ColumnWidthFactor a
+% \ColumnWidthUnit a
+% \DQuote h
+% \EndFormat k (\EndFormat is actually a key)
+% \EndTable t
+% \EndTableParBox a
+% \Enlarge s
+% \enlarge s
+% \EveryTable a
+% \EveryTableParBox a
+% \Expand t
+% \InterColumnSpaceFactor a
+% \InterColumnSpaceUnit a
+% \JustCenter t
+% \JustLeft t
+% \JustRight t
+% \KernFactor a
+% \KernUnit a
+% \Left t
+% \LeftTabskip a
+% \LineThicknessFactor a
+% \LineThicknessUnit a
+% \LongLines t
+% \Lower h
+% \MakeStrut s
+% \NewFormatKey k
+% \NormalCWU a
+% \NormalICSU a
+% \NormalKU a
+% \NormalLTU a
+% \NormalSU a
+% \NormalTableUnits a
+% \OpenUp s
+% \PseudoVrule t
+% \Raise h
+% \ReadFormatKeys k
+% \ReFormat f
+% \Right t
+% \RightTabskip a
+% \SetTableToWidth t
+% \Smash h
+% \StandardTableStrut s
+% \StrutDepthFactor a
+% \StrutHeightFactor a
+% \StrutUnit a
+% \TaBlE h
+% \TracingFormats a
+% \TracingKeys a
+% \Use t
+% \use t
+% \VBar h
+% \Vspace h
+% \VspaceFactor a
+% \WidenTableBy t
+% \\ t
+% \_ t
+% \| t
+% | t
+% ~ t
+%
+\catcode `\!=11
+\catcode `\@=11
+
+% Don't try to read the TABLE macros until after you've read the
+% TABLE manual. The internal documentation of the macros is
+% sketchy; you need the manual to understand what's going on.
+% You should also review the material on \halign s in the TeXbook,
+% since TABLE uses an \halign to perform its alignments.
+
+% In studying the TABLE macros, you should start by skimming the
+% macros in the "miscellaneous hacks", "error messages", and "loops"
+% subsections of Section h, as well as the "\GetValue" macro in
+% Section g; these macros are called many times by the other macros.
+% To continue with a "bottom-up" approach, read next Sections k,
+% f, and t. (Top-downers should reverse the order.) The other
+% Sections can be looked at as the need arises.
+
+
+
+% *********************************************************************
+% SECTION A: ALLOCATION
+% *********************************************************************
+
+\let\!tacr=\\ % Save meaning of \\ (Needed if TABLE is used with LaTeX
+
+% *********************************************************************
+% TABLE PARAMETERS: Units
+% *********************************************************************
+
+\newdimen\LineThicknessUnit
+\newdimen\StrutUnit
+\newskip \InterColumnSpaceUnit
+\newdimen\ColumnWidthUnit
+\newdimen\KernUnit
+
+\let\!taLTU=\LineThicknessUnit % Used in preamble
+\let\!taCWU=\ColumnWidthUnit % Used in preamble
+\let\!taKU =\KernUnit % Used in preamble
+
+\newtoks\NormalTLTU
+\newtoks\NormalTSU
+\newtoks\NormalTICSU
+\newtoks\NormalTCWU
+\newtoks\NormalTKU
+
+% NOTE: The user should modify the following DEFAULTS to suit his/her
+% taste, and output device:
+%\def\PixelsPerInch{300}
+\NormalTLTU={1in \divide \LineThicknessUnit by 300 }
+\NormalTSU ={\normalbaselineskip
+ \divide \StrutUnit by 11 } % 11 = 8+3 = NormalT Height+Depth Factors
+\NormalTICSU={.5em plus 1fil minus .25em} % .5em = width of a digit
+\NormalTCWU ={.5em}
+\NormalTKU ={.5em}
+
+\def\NormalTableUnits{%
+ \LineThicknessUnit =\the\NormalTLTU
+ \StrutUnit =\the\NormalTSU
+ \InterColumnSpaceUnit=\the\NormalTICSU
+ \ColumnWidthUnit =\the\NormalTCWU
+ \KernUnit =\the\NormalTKU}
+
+\NormalTableUnits
+
+% The user should issue \NormalTableUnits when setting a table
+% in a different point size, since the Table...Units themselves
+% are static while the Normal...Units vary with the point size.
+
+
+% *********************************************************************
+% TABLE PARAMETERS: Factors
+% *********************************************************************
+
+\newcount\LineThicknessFactor
+\newcount\StrutHeightFactor
+\newcount\StrutDepthFactor
+\newcount\InterColumnSpaceFactor
+\newcount\ColumnWidthFactor
+\newcount\KernFactor
+\newcount\VspaceFactor
+
+% DEFAULTS:
+\LineThicknessFactor =2
+\StrutHeightFactor =8
+\StrutDepthFactor =3
+\InterColumnSpaceFactor =3
+\ColumnWidthFactor =10
+\KernFactor =1
+\VspaceFactor =2
+
+
+% *********************************************************************
+% DIAGNOSTIC PARAMETERS
+% *********************************************************************
+
+\newcount\TracingKeys % >=1 reports new keys, >=2 reports key usage
+\newcount\TracingFormats % >=1 reports templates for columns
+ % >=2 reports \halign preamble
+
+
+% *********************************************************************
+% PARBLOCK PARAMETERS
+% *********************************************************************
+
+\def\BeginTableParBox#1{%
+ \vtop\bgroup
+ \hsize=#1
+ \normalbaselines
+ \let~=\!ttTie
+ \let\-=\!ttDH
+ \the\EveryTableParBox}
+
+\def\EndTableParBox{%
+ \MakeStrut{0pt}{\StrutDepthFactor\StrutUnit}
+ \egroup} % finishes the \vtop begun by \BeginTableParbox
+
+\newtoks\EveryTableParBox
+\EveryTableParBox={%
+ \parindent=0pt
+ \raggedright
+ \rightskip=0pt plus 4em % Provide more stretch
+ \relax}
+
+
+% *********************************************************************
+% EVERY TABLE TOKENS
+% *********************************************************************
+
+\newtoks\EveryTable
+\newtoks\!taTableSpread
+
+
+% *********************************************************************
+% Extreme left- and right- tabskips
+% *********************************************************************
+
+\newskip\LeftTabskip
+\newskip\RightTabskip
+
+
+% *********************************************************************
+% INTERNAL VARIABLES
+% *********************************************************************
+
+\newcount\!taCountA
+\newcount\!taColumnNumber
+\newcount\!taRecursionLevel % (Initially 0)
+
+\newdimen\!taDimenA % used by \Enlarge
+\newdimen\!taDimenB % used by \Enlarge
+\newdimen\!taDimenC % used by numeric.tex
+\newdimen\!taMinimumColumnWidth
+
+\newtoks\!taToksA
+
+\newtoks\!taPreamble
+\newtoks\!taDataColumnTemplate
+\newtoks\!taRuleColumnTemplate
+\newtoks\!taOldRuleColumnTemplate
+\newtoks\!taLeftGlue
+\newtoks\!taRightGlue
+
+\newskip\!taLastRegularTabskip
+
+\newif\if!taDigit
+\newif\if!taBeginFormat
+\newif\if!taOnceOnlyTabskip
+
+
+
+% *********************************************************************
+% SECTION H: HACKS
+% *********************************************************************
+
+% ****************************************************************
+% TABLE LOGO
+% ****************************************************************
+\def\TaBlE{%
+ T\kern-.27em\lower.5ex\hbox{A}\kern-.18em B\kern-.1em
+ \lower.5ex\hbox{L}\kern-.075em E}
+
+
+% ****************************************************************
+% ACTIVE CHARACTERS
+% ****************************************************************
+
+% ACTIVATE BAR AND QUOTE: Makes | and " active if they aren't
+% already active (in which case the user will probably have given
+% them special meanings); definitions are provided which effectively
+% undoes the activeness outside a Table.
+
+{\catcode`\|=13 \catcode`\"=13
+ \gdef\ActivateBarAndQuote{%
+ \ifnum \catcode`\|=13
+ \else
+ \catcode`\|=13
+ \def|{%
+ \ifmmode
+ \vert
+ \else
+ \char`\|
+ \fi}%
+ \fi
+ \ifnum \catcode`\"=13
+ \else
+ \catcode`\"=13
+ \def"{\char`\"}%
+ \fi}}
+
+% ****************************************************************
+% Macros for | and " having category code 12.
+% ****************************************************************
+{\catcode `\|=12 \catcode `\"=12
+\gdef\VBar{|}
+\gdef\DQuote{"}}
+
+
+% ****************************************************************
+% MISCELANEOUS HACKS
+% ****************************************************************
+
+% MESSAGE <Message>: Writes out <Message> to terminal and log file.
+\def\!thMessage#1{\immediate\write16{#1}\ignorespaces}
+
+% X: Abbreviation for expandafter
+\let\!thx=\expandafter
+
+% GOBBLE: Eats next token
+\def\!thGobble#1{}
+
+% SPACE TOKEN
+\def\\{\let\!thSpaceToken= }\\
+
+% HEIGHT, DEPTH, AND WIDTH
+\def\!thHeight{height}
+\def\!thDepth{depth}
+\def\!thWidth{width}
+
+% TOKSEDEF <token register>=<replacement text>: Places <replacement
+% text>, fully expanded a la \edef, in the specified <token register>.
+\def\!thToksEdef#1=#2{%
+ \edef\!ttemp{#2}%
+ #1\!thx{\!ttemp}%
+ \ignorespaces}
+
+
+% ****************************************************************
+% ERROR MESSAGES
+% ****************************************************************
+
+% STORE ERROR MSG <Control Sequence> <Message>
+% Replacement text of <Control Sequence> is a macro with Message
+% as its name. E.g., after \StoreErrorMsg\Help{Type <CR>},
+% \Help expands to "\Type <CR>"
+\def\!thStoreErrorMsg#1#2{%
+ \toks0 =\!thx{\csname #2\endcsname}%
+ \edef#1{\the\toks0 }}
+
+% READ ERROR MSG <Control sequence>
+% Continuing the above example, \ReadErrorMsg\Help produces "Type <CR>"
+\def\!thReadErrorMsg#1{%
+ \!thx\!thx\!thx\!thGobble\!thx\string #1}
+
+% ERROR <Error Message> <Error Help>
+\def\!thError#1#2{%
+ \begingroup
+ \newlinechar=`\^^J%
+ \edef\!ttemp{#2}%
+ \errhelp=\!thx{\!ttemp}%
+ \!thMessage{%
+ ^^J\!thReadErrorMsg\!thErrorMsgA
+ ^^J\!thReadErrorMsg\!thErrorMsgB}%
+ \errmessage{#1}%
+ \endgroup}
+
+% TEXT FOR ERROR MESSAGE
+\!thStoreErrorMsg\!thErrorMsgA{%
+ TABLE error; see manual for explanation.}
+\!thStoreErrorMsg\!thErrorMsgB{%
+ Type \space H <return> \space for immediate help.}
+
+% GET REPLACEMENT <Prompt Message> <Replacement Value>
+% <Replacement Vale> must be a control sequence
+\def\!thGetReplacement#1#2{%
+ \begingroup
+ \!thMessage{#1}
+ \endlinechar=-1
+ \global\read16 to#2%
+ \endgroup}
+
+
+% ****************************************************************
+% LOOP MACRO
+% ****************************************************************
+
+% LOOP ... REPEAT macro from TUGboat Vol 8 #2: 1987
+% Syntax is like that of plain TeX's \loop ... \repeat macro
+\def\!thLoop#1\repeat{%
+ \def\!thIterate{%
+ #1%
+ \!thx \!thIterate
+ \fi}%
+ \!thIterate
+ \let\!thIterate\relax}
+
+
+% ***************************************************************
+% VERTICALLY-CENTERED SMASH
+% ***************************************************************
+
+% SMASH: Like TeX's \smash, only the argument
+% is centered vertically before its height and depth are smashed to 0pt.
+\def\Smash{%
+ \relax
+ \ifmmode
+ \expandafter\mathpalette
+ \expandafter\!thDoMathVCS
+ \else
+ \expandafter\!thDoVCS
+ \fi}
+
+% DO VCS
+\def\!thDoVCS#1{%
+ \setbox\z@\hbox{#1}%
+ \!thFinishVCS}
+
+% DO MATH VCS
+\def\!thDoMathVCS#1#2{%
+ \setbox\z@\hbox{$\m@th#1{#2}$}%
+ \!thFinishVCS}
+
+% FINISH VCS
+\def\!thFinishVCS{%
+ \vbox to\z@{\vss\box\z@\vss}}
+
+
+% ***************************************************************
+% RAISE AND LOWER
+% ***************************************************************
+
+% Like TeX's \raise and \lower, except: (1) The first argument
+% to these commands is a dimension expressed in TABLE's usual conventions;
+% the default is (StrutHeightFactor+StrutDepthFactor)*StrutUnit/2
+% (2) like \smash, these commands function in math mode as well
+% as horizontal mode; (3) again like \smash, the result is declared
+% to have height and depth 0pt
+
+% Examples \Raise2{Stuff}: "Stuff" is raised 2*StrutUnit
+% \Raise {Stuff}: "Stuff" is raised a half-line
+% $\Lower(10pt){\alpha}$: "$\alpha$" is lowered 10 points
+
+% RAISE
+\def\Raise{%
+ \def\!thSign{+}%
+ \!tgGetValue\!thSetDimen}
+
+% LOWER
+\def\Lower{%
+ \def\!thSign{-}%
+ \!tgGetValue\!thSetDimen}
+
+% SET DIMEN
+\def\!thSetDimen{%
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \!taDimenA \StrutHeightFactor\StrutUnit
+ \advance \!taDimenA \StrutDepthFactor\StrutUnit
+ \divide \!taDimenA 2
+ \else
+ \!taDimenA \!tgValue\StrutUnit
+ \fi
+ \else
+ \!taDimenA \!tgValue
+ \fi
+ \!taDimenA=\!thSign\!taDimenA\relax
+ %
+ % BRANCH ON MODE
+ \ifmmode
+ \expandafter\mathpalette
+ \expandafter\!thDoMathRaise
+ \else
+ \expandafter\!thDoSimpleRaise
+ \fi}
+
+% DO SIMPLE RAISE
+\def\!thDoSimpleRaise#1{%
+ \setbox\z@\hbox{\raise \!taDimenA\hbox{#1}}%
+ \!thFinishRaise} % From Plain TeX: \ht0=0pt \dp0=0pt \box0
+
+% DO MATH RAISE
+\def\!thDoMathRaise#1#2{%
+ \setbox\z@\hbox{\raise \!taDimenA\hbox{$\m@th#1{#2}$}}%
+ \!thFinishRaise}
+
+% FINISH RAISE. This is the same as Plain's \finsm@sh; some macro
+% packages redefine \finsm@sh.
+\def\!thFinishRaise{%
+ \ht\z@\z@
+ \dp\z@\z@
+ \box\z@}
+
+
+% ***************************************************************
+% BACK SPACE
+% ***************************************************************
+\def\BackSpace{%
+ \!tgGetValue\!thKernBack}
+
+\def\!thKernBack{%
+ \kern -
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \the\KernFactor
+ \else
+ \!tgValue % user-specified integer
+ \fi
+ \KernUnit
+ \else
+ \!tgValue % user-specified dimension
+ \fi
+ \ignorespaces}%
+
+
+% ***************************************************************
+% Vspace
+% ***************************************************************
+\def\Vspace{%
+ \noalign
+ \bgroup
+ \!tgGetValue\!thVspace}
+
+\def\!thVspace{%
+ \vskip
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \the\VspaceFactor
+ \else
+ \!tgValue % user-specified integer
+ \fi
+ \StrutUnit
+ \else
+ \!tgValue % user-specified skip
+ \fi
+ \egroup} % Ends the \noalign
+
+% *********************************************************************
+% SECTION F: FORMAT
+% *********************************************************************
+
+% As explained in Section 3.3 of the manual, TABLE alternates each
+% of the user's "data" columns with a "rule" column; moreover, TABLE
+% places a "dummy data" column at the left and right of a table.
+% A table with n nominal data columns therefore actually has a
+% total of
+% n (nominal data columns)
+% +(n+1) (rule columns)
+% + 2 (dummy data columns)
+% ____
+% 2n+3
+% columns.
+
+% FORMATs job is to create an \halign preamble for the alignment
+% of these (2n+3) columns. The preamble consists of templates
+% for the various columns, strung together with &'s and interlaced
+% with \tabskip glue specifications.
+
+% FORMAT constructs the template for a nomimal data column according
+% to the user-specified format keys. As the keys are read from left
+% to right, the template is built up "from the inside out" (as
+% illustrated in Section 3.1.9 of the manual), the inner-most part
+% being the "#" sign. A "|" in the format terminates template
+% building; the completed template is adjoined to preamble along
+% with the template for the following rule column.
+
+% Minimum column widths, if specified, are implemented by creating
+% an "artificial row" with data entries of the form
+% \hskip <minimum column width>.
+% This row has zero height and depth and is completely invisible.
+
+
+% BEGIN FORMAT
+\def\BeginFormat{%
+ \catcode`\|=12 % Inhibit expansion if | immediately follows a <number>
+ \catcode`\"=12 % read by \getvalue.
+ \!taPreamble={}%
+ \!taColumnNumber=0
+ \skip0 =\InterColumnSpaceUnit
+ \multiply\skip0 \InterColumnSpaceFactor
+ \divide\skip0 2
+ \!taRuleColumnTemplate=\!thx{%
+ \!thx\tabskip\the\skip0 }%
+ \!taLastRegularTabskip=\skip0
+ \!taOnceOnlyTabskipfalse
+ \!taBeginFormattrue % Used to intercept key "]"
+ \def\!tfRowOfWidths{}% Artificial Table Row with horizontal struts
+ % to enforce specified minimum column widths
+ \ReadFormatKeys}
+
+% SET (MINIMUM COLUMN) WIDTH: Invoked by the key "w".
+\def\!tfSetWidth{%
+ \ifx \!tfRowOfWidths \empty % true if no prior "w" keys
+ \ifnum \!taColumnNumber>0 % true if "w" key is to right of first "|"
+ \begingroup % RowOfWidths={&\omit || n copies of
+ % &\omit&\omit}, where n = number of columns
+ \!taCountA=1 % to the left of this one
+ \aftergroup \edef \aftergroup \!tfRowOfWidths \aftergroup {%
+ \aftergroup &\aftergroup \omit
+ \!thLoop
+ \ifnum \!taCountA<\!taColumnNumber
+ \advance\!taCountA 1
+ \aftergroup \!tfAOAO
+ \repeat
+ \aftergroup }%
+ \endgroup
+ \fi
+ \fi
+ \ifx [\!ttemp % \!tgGetValue sets \!ttemp = token after w
+ \!thx\!tfSetWidthText
+ \else
+ \!thx\!tfSetWidthValue
+ \fi}
+
+% AOAO = (Apersand Omit Ampersand Omit)
+\def\!tfAOAO{%
+ &\omit&\omit}
+
+% SET WIDTH TEXT
+\def\!tfSetWidthText [#1]{% #1 = specified text
+ \def\!tfWidthText{#1}%
+ \ReadFormatKeys}
+
+% SET WIDTH VALUE
+\def\!tfSetWidthValue{%
+ \!taMinimumColumnWidth =
+ \ifnum \!tgCode=1
+ \ifx\!tgValue\empty % Use default multiplier if user didn't specify one
+ \ColumnWidthFactor
+ \else
+ \!tgValue
+ \fi
+ \ColumnWidthUnit
+ \else
+ \!tgValue
+ \fi
+ \def\!tfWidthText{}% Override possible prior `w[sample entry]'
+ \ReadFormatKeys}
+
+
+% SET TABSKIP: Invoked by the tabskip keys "t" and "o"
+\def\!tfSetTabskip{%
+ \ifnum \!tgCode=1
+ \skip0 =\InterColumnSpaceUnit
+ \multiply\skip0
+ \ifx \!tgValue\empty
+ \InterColumnSpaceFactor % Default integer
+ \else
+ \!tgValue % User-specified integer
+ \fi
+ \else
+ \skip0 =\!tgValue % User-specified <skip>
+ \fi
+ \divide\skip0 by 2
+ \ifnum\!taColumnNumber=0
+ \!thToksEdef\!taRuleColumnTemplate={%
+ \the\!taRuleColumnTemplate
+ \tabskip \the\skip0 }
+ \else
+ \!thToksEdef\!taDataColumnTemplate={%
+ \the\!taDataColumnTemplate
+ \tabskip \the\skip0 }
+ \fi
+ \if!taOnceOnlyTabskip
+ % % Tabskip used at right of this col only
+ \else
+ \!taLastRegularTabskip=\skip0 % Remember this Tabskip, for possible
+ \fi % restoration after a subsequent"OnceOnly"
+ \ReadFormatKeys}
+
+
+% SET VRULE: Invoked by the key "|"
+\def\!tfSetVrule{%
+ \!thToksEdef\!taRuleColumnTemplate={%
+ \noexpand\hfil
+ \noexpand\vrule
+ \noexpand\!thWidth
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \the\LineThicknessFactor % Default integer
+ \else
+ \!tgValue % User-specified integer
+ \fi
+ \!taLTU % \LineThicknessUnit
+ \else
+ \!tgValue % User-specified dimension
+ \fi
+ ####%
+ \noexpand\hfil
+ \the\!taRuleColumnTemplate} % has \tabskips, when column number=0
+ \!tfAdjoinPriorColumn}
+
+% SET ALTERNATE VRULE: Invoked by the key "\|", in the form
+% \|{<template for (rule) column>}. The "{" and "}" are mandatory,
+% and the <template for column> must contain a "#". The key system
+% CAN'T be used to set up this template. The <template> can have the
+% form "\span\macro".
+\def\!tfSetAlternateVrule{%
+ \afterassignment\!tfSetAlternateA
+ \toks0 =} % Put template into \toks0
+
+\def\!tfSetAlternateA{%
+ \!thToksEdef\!taRuleColumnTemplate={%
+ \the\toks0 \the\!taRuleColumnTemplate} % RCT may have \tabskips
+ \!tfAdjoinPriorColumn}
+
+% ADJOIN PRIOR COLUMN
+\def\!tfAdjoinPriorColumn{%
+ \ifnum \!taColumnNumber=0
+ \!taPreamble=\!taRuleColumnTemplate % New \tabskip may have been added
+ \ifnum \TracingFormats>0
+ \!tfShowRuleTemplate
+ \fi
+ \else
+ \ifx\!tfRowOfWidths\empty % no "w" keys specified yet, not even this col
+ \else
+ \!tfUpdateRowOfWidths
+ \fi
+ % Adjoin positioning glues to left and right of template
+ \!thToksEdef\!taDataColumnTemplate={%
+ \the \!taLeftGlue
+ \the \!taDataColumnTemplate
+ \the \!taRightGlue}
+ \ifnum \TracingFormats>0
+ \!tfShowTemplates
+ \fi
+ % Adjoin data- and rule-column templates to preamble
+ \!thToksEdef\!taPreamble={%
+ \the\!taPreamble
+ &
+ \the\!taDataColumnTemplate
+ &
+ \the\!taRuleColumnTemplate}
+ \fi
+%
+% START NEW COLUMN
+ \advance \!taColumnNumber 1
+ % Initialize data-column template, restoring last "regular" tabskip
+ % after a "once only" tabskip
+ \if!taOnceOnlyTabskip
+ \!thToksEdef\!taDataColumnTemplate={%
+ ####\tabskip \the\!taLastRegularTabskip}
+ \else
+ \!taDataColumnTemplate{##}%
+ \fi
+ % Remaining initializations
+ \!taRuleColumnTemplate{}% # is inserted by \SetVrule, or \SetAlternateVrule
+ \!taLeftGlue{\hfil}% % Default positioning is "center"
+ \!taRightGlue{\hfil}%
+ \!taMinimumColumnWidth=0pt
+ \def\!tfWidthText{}%
+ \!taOnceOnlyTabskipfalse % Set true by key "o"
+ \ReadFormatKeys}
+
+% UPDATE ROW OF WIDTHS
+\def\!tfUpdateRowOfWidths{%
+ % If user had a "w[<Text>]" key, set <Text> according to the
+ % template for this column, and find the width of the result
+ \ifx \!tfWidthText\empty
+ \else % set specified text according to current template & find width
+ \!tfComputeMinColWidth
+ \fi
+ \edef\!tfRowOfWidths{%
+ \!tfRowOfWidths
+ &%
+ \omit % Data Column
+ \ifdim \!taMinimumColumnWidth>0pt
+ \hskip \the\!taMinimumColumnWidth
+ \fi
+ &
+ \omit}} % Rule Column
+
+% COMPUTE MINIMUM COLUMN WIDTH (from specified WidthText)
+\def\!tfComputeMinColWidth{%
+ \setbox0 =\vbox{%
+ \ialign{% Plain's initialized \halign; \tabskip=0pt \everycr={}
+ \span\the\!taDataColumnTemplate\cr
+ \!tfWidthText\cr}}%
+ \!taMinimumColumnWidth=\wd0 }
+
+% SHOW (INITIAL) RULE TEMPLATE
+\def\!tfShowRuleTemplate{%
+ \!thMessage{}
+ \!thMessage{TABLE FORMAT}
+ \!thMessage{Column: Template}
+ \!thMessage{%
+ \space *c: ##\tabskip \the\LeftTabskip}
+ \!taOldRuleColumnTemplate=\!taRuleColumnTemplate}
+
+% SHOW TEMPLATES
+\def\!tfShowTemplates{%
+ \!thMessage{%
+ \space \space r: \the\!taOldRuleColumnTemplate}
+ \!taOldRuleColumnTemplate=\!taRuleColumnTemplate
+ \!thMessage{%
+ \ifnum \!taColumnNumber<10
+ \space
+ \fi
+ \the\!taColumnNumber c: \the\!taDataColumnTemplate}
+ \ifdim\!taMinimumColumnWidth>0pt
+ \!thMessage{%
+ \space \space w: \the\!taMinimumColumnWidth}
+ \fi}
+
+
+% FINISH UP: Invoked by the keys "." and \EndFormat
+\def\!tfFinishFormat{%
+ \ifnum \TracingFormats>0
+ \!thMessage{%
+ \space \space r: \the\!taOldRuleColumnTemplate
+ \tabskip \the\RightTabskip}%
+ \!thMessage{%
+ \space *c: ##\tabskip 0pt}
+ \fi
+ \ifnum \!taColumnNumber<2
+ \!thError{%
+ \ifnum \!taColumnNumber=0
+ No
+ \else
+ Only 1
+ \fi
+ "|"}%
+ {\!thReadErrorMsg\!tfTooFewBarsA
+ ^^J\!thReadErrorMsg\!tfTooFewBarsB
+ ^^J\!thReadErrorMsg\!tkFixIt}%
+ \fi
+ \!thToksEdef\!taPreamble={%
+ ####\tabskip\LeftTabskip
+ &
+ \the\!taPreamble \tabskip\RightTabskip
+ &
+ ####\tabskip 0pt \cr}
+ \ifnum \TracingFormats>1
+ \!thMessage{Preamble=\the\!taPreamble}
+ \fi
+ \ifnum \TracingFormats>2
+ \!thMessage{Row Of Widths="\!tfRowOfWidths"}
+ \fi
+ \!taBeginFormatfalse % Intercepts "|", tabskips, and "."
+ \catcode`\|=13
+ \catcode`\"=13
+ \!ttDoHalign}
+
+% ERROR MESSAGE FOR NOT ENOUGH "|"'s
+\!thStoreErrorMsg\!tfTooFewBarsA{%
+ There must be at least 2 "|"'s (and/or "\string \|"'s)}
+\!thStoreErrorMsg\!tfTooFewBarsB{%
+ between \string\BeginFormat\space and \string\EndFormat\space (or ".").}
+
+
+% REFORMAT [<key letters>]{<text>}: Formats <text> according to
+% <key letters>. Used to override the template for a column,
+% or columns when used after \use.
+\def\ReFormat[{%
+ \omit
+ \!taDataColumnTemplate{##}%
+ \!taLeftGlue{}%
+ \!taRightGlue{}%
+ \catcode`\|=12 % Inhibit expansion if | immediately follows a <number>
+ \catcode`\"=12 % read by \getvalue. Actually, '|' and '"' shouldn't
+ \ReadFormatKeys}% appear in a \ReFormat cmd; this is here as a safeguard.
+
+% END REFORMAT: Invoked by the key "]"
+\def\!tfEndReFormat{%
+ \ifnum \TracingFormats>0
+ \!thMessage{ReF:
+ \the\!taLeftGlue
+ \hbox{\the\!taDataColumnTemplate}% White lie
+ \the\!taRightGlue}
+ \fi
+ \catcode`\|=13
+ \catcode`\"=13
+ \!tfReFormat}
+
+\def\!tfReFormat#1{%
+ \the \!taLeftGlue
+ \vbox{%
+ \ialign{%
+ \span\the\!taDataColumnTemplate\cr
+ #1\cr}}%
+ \the \!taRightGlue}
+
+
+
+% *********************************************************************
+% SECTION G: GET VALUE
+% *********************************************************************
+
+% GET_VALUE{<return macro>}<tokens> functions as follows:
+
+% If <tokens> has the form <(stuff)>, then
+% code=2 and value=<stuff>
+
+% Otherwise <tokens> has the form <DDDXYZ> where <DDD> denotes (a possibly
+% empty) string of consecutive digits (0,1,2,...,9) terminated by the first
+% character <X> (possibly a blank) that is not a digit. In this case
+% code=1 and value=<DDD> (= <null>, if <DDD> is non-empty).
+
+% Examples: Code Value
+% "\GetValue{\macro} 3" 1 null
+% "\GetValue{\macro}A " 1 null
+% "\GetValue{\macro}1 " 1 1
+% "\GetValue{\macro}25A" 1 25
+% "\GetValue{\macro}25012 " 1 25012
+% "\GetValue{\macro}(10pt)" 2 10pt
+% "\GetValue{\macro}(1in)" 2 1in
+% "\GetValue{\macro} (1in)" 1 null
+
+
+% GET_VALUE{<macro to execute after value is found>}
+\def\!tgGetValue#1{%
+ \def\!tgReturn{#1}% Set return
+ \futurelet\!ttemp\!tgCheckForParen}% Now \!ttemp is the token
+ % immediately after {}
+
+% CHECK_PAREN: See if \!ttemp is a (
+\def\!tgCheckForParen{%
+ \ifx\!ttemp (%
+ \!thx \!tgDoParen
+ \else
+ \!thx \!tgCheckForSpace
+ \fi}
+
+% DO_PAREN: Set code to 2, value to stuff inside ( )'s
+\def\!tgDoParen(#1){%
+ \def\!tgCode{2}%
+ \def\!tgValue{#1}% NOTE #1 MUST BE A LEGITIMATE VALUE
+ \!tgReturn}
+
+% CHECK_SPACE: See if \!ttemp is a <blank space>
+\def\!tgCheckForSpace{%
+ \def\!tgCode{1}%
+ \def\!tgValue{}% Initialize value to <null>
+ \ifx\!ttemp\!thSpaceToken
+ \!thx \!tgReturn % <blank space> means no value was specified
+ \else
+ \!thx \!tgCheckForDigit
+ \fi}
+
+% CHECK_DIGIT: \!ttemp is not a <blank space>; if its a digit (0,1,...,9)
+% get the <number> starting with that digit.
+\def\!tgCheckForDigit{%
+ \!taDigitfalse
+ \ifx 0\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 1\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 2\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 3\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 4\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 5\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 6\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 7\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 8\!ttemp
+ \!taDigittrue
+ \else
+ \ifx 9\!ttemp
+ \!taDigittrue
+ \fi
+ \fi
+ \fi
+ \fi
+ \fi
+ \fi
+ \fi
+ \fi
+ \fi
+ \fi
+ \if!taDigit
+ \!thx \!tgGetNumber
+ \else
+ \!thx \!tgReturn
+ \fi}
+
+% GET_NUMBER
+\def\!tgGetNumber{%
+ \afterassignment\!tgGetNumberA
+ \!taCountA=}
+\def\!tgGetNumberA{%
+ \edef\!tgValue{\the\!taCountA}%
+ \!tgReturn}
+
+
+% ********************************************************************
+% MISCELANEOUS "RETURNS" FROM \getvalue
+% ********************************************************************
+
+% SET UP PAR BOX: Puts \BeginTableParBox{<user-specified \hsize>}
+% to the left of "#" and \EndTableParBox to the right of "#".
+\def\!tgSetUpParBox{%
+ \edef\!ttemp{%
+ \noexpand \ReadFormatKeys
+ b{\noexpand \BeginTableParBox{%
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \the\ColumnWidthFactor
+ \else
+ \!tgValue % user-specified integer
+ \fi
+ \!taCWU % \ColumnWidthUnit
+ \else
+ \!tgValue % user-specified dimension
+ \fi}}}%
+ \!ttemp
+ a{\EndTableParBox}}
+
+% SET KERNS
+\def\!tgInsertKern{%
+ \edef\!ttemp{%
+ \kern
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \the\KernFactor
+ \else
+ \!tgValue % user-specified integer
+ \fi
+ \!taKU % \KernUnit
+ \else
+ \!tgValue % user-specified dimension
+ \fi}%
+ \edef\!ttemp{%
+ \noexpand\ReadFormatKeys
+ \ifh@ % true if kern goes to left of "#"
+ b{\!ttemp}
+ \fi
+ \ifv@ % true if kern goes to right of "#"
+ a{\!ttemp}
+ \fi}%
+ \!ttemp}
+
+% *********************************************************************
+% SECTION K: KEYS
+% *********************************************************************
+
+% ****************************************************************
+% DEFINING NEW KEYS
+% ****************************************************************
+
+% NEW FORMAT KEY <Key Letter>: Must be followed by
+% <Parameter Text> <Replacement Text>
+% Sets up a new key letter command by expanding (essentially) to
+% \expandafter \def \csname !tk<Key Letter>\endcsname
+% <Parameter Text>{<Replacement Text>}
+% A warning message is issued if <Key Letter> is already in use.
+\def\NewFormatKey#1{%
+ \!thx\def\!thx\!ttempa\!thx{\string #1}%
+ \!thx\def\!thx\!ttempb\!thx{\csname !tk<\!ttempa>\endcsname}%
+ \ifnum \TracingKeys>0
+ \!tkReportNewKey
+ \fi
+ \!thx\ifx \!ttempb \relax
+ \!thx\!tkDefineKey
+ \else
+ \!thx\!tkRejectKey
+ \fi}
+
+% REPORT NEW KEY
+\def\!tkReportNewKey{%
+ \!taToksA\!thx{\!ttempa}%
+ \!thMessage{NEW KEY: "\the\!taToksA"}}
+
+% DEFINE KEY
+\def\!tkDefineKey{%
+ \!thx\def\!ttempb}%
+
+% DUPLICATE KEY
+\def\!tkRejectKey{%
+ \!taToksA\!thx{\!ttempa}%
+ \!thError{Key letter "\the\!taToksA" already used}
+ {\!thReadErrorMsg\!tkFixIt}
+ \def\!tkGarbage}%
+
+% ERROR MESSAGE FOR DUPLICATE KEY
+\!thStoreErrorMsg\!tkFixIt{%
+ You'd better type \space 'E' \space and fix your file.}
+
+
+% ****************************************************************
+% READING FORMAT KEYS
+% ****************************************************************
+
+% READ FORMAT KEYS
+\def\ReadFormatKeys#1{%
+ \!thx\def\!thx\!ttempa\!thx{\string #1}%
+ \!thx\def\!thx\!ttempb\!thx{\csname !tk<\!ttempa>\endcsname}%
+ \ifnum \TracingKeys>1
+ \!tkReportKey
+ \fi
+ \!thx\ifx \!ttempb\relax
+ \!thx\!tkReplaceKey
+ \else
+ \!thx\!ttempb
+ \fi}
+
+% REPORT KEY
+\def\!tkReportKey{%
+ \!taToksA\!thx{\!ttempa}%
+ \!thMessage{KEY: "\the\!taToksA"}}
+
+% REPLACE KEY
+\def\!tkReplaceKey{%
+ \!taToksA\!thx{\!ttempa}%
+ \!thError {Undefined format key "\the\!taToksA"}
+ {\!thReadErrorMsg\!tkUndefined ^^J\!thReadErrorMsg\!tkBadKey}
+ \!tkReplaceKeyA}
+
+\def\!tkReplaceKeyA{%
+ \!thGetReplacement{\!thReadErrorMsg\!tkReplace}\!tkReplacement
+ \!thx\ReadFormatKeys\!tkReplacement}
+
+% ERROR MESSAGES FOR KEY RELACEMENT
+\!thStoreErrorMsg\!tkUndefined{%
+ The format key in " "'s on the next to top line is undefined.}
+\!thStoreErrorMsg\!tkBadKey{%
+ Type \space E \space to quit now, or
+ \space<CR> \space and respond to next prompt.}
+\!thStoreErrorMsg\!tkReplace{%
+ Type \space<replacement key><CR> \space,
+ or simply \space<CR> \space to skip offending key:}
+
+
+% ****************************************************************
+% PRIMITIVE KEYS
+% ****************************************************************
+
+% Key "b": b{TOKENS} adds TOKENS to the left of (before) the template
+\NewFormatKey b#1{%
+ \!thx\!tkJoin\!thx{\the\!taDataColumnTemplate}{#1}%
+ \ReadFormatKeys}
+
+\def\!tkJoin#1#2{%
+ \!taDataColumnTemplate{#2#1}}%
+
+% Key "a": a{TOKENS} adds TOKENS to the right of (after) the template
+\NewFormatKey a#1{%
+ \!taDataColumnTemplate\!thx{\the\!taDataColumnTemplate #1}%
+ \ReadFormatKeys}
+
+% Key "\{": Enclose template in braces.
+\NewFormatKey \{{%
+ \!taDataColumnTemplate=\!thx{\!thx{\the\!taDataColumnTemplate}}%
+ \ReadFormatKeys}
+
+% Key "*": "*{N}{KEY LETTERS}" is equivalent to specifying
+% <KEY LETTERS> N times.
+% KEY LETTERS may contain further * specifications
+\NewFormatKey *#1#2{%
+ \!taCountA=#1\relax
+ \!taToksA={}%
+ \!thLoop
+ \ifnum \!taCountA > 0
+ \!taToksA\!thx{\the\!taToksA #2}%
+ \advance\!taCountA -1
+ \repeat
+ \!thx\ReadFormatKeys\the\!taToksA}
+
+
+% ****************************************************************
+% POSITIONING KEYS
+% ****************************************************************
+
+% Key "\LeftGlue": Specifies the glue (usually \hfil, or nothing) to be
+% added to extreme left of the template to position a column
+\NewFormatKey \LeftGlue#1{%
+ \!taLeftGlue{#1}%
+ \ReadFormatKeys}
+
+% Key "\RightGlue": Specifies the glue (usually \hfil, or nothing) to be
+% added to the extreme right of the template to position a column
+\NewFormatKey \RightGlue#1{%
+ \!taRightGlue{#1}%
+ \ReadFormatKeys}
+
+% Key "c": Centered column.
+\NewFormatKey c{%
+ \ReadFormatKeys
+ \LeftGlue\hfil
+ \RightGlue\hfil}
+
+% Key "l": Left-adjusted column.
+\NewFormatKey l{%
+ \ReadFormatKeys
+ \LeftGlue{} % In case more than one positioning key is specified.
+ \RightGlue\hfil}
+
+% Key "r": Right-adjusted column.
+\NewFormatKey r{%
+ \ReadFormatKeys
+ \LeftGlue\hfil
+ \RightGlue{}}
+
+% Key "k": Adds kerns to left and right of "#"
+% This key and the two below use Plain TeX's \if@h as if it were \if@left,
+% and \if@v as if it were \if@right. Table making goes on in a group,
+% so even in the unlikely circumstance that a \phantom is currently under
+% construction, there's no problem.
+\NewFormatKey k{%
+ \h@true
+ \v@true
+ \!tgGetValue{\!tgInsertKern}}
+
+% Key "i": Adds a kern to the left of "#"
+\NewFormatKey i{%
+ \h@true
+ \v@false
+ \!tgGetValue{\!tgInsertKern}}
+
+% Key "j": Adds a kern to the right of "#"
+\NewFormatKey j{%
+ \h@false
+ \v@true
+ \!tgGetValue{\!tgInsertKern}}
+
+
+% ****************************************************************
+% NUMERIC ITEM KEYS
+% ****************************************************************
+
+% Key "n": numeric item , non-math mode.
+\NewFormatKey n{%
+ \def\!tnStyle{}%
+ \futurelet\!tnext\!tnTestForBracket}
+
+% Key "N": numeric item, math mode.
+\NewFormatKey N{%
+ \def\!tnStyle{$}%
+ \futurelet\!tnext\!tnTestForBracket}
+
+
+% ****************************************************************
+% ATTRIBUTE KEYS
+% ****************************************************************
+
+% Key "m": Math mode.
+\NewFormatKey m{%
+ \ReadFormatKeys b$ a$}
+
+% Key "M": Displaymath mode.
+\NewFormatKey M{%
+ \ReadFormatKeys \{ b{$\displaystyle} a$}
+
+% Key "\m": Template ${}#\hfil$
+\NewFormatKey \m{%
+ \ReadFormatKeys l b{{}} m}
+
+% Key "\M": Template $\displaystyle{{}#\hfil}$
+\NewFormatKey \M{%
+ \ReadFormatKeys l b{{}} M}
+
+% Key "f": Set font (E.g., f\it sets up italic font (assuming \it
+% has its usual meaning)
+\NewFormatKey f#1{%
+ \ReadFormatKeys b{#1}}
+
+% Key "B": abbreviation for f\bf
+\NewFormatKey B{%
+ \ReadFormatKeys f\bf}
+
+% Key "I": abbreviation for f\it
+\NewFormatKey I{%
+ \ReadFormatKeys f\it}
+
+% Key "S": abbreviation for f\sl
+\NewFormatKey S{%
+ \ReadFormatKeys f\sl}
+
+% Key "R": abbreviation for f\rm
+\NewFormatKey R{%
+ \ReadFormatKeys f\rm}
+
+% Key "T": abbreviation for f\tt
+\NewFormatKey T{%
+ \ReadFormatKeys f\tt}
+
+% Key "p": ParBox
+\NewFormatKey p{%
+ \!tgGetValue{\!tgSetUpParBox}}
+
+
+% ****************************************************************
+% MINIMUM COLUMN WIDTH KEY
+% ****************************************************************
+
+% Key "w": minimum column width
+\NewFormatKey w{%
+ \!tkTestForBeginFormat w{\!tgGetValue{\!tfSetWidth}}}
+
+
+% ****************************************************************
+% TABSKIP KEYS
+% ****************************************************************
+
+% Key "s": Set tabskip for the inter-column space to the right
+% of the current column, and all subsequent spaces, until overriden
+% by a new "s" or "o" key.
+\NewFormatKey s{%
+ \!taOnceOnlyTabskipfalse % in case same column has a prior "o" key
+ \!tkTestForBeginFormat t{\!tgGetValue{\!tfSetTabskip}}}
+
+% Key "o": Apply the \tabskip stated for this column ONLY to the
+% inter-column space just to the right of this column; restore the
+% the previous \tabskip for subsequent columns.
+\NewFormatKey o{%
+ \!taOnceOnlyTabskiptrue
+ \!tkTestForBeginFormat o{\!tgGetValue{\!tfSetTabskip}}}
+
+
+% ****************************************************************
+% RULE KEYS
+% ****************************************************************
+
+% Key "|": Standard rule column designator
+\NewFormatKey |{%
+ \!tkTestForBeginFormat |{\!tgGetValue{\!tfSetVrule}}}
+
+% Key "\|": Non-standard rule column designator
+\NewFormatKey \|{%
+ \!tkTestForBeginFormat \|{\!tfSetAlternateVrule}}
+
+
+% ****************************************************************
+% END-OF-FORMAT KEYS
+% ****************************************************************
+
+% Key ".": PERIOD -- end of \BeginFormat section.
+\NewFormatKey .{%
+ \!tkTestForBeginFormat.{\!tfFinishFormat}}
+
+% Key "\EndFormat": Equivalent to "."
+\NewFormatKey \EndFormat{%
+ \!tkTestForBeginFormat\EndFormat{\!tfFinishFormat}}
+
+% Key "]": End of \ReFormat section
+\NewFormatKey ]{%
+ \!tkTestForReFormat ] \!tfEndReFormat}
+
+
+% ****************************************************************
+% VALIDITY CHECKS
+% ****************************************************************
+
+% TEST FOR BEGIN FORMAT{<Key>}{Intended Action}: This test is run
+% on keys that can only be used by \BeginFormat --- "s", "o",
+% "|", "\|", "w", ".", and "\EndFormat".
+\def\!tkTestForBeginFormat#1#2{%
+ \if!taBeginFormat
+ \def\!ttemp{#2}%
+ \!thx \!ttemp
+ \else
+ \toks0={#1}%
+ \toks2=\!thx{\string\ReFormat}%
+ \!thx \!tkImproperUse
+ \fi}
+
+% TEST FOR RE FORMAT{<Key>}{Intended Action}: This test is run
+% on the key "]", which can only be used by \ReFormat.
+\def\!tkTestForReFormat#1#2{%
+ \if!taBeginFormat
+ \toks0={#1}%
+ \toks2=\!thx{\string\BeginFormat}%
+ \!thx \!tkImproperUse
+ \else
+ \def\!ttemp{#2}%
+ \!thx \!ttemp
+ \fi}
+
+% IMPROPER USE OF KEY
+\def\!tkImproperUse{%
+ \!thError{\!thReadErrorMsg\!tkBadUseA "\the\toks0 "}%
+ {\!thReadErrorMsg\!tkBadUseB \the\toks2 \space command.
+ ^^J\!thReadErrorMsg\!tkBadKey}%
+ \!tkReplaceKeyA}
+
+% ERROR MESSAGES FOR IMPROPER USE OF KEY
+\!thStoreErrorMsg\!tkBadUseA{Improper use of key }
+\!thStoreErrorMsg\!tkBadUseB{%
+ The key mentioned above can't be used in a }
+
+
+
+% *********************************************************************
+% SECTION n: NUMERIC
+% *********************************************************************
+
+% NOTE: THE SPACE BETWEEN A NUMERIC ENTRY AND THE FOLLOWING '|', '"',
+% OR '\|' IS MANDATORY.
+% EMPTY NUMERIC ENTRIES ARE NOT ALLOWED: USE '{}' OR '\omit' INSTEAD.
+
+% TEST FOR BRACKET: Invoked by the keys "n" and "N".
+\def\!tnTestForBracket{%
+ \ifx [\!tnext
+ \!thx\!tnGetArgument
+ \else
+ \!thx\!tnGetCode
+ \fi}
+
+% GET CODE: E.g. "4", or "4.0", "0.4", or "10.2"
+\def\!tnGetCode#1 {% NOTE THE BLANK
+ \!tnConvertCode #1..!}
+
+% CONVERT CODE: E.g. converts above to [0000], [0000.], [.0000],
+% [0000000000.00]
+\def\!tnConvertCode #1.#2.#3!{%
+ \begingroup
+ \aftergroup\edef \aftergroup\!ttemp \aftergroup{%
+ \aftergroup[%
+ \!taCountA #1
+ \!thLoop
+ \ifnum \!taCountA>0
+ \advance\!taCountA -1
+ \aftergroup0
+ \repeat
+ \def\!ttemp{#3}%
+ \ifx\!ttemp \empty
+ \else
+ \aftergroup.
+ \!taCountA #2
+ \!thLoop
+ \ifnum \!taCountA>0
+ \advance\!taCountA -1
+ \aftergroup0
+ \repeat
+ \fi
+ \aftergroup]\aftergroup}%
+ \endgroup\relax
+ \!thx\!tnGetArgument\!ttemp}
+
+% GET ARGUMENT: [<sample left field> <optional .<sample right field>>
+\def\!tnGetArgument[#1]{%
+ \!tnMakeNumericTemplate\!tnStyle#1..!}
+
+% MAKE NUMERIC TEMPLATE
+\def\!tnMakeNumericTemplate#1#2.#3.#4!{% #1=<empty> or $
+ \def\!ttemp{#4}%
+ \ifx\!ttemp\empty
+ \!taDimenC=0pt
+ \else
+ \setbox0=\hbox{\m@th #1.#3#1}%
+ \!taDimenC=\wd0
+ \fi
+ \setbox0 =\hbox{\m@th #1#2#1}%
+ \!thToksEdef\!taDataColumnTemplate={%
+ \noexpand\!tnSetNumericItem
+ {\the\wd0 }%
+ {\the\!taDimenC}%
+ {#1}%
+ \the\!taDataColumnTemplate} % Might have tabskip glue in here
+ \ReadFormatKeys}
+
+% SET NUMERIC ITEM
+\def\!tnSetNumericItem #1#2#3#4 {% NOTE THE BLANK
+ \!tnSetNumericItemA {#1}{#2}{#3}#4..!}
+
+\def\!tnSetNumericItemA #1#2#3#4.#5.#6!{%
+ \def\!ttemp{#6}%
+ \hbox to #1{\hss \m@th #3#4#3}%
+ \hbox to #2{%
+ \ifx\!ttemp\empty
+ \else
+ \m@th #3.#5#3%
+ \fi
+ \hss}}
+
+
+
+% *********************************************************************
+% SECTION S: STRUTS
+% *********************************************************************
+
+% The following are in ALLOCATIONS
+ %\newdimen\StrutUnit (normal value \normalbaselineskip / 11)
+ %\newcount\StrutHeightFactor (normal value 8)
+ %\newcount\StrutDepthFactor (normal value 3)
+
+% MAKE STRUT OF SPECIFIED HEIGHT AND DIMENSION
+% \MakeStrut <height><depth>; height and depth are <dimen>'s
+\def\MakeStrut#1#2{%
+ \vrule width0pt height #1 depth #2}
+
+% STANDARD VERTICAL STRUT
+% Makes a strut of height=StrutHeightFactor*StrutUnit
+% depth =StrutDepthFactor *StrutUnit
+\def\StandardTableStrut{%
+ \MakeStrut{\StrutHeightFactor\StrutUnit}
+ {\StrutDepthFactor\StrutUnit}}
+
+
+% STANDARD VERTICAL STRUT, WITH EXTRA HEIGHT/DEPTH
+% \AugmentedTableStrut<multiple for extra height><multiple for extra depth>
+% makes a strut of height=(StrutHeightFactor+#1)*StrutUnit
+% depth =(StrutDepthFactor+#2)*StrutUnit
+\def\AugmentedTableStrut#1#2{%
+ \dimen@=\StrutHeightFactor\StrutUnit
+ \advance\dimen@ #1\StrutUnit
+ \dimen@ii=\StrutDepthFactor\StrutUnit
+ \advance\dimen@ii #2\StrutUnit
+ \MakeStrut{\dimen@}{\dimen@ii}}
+
+
+% ENLARGE<extra height><extra depth><original>
+% Enlarges "original" by extra height and extra depth.
+% Extra height and extra depth are <dimen>'s.
+% Works for various math styles, and takes into account
+% \spacefactor in horizontal mode
+\def\Enlarge#1#2{% 3rd argument is picked up later
+ % #1=extra height
+ % #2=extra depth
+ \!taDimenA=#1\relax
+ \!taDimenB=#2\relax
+ \let\!TsSpaceFactor=\empty
+ \ifmmode
+ \!thx \mathpalette
+ \!thx \!TsEnlargeMath
+ \else
+ \!thx \!TsEnlargeOther
+ \fi}
+
+\def\!TsEnlargeOther#1{%
+ \ifhmode
+ \setbox\z@=\hbox{#1%
+ \xdef\!TsSpaceFactor{\spacefactor=\the\spacefactor}}%
+ \else
+ \setbox\z@=\hbox{#1}%
+ \fi
+ \!TsFinishEnlarge}
+
+\def\!TsEnlargeMath#1#2{%
+ \setbox\z@=\hbox{$\m@th#1{#2}$}%
+ \!TsFinishEnlarge}
+
+\def\!TsFinishEnlarge{%
+ \dimen@=\ht\z@
+ \advance \dimen@ \!taDimenA
+ \ht\z@=\dimen@
+ \dimen@=\dp\z@
+ \advance \dimen@ \!taDimenB
+ \dp\z@=\dimen@
+ \box\z@ \!TsSpaceFactor{}}
+
+
+% ENLARGE BY MULTIPLES OF StrutUnit
+% \enlarge<multiple for extra height><multiple for extra depth><original>
+% Enlarges by (multiple for extra heigth)*StrutUnit
+% and (multiple for extra depth) *StrutUnit
+\def\enlarge#1#2{% 3rd argument is picked up later
+ \Enlarge{#1\StrutUnit}{#2\StrutUnit}}
+
+
+% OPENUP#1#2: increases strut height and depth factors by #1 and #2.
+\def\OpenUp#1#2{%
+ \advance \StrutHeightFactor #1\relax
+ \advance \StrutDepthFactor #2\relax}
+
+
+
+% *********************************************************************
+% SECTION T: TABLES
+% *********************************************************************
+
+% Table-making is initiated by \BeginTable. After processing that
+% command, TeX absorbs the instructions in the prologue to the table
+% until it gets to \BeginFormat. \BeginFormat sets up the preamble
+% for the \halign that will be used to create the table. \EndFormat
+% initiates the \halign-ment, which is terminated by \EndTable.
+
+
+% *********************************************************************
+% BEGIN TABLE, (DO HALIGN), END TABLE
+% *********************************************************************
+% BEGIN TABLE
+\def\BeginTable{%
+ \futurelet\!tnext\!ttBeginTable}
+
+\def\!ttBeginTable{%
+ \ifx [\!tnext
+ \def\!tnext{\!ttBeginTableA}%
+ \else
+ \def\!tnext{\!ttBeginTableA[c]}%
+ \fi
+ \!tnext}
+
+\def\!ttBeginTableA[#1]{%
+ \if #1u% % "unboxed" table
+ \ifmmode
+ \def\!ttEndTable{% % user had better be in display math mode
+ \relax}% % and have only one table at the outer level
+ \else % user had better be in vertical mode
+ \bgroup
+ \def\!ttEndTable{%
+ \egroup}%
+ \fi
+ \else
+ \hbox\bgroup $
+ \def\!ttEndTable{%
+ \egroup % for the \vtop, \vbox, or \vcenter, yet to come
+ $% for math mode
+ \egroup}% for the \hbox
+ \if #1t%
+ \vtop
+ \else
+ \if #1b%
+ \vbox
+ \else
+ \vcenter % math mode was essential for this
+ \fi
+ \fi
+ \bgroup % for the \vtop, \vbox, or \vcenter
+ \fi
+ \advance\!taRecursionLevel 1 % RecursionLevel governs initialization
+ \let\!ttRightGlue=\relax % This may be changed by \JustCenter, etc
+ \everycr={}
+ \ifnum \!taRecursionLevel=1
+ \!ttInitializeTable
+ \fi}
+
+% INITIALIZE TABLE
+\bgroup
+ \catcode`\|=13
+ \catcode`\"=13
+ \catcode`\~=13
+ \gdef\!ttInitializeTable{%
+ \let\!ttTie=~ % Meanings of ~ and \- are
+ \let\!ttDH=\- % restored by \BeginTableParBox
+ \catcode`\|=\active
+ \catcode`\"=\active
+ \catcode`\~=\active
+ \def |{\unskip\!ttRightGlue&&}% Use rule-column template
+ \def\|{\unskip\!ttRightGlue&\omit\!ttAlternateVrule}%
+ % Override rule-column template
+ \def"{\unskip\!ttRightGlue&\omit&}% Omit rule-column template
+ \def~{\kern .5em}% ~ now has the width of a digit
+ \def\\{\!ttEndOfRow}%
+ \def\-{\!ttShortHrule}%
+ \def\={\!ttLongHrule}%
+ \def\_{\!ttFullHrule}%
+ \def\Left##1{##1\hfill\null}% \null prevents \unskip from
+ \def\Center##1{\hfill##1\hfill\null}% killing the \hfill
+ \def\Right##1{\hfill##1}%
+ \def\use{\!ttuse}%
+ \def\Use{\!ttUse}%
+ \the\EveryTable}
+\egroup
+
+\let\!ttRightGlue=\relax % This may be changed, in a group, by
+ % \JustCenter, etc
+
+% DO HALIGN: Invoked by END FORMAT (or the key ".")
+\def\!ttDoHalign{%
+ \baselineskip=0pt \lineskiplimit=0pt \lineskip=0pt %
+ \tabskip=0pt
+ \halign \the\!taTableSpread \bgroup
+ \span\the\!taPreamble
+ \ifx \!tfRowOfWidths \empty
+ \else
+ \!tfRowOfWidths \cr %
+ \fi}
+
+% END TABLE
+\def\EndTable{%
+ \egroup % finishes the \halign
+ \!ttEndTable}% closes off the table envirnoment set up by \BeginTable
+
+
+% *********************************************************************
+% END OF ROW PROCESSING
+% *********************************************************************
+
+% END OF ROW: When followed by
+% 0, inserts no strut
+% +, inserts an AugmentedTableStrut (with <x-height> and <x-depth>
+% as arguments
+% anything else, inserts a StandardTableStrut,
+% and finished off the row with a \cr.
+\def\!ttEndOfRow{%
+ \futurelet\!tnext\!ttTestForBlank}
+
+% TEST FOR BLANK
+\def\!ttTestForBlank{%
+% \!thMessage{At Test For Blank: \meaning\!tnext}
+ \ifx \!tnext\!thSpaceToken % the "usual" case
+ \!thx\!ttDoStandard
+ \else
+ \!thx\!ttTestForZero
+ \fi}
+
+% TEST FOR ZERO
+\def\!ttTestForZero{%
+ \ifx 0\!tnext
+ \!thx \!ttDoZero
+ \else
+ \!thx \!ttTestForPlus
+ \fi}
+
+% TEST FOR PLUS
+\def\!ttTestForPlus{%
+ \ifx +\!tnext
+ \!thx \!ttDoPlus
+ \else
+ \!thx \!ttDoStandard
+ \fi}
+
+% DO ZERO: No strut
+\def\!ttDoZero#1{% #1 eats the 0
+ \cr}
+
+% DO PLUS: Insert "Extra" strut; #2=extra height, #3=extra depth, both
+% as integers (units of \StrutUnit)
+\def\!ttDoPlus#1#2#3{% #1 eats the +
+ \AugmentedTableStrut{#2}{#3}%
+ \cr}
+
+% DO STANDARD: Insert standard table strut
+\def\!ttDoStandard{%
+ \StandardTableStrut
+ \cr}
+
+
+% *********************************************************************
+% ALTERNATE VRULES
+% *********************************************************************
+
+% A '\|' can appear in a rule-column in place of a '|', '"', or '&'.
+
+% If '\|' is immediately followed by a blank, a string of digits, or
+% (...) [... had better be a <dimen>], a \vrule is placed in the
+% rule column; the thickness of the \vrule follows TABLE's usual
+% conventions. Be sure to put a blank after a string of digits.
+
+% If '\|' is immediately followed by a '*', a user-specified default
+% "pseudo"-rule is placed in the rule column. This P.R. is specified
+% by the parameterless macro \PseudoVrule. For example,
+% to place a "double rule" into a rule column, you could make the definition
+% \def\PseudoVrule{\hfil\vrule \hskip1pt \vrule\hfil}
+
+% If none of the above cases applies, a non-space token follows '\|':
+% that token is placed in the rule-column. To put a '*' in a
+% rule-column, enter '\|{*}'. '\|\PseudoVrule' has the same effect
+% as '\|*'.
+
+% ALTERNATE VRULE
+\def\!ttAlternateVrule{%
+ \!tgGetValue{\!ttAVTestForCode}} % AV == Alternate Vrule
+
+% TEST FOR CODE (2)
+\def\!ttAVTestForCode{%
+ \ifnum \!tgCode=2 % (...) follows "\|"
+ \!thx\!ttInsertVrule % \InsertVrule ends with "&"
+ \else
+ \!thx\!ttAVTestForEmpty
+ \fi}
+
+% TEST FOR EMPTY (VALUE)
+\def\!ttAVTestForEmpty{%
+ \ifx \!tgValue\empty % non-digit after "\|"
+ \!thx\!ttAVTestForBlank
+ \else
+ \!thx\!ttInsertVrule % integer after "\|"
+ \fi}
+
+% TEST FOR BLANK
+\def\!ttAVTestForBlank{%
+ \ifx \!ttemp\!thSpaceToken % blank after "\|"
+ \!thx\!ttInsertVrule
+ \else
+ \!thx\!ttAVTestForStar
+ \fi}
+
+% TEST FOR STAR
+\def\!ttAVTestForStar{%
+ \ifx *\!ttemp % "*" after "\|"
+ \!thx\!ttInsertDefaultPR % PR == pseudo-rule
+ \else
+ \!thx\!ttGetPseudoVrule % "Anything else" after "\|"
+ \fi}
+
+% INSERT VRULE
+\def\!ttInsertVrule{%
+ \hfil
+ \vrule \!thWidth
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \LineThicknessFactor
+ \else
+ \!tgValue
+ \fi
+ \LineThicknessUnit
+ \else
+ \!tgValue
+ \fi
+ \hfil
+ &}
+
+% INSERT DEFAULT PSEUDO-RULE
+\def\!ttInsertDefaultPR*{%
+ \PseudoVrule % User-specified default pseudo-rule
+ &}
+
+% GET PSEUDO-RULE
+\def\!ttGetPseudoVrule#1{%
+ \toks0={#1}%
+ #1&}
+
+% DEFAULT PSEUDO-RULE
+\def\PseudoVrule{}
+
+
+% *********************************************************************
+% USE: Version of \multispan for rule-&-column tables
+% *********************************************************************
+
+% USE
+% \use <number> spans the next <number> data columns.
+\def\!ttuse#1{%
+ \ifnum #1>\@ne
+ \omit
+ \mscount=#1 % \mscount is in Plain
+ \advance\mscount by \m@ne
+ \advance\mscount by \mscount
+ \!thLoop
+ \ifnum\mscount>\@ne
+ \sp@n % from Plain (\span\omit \advance\mscount\m@ne)
+ \repeat
+ \span
+ \fi}
+
+\def\!ttUse#1[{%
+ \!ttuse{#1}%
+ \ReFormat[}
+
+
+% *********************************************************************
+% HRULES
+% *********************************************************************
+
+% FULL HORIZONTAL RULE: Draws a rule across the table,
+% using \noalign{\hrule}
+\def\!ttFullHrule{%
+ \noalign
+ \bgroup
+ \!tgGetValue{\!ttFullHruleA}}
+
+\def\!ttFullHruleA{%
+ \!ttGetHalfRuleThickness % Sets \dimen0 to half of specified thickness
+ \hrule \!thHeight \dimen0 \!thDepth \dimen0
+ \penalty0 % so can break an ``unboxed'' table after a horizontal rule.
+ \egroup} % ends the \noalign
+
+% SHORT HORIZONTAL RULE: Draws a rule across 1 (or more) columns,
+% using \leaders; this rule doesn't extend across the neighboring
+% tabskip glues to join up with adjacent rule columns. By contrast
+% the LONG HORIZONTAL RULE below does just that.
+\def\!ttShortHrule{%
+ \omit
+ \!tgGetValue{\!ttShortHruleA}}
+
+\def\!ttShortHruleA{%
+ \!ttGetHalfRuleThickness % Sets \dimen0 to half of specified thickness
+ \leaders \hrule \!thHeight \dimen0 \!thDepth \dimen0 \hfill
+ \null % prevents an \unskip from annihilating the \leaders
+ \ignorespaces}
+
+% LONG HORIZONTAL RULE: This rule requires special coding.
+% It must be preceded and followed by '&', instead of the usual
+% '|' or '"'. However, '\_' can follow '\use' in the usual manner.
+% And in fact, to insert long-rules in two or more contiguous columns,
+% '\use' MUST be used with an argument = total number of columns involved.
+\def\!ttLongHrule{%
+ \omit\span\omit\span \!ttShortHrule}
+
+% GET RULE THICKNESS
+\def\!ttGetHalfRuleThickness{%
+ \dimen0 =
+ \ifnum \!tgCode=1
+ \ifx \!tgValue\empty
+ \LineThicknessFactor
+ \else
+ \!tgValue % user-specified integer
+ \fi
+ \LineThicknessUnit
+ \else
+ \!tgValue % user-specified dimension
+ \fi
+ \divide\dimen0 2 }
+
+
+% *********************************************************************
+% STRETCHING AND SHRINKING A TABLE
+% *********************************************************************
+
+% SET TABLE TO WIDTH <dimen>
+\def\SetTableToWidth#1{%
+ \!taTableSpread={to #1}}
+
+% WIDEN TABLE BY <dimen>
+\def\WidenTableBy#1{%
+ \ifdim #1=0pt
+ \!taTableSpread={}%
+ \else
+ \!taTableSpread={spread #1}%
+ \fi}
+
+\def\Expand{%
+ \SetTableToWidth{\hsize}}%
+
+\def\LongLines{%
+ \LeftTabskip =0pt plus 1fill
+ \RightTabskip=\LeftTabskip
+ \Expand}
+
+
+% *********************************************************************
+% REPOSITIONING COMMANDS (\JUSTLEFT, etc.)
+% *********************************************************************
+
+\def\JustLeft{%
+ \omit \let\!ttRightGlue=\hfill}
+\def\JustCenter{%
+ \omit \hfill\null \let\!ttRightGlue=\hfill}
+\def\JustRight{%
+ \omit \hfill\null}
+
+
+% *********************************************************************
+% Restore meaning of \\, and reset category codes
+% *********************************************************************
+\let\\=\!tacr
+\catcode`\!=12
+\catcode`\@=12
+
+\endinput