path: root/luatexbase-regs.dtx

% \iffalse meta-comment
%
% Template : look for NAME DATE DESC VERSION !!!
% and 'derived files' !!!
%
% Written in 2009, 2010 by Manuel Pégourié-Gonnard and Élie Roux.
%     <mpg@elzevir.fr>
%     <elie.roux@telecom-bretagne.eu>
%
% This work is under the CC0 license.
%
% This work consists of the main source file luatexbase-regs.dtx
% and the derived files
%   luatexbase-regs.pdf luatexbase-regs.sty
%   test-regs-plain.tex test-regs-latex.tex
%
% Unpacking:
%    tex luatexbase-regs.dtx
% Documentation:
%    pdflatex luatexbase-regs.dtx
%
%    The class ltxdoc loads the configuration file ltxdoc.cfg
%    if available. Here you can specify further options, e.g.
%    use A4 as paper format:
%       \PassOptionsToClass{a4paper}{article}
%
%<*ignore>
\begingroup
  \def\x{LaTeX2e}%
\expandafter\endgroup
\ifcase 0\ifx\install y1\fi\expandafter
         \ifx\csname processbatchFile\endcsname\relax\else1\fi
         \ifx\fmtname\x\else 1\fi\relax
\else\csname fi\endcsname
%</ignore>
%<*install>
\input docstrip.tex

\keepsilent
\askforoverwritefalse

\preamble
This is a generated file.

Written in 2009, 2010 by Manuel P'egouri'e-Gonnard and 'Elie Roux.
    <mpg@elzevir.fr>
    <elie.roux@telecom-bretagne.eu>

This work is under the CC0 license.

This work consists of the main source file luatexbase-regs.dtx
and the derived files
    luatexbase-regs.pdf luatexbase-regs.sty
    test-regs-plain.tex test-regs-latex.tex

\endpreamble

\generate{%
  \usedir{tex/luatex/luatexbase}%
  \file{luatexbase-regs.sty}{\from{luatexbase-regs.dtx}{texpackage}}%
}

\generate{%
  \usedir{doc/luatex/luatexbase}%
  \file{test-regs-plain.tex}{\from{luatexbase-regs.dtx}{testplain}}%
  \file{test-regs-latex.tex}{\from{luatexbase-regs.dtx}{testlatex}}%
}

\obeyspaces
\Msg{************************************************************************}
\Msg{*}
\Msg{* To finish the installation you have to move the following}
\Msg{* files into a directory searched by TeX:}
\Msg{*}
\Msg{*     luatexbase-regs.sty luatexbase-regs-latex.tex ...}
\Msg{*}
\Msg{* Happy TeXing!}
\Msg{*}
\Msg{************************************************************************}

\endbatchfile
%</install>
%<*ignore>
\fi
%</ignore>
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{luatexbase-regs.drv}
  [DATE DESC]
\documentclass{ltxdoc}
\input lltxb-dtxstyle.tex
\EnableCrossrefs
\CodelineIndex
\begin{document}
  \DocInput{luatexbase-regs.dtx}%
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \GetFileInfo{luatexbase-regs.drv}
%
% \title{The \pk{luatexbase-regs} package}
% \date{DATE}
% \author{%
%  Manuel P\'egouri\'e-Gonnard \\ \email{mpg@elzevir.fr} \and
%   \'Elie Roux \\ \email{elie.roux@telecom-bretagne.eu}}
%
% \maketitle
%
% \begin{abstract}
% This package extends the register allocation scheme of \plaintex and
% \latex to take advantage of the increased number of registers available in
% \luatex.
% \end{abstract}
%
% \section{Documentation}
%
% Since the \plaintex and \latex formats are both frozen, they fail to take
% into account the extended resources provided by newer \tex-like engines.
% This package focuses on the allocation scheme for registers. \texe provides
% $6$ kinds or registers: count, dimen, skip, muskip, box and toks and has
% $256$ registers of each kind. \eTeX\ and most of its descendants add one
% kind of register (marks) and offers $2^{15} = 32768$ of each kind. \luatex
% provides $2^{16} = 65536$ registers of each kind. (It also provides new
% register-like resources, but this package addresses only the resources
% inherited from \eTeX.)
%
% More precisely, \pk{luatexbase-regs} loads the \pk{etex} package (or
% makes sure it is preloaded in the format) and then adapts it to the new
% limits of \luatex. Thus, all macros defined by the \pk{etex} package are
% made available (most notably, |\loccount|, |\globcountblk|,
% |\loccountblk| and alike). However, if a register of some kind has been
% locally allocated before this package is loaded, then the number of
% allocatable registers of this kind will not be extended to $65536$. To avoid
% this, load \pk{luatexbase-regs} earlier.
%
% The \plaintex and \latex formats define a new kind of resource:
% \emph{inserts} which are merely a family (count, dimen, skip, box) of
% registers with the same number. Inserts allocation begins at $255$ and goes
% toward $0$. Thus we can make room for more inserts by making allocation of
% count-, dimen-, skip- and box-registers start from $256$. With real \etex,
% it may be a bad idea since registers with index greater than $256$ have
% degraded performance due to implementation details, but with \luatex the
% performance is uniform, so we just do it.
%
% \clearpage
%
%    \section{Implementation}
%
%    \begin{macrocode}
%<*texpackage>
%    \end{macrocode}
%
%    \subsection{Preliminaries}
%
%    Reload protection, especially for \plaintex.
%
%    \begin{macrocode}
                \csname lltxb@regs@loaded\endcsname
\expandafter\let\csname lltxb@regs@loaded\endcsname\endinput
%    \end{macrocode}
%
%    Package declaration.
%
%    \begin{macrocode}
\begingroup
  \expandafter\ifx\csname ProvidesPackage\endcsname\relax
    \def\x#1[#2]{\immediate\write16{Package: #1 #2}}
  \else
    \let\x\ProvidesPackage
  \fi
\expandafter\endgroup
\x{luatexbase-regs}[2010/01/14  Registers allocation for LuaTeX  (mpg)]
%    \end{macrocode}
%
%    Make sure \luatex is used.
%
%    \begin{macrocode}
\begingroup\expandafter\expandafter\expandafter\endgroup
\expandafter\ifx\csname RequirePackage\endcsname\relax
  \input ifluatex.sty
\else
  \RequirePackage{ifluatex}
\fi
\ifluatex\else
  \begingroup
    \expandafter\ifx\csname PackageWarningNoLine\endcsname\relax
      \def\x#1#2{\begingroup\newlinechar10
        \immediate\write16{Package #1 warning: #2}\endgroup}
    \else
      \let\x\PackageWarningNoLine
    \fi
  \expandafter\endgroup
  \x{luatexbase-regs}{LuaTeX is required for this package.^^J
    Aborting package loading.}
  \expandafter\endinput
\fi
%    \end{macrocode}
%
%    Make sure the catcode of @ is correct, especially for \plaintex.
%
%    \begin{macrocode}
\expandafter\edef\csname lltxb@AtEnd\endcsname{%
  \catcode64 \the\catcode64\relax}
\catcode64 11
%    \end{macrocode}
%
%    \subsection{Main content}
%
%    If running \latex, load \file{etex.sty}. If not, either
%    \file{etex.src} was loaded at format generation time, or we cannot do
%    anything.
%
%    \begin{macrocode}
\begingroup\expandafter\expandafter\expandafter\endgroup
\expandafter\ifx\csname RequirePackage\endcsname\relax \else
  \RequirePackage{etex}[1998/03/26]
\fi
%    \end{macrocode}
%
%    To the best of my (mpg) knowledge, all Plain-based formats built with
%    \etex-enabled engines in \texlive load \file{etex.src}. However,
%    let's be careful and check that \file{etex.sty} or \file{etex.src} is
%    loaded.
%
%    \begin{macrocode}
\begingroup\expandafter\expandafter\expandafter\endgroup
\expandafter\ifx\csname et@xins\endcsname\relax
  \begingroup
    \expandafter\ifx\csname PackageWarningNoLine\endcsname\relax
      \def\x#1#2{\begingroup\newlinechar10
        \immediate\write16{Package #1 warning: #2}\endgroup}
    \else
      \let\x\PackageWarningNoLine
    \fi
  \expandafter\endgroup
  \x{luatexbase-regs}{etex macros not loaded!^^J
    Registers allocation scheme will not be extended.}
\else
%    \end{macrocode}
%
%    First, increase the upper bound for all kinds of registers. Copy code to
%    avoid defining a macro.
%
%    \begin{macrocode}
  \ifnum\count270=32768 \count270=65536 \fi
  \ifnum\count271=32768 \count271=65536 \fi
  \ifnum\count272=32768 \count272=65536 \fi
  \ifnum\count273=32768 \count272=65536 \fi
  \ifnum\count273=32768 \count273=65536 \fi
  \ifnum\count274=32768 \count274=65536 \fi
  \ifnum\count275=32768 \count275=65536 \fi
  \ifnum\count276=32768 \count276=65536 \fi
%    \end{macrocode}
%
%    |\box| registers and |\mark|s were previously defined
%    using |\mathchardef| since it had the biggest range under \etex
%    (15-bit number).  However, this is not enough for \luatex's extended
%    registers. Fortunately, |\chardef|'s range is extended, and now large
%    enough, so use it everywhere instead of |\mathchardef|. Do this
%    inside a group and use |\toks0| to store the list of actions.
%
%    \begin{macrocode}
  \begingroup \toks0{}
    \def\@namedef #1{\expandafter                  \def\csname#1\endcsname}
    \def\@outerdef#1{\expandafter\outer\expandafter\def\csname#1\endcsname}
%    \end{macrocode}
%
%    Notice that the auxiliary macros will automatically expand to the desired
%    level when necessary, see below.
%
%    First, here are the definitions from \file{etex.src}, in a form adapted
%    to our needs.
%
%    \begin{macrocode}
    \def\def@globbox   #1#2{\@outerdef{#1}{\et@xglob 4 \box    #2}}
    \def\def@locbox    #1#2{\@namedef {#1}{\et@xloc  4 \box    #2}}
    \def\def@globmarks #1#2{\@outerdef{#1}{\et@xglob 6 \marks  #2}}
    \def\def@locmarks  #1#2{\@namedef {#1}{\et@xloc  6 \marks  #2}}
    \def\def@et@xgblk#1#2{\@namedef{#1}##1##2##3##4%
      {\et@xchkblk ##1##2{##4}%
        {\allocationnumber=\count 26##1
          \global \advance \count 26##1 by ##4%
          \global #2##3=\allocationnumber
          \wlog {\string ##3=\string ##2blk{\number ##4}
            at \the \allocationnumber}%
          }%
        }}
    \def\def@et@xlblk#1#2{\@namedef{#1}##1##2##3##4%
      {\et@xchkblk ##1##2{##4}%
        {\advance \count 27##1 by -##4%
          \allocationnumber=\count 27##1
          #2##3=\allocationnumber
          \wlog {\string ##3=\string ##2blk{\number ##4}
            at \the \allocationnumber \space (local)%
            }%
          }%
        }}
%    \end{macrocode}
%
%    Then, the definitions from \file{etex.sty} since they are subtly
%    different (|\outer| status, but also optional spaces or |=|
%    signs).
%
%    \begin{macrocode}
    \def\alt@globbox   #1#2{\@namedef{#1}{\et@xglob 4\box    #2}}
    \def\alt@locbox    #1#2{\@namedef{#1}{\et@xloc  4\box    #2}}
    \def\alt@globmarks #1#2{\@namedef{#1}{\et@xglob 6\marks  #2}}
    \def\alt@locmarks  #1#2{\@namedef{#1}{\et@xloc  6\marks  #2}}
    \def\alt@et@xgblk#1#2{\@namedef{#1}##1##2##3##4%
      {\et@xchkblk##1##2{##4}%
        {\allocationnumber\count26##1%
          \global\advance\count26##1by##4%
          \global#2##3\allocationnumber
          \wlog{\string##3=\string##2blk{\number##4} at
            \the\allocationnumber}%
          }%
        }}
    \def\alt@et@xlblk#1#2{\@namedef{#1}##1##2##3##4%
      {\et@xchkblk##1##2{##4}%
        {\advance\count27##1-##4%
          \allocationnumber\count27##1%
          #2##3\allocationnumber
          \et@xwlog{\string##3=\string##2blk{\number##4} at
            \the\allocationnumber\space(local)}%
          }%
        }}
%    \end{macrocode}
%
%    Now, a macro checking the definitions, and making the appropriate
%    re-definition.
%
%    \begin{macrocode}
    \def\check@def#1{%
      \csname def@#1\endcsname{test@#1}\mathchardef
      \expandafter\ifx\csname test@#1\expandafter\endcsname
                      \csname #1\endcsname
        \expandafter\let\csname #1\endcsname\relax
        \toks0\expandafter{\the\toks0\csname def@#1\endcsname{#1}\chardef}
      \else
        \csname alt@#1\endcsname{test@#1}\mathchardef
        \expandafter\ifx\csname test@#1\expandafter\endcsname
                        \csname #1\endcsname
          \toks0\expandafter{\the\toks0\csname alt@#1\endcsname{#1}\chardef}
        \else
          \expandafter\show\csname BAD#1\endcsname
        \fi
      \fi}
%    \end{macrocode}
%
%    Now, actually do it.
%
%    \begin{macrocode}
    \check@def{globbox}
    \check@def{locbox}
    \check@def{globmarks}
    \check@def{locmarks}
    \check@def{et@xgblk}
    \check@def{et@xlblk}
  \expandafter \endgroup
  \the\toks0
%    \end{macrocode}
%
%    Finally, make allocation of |\count|, |\dimen|, |skip| and
%    |\box| start with numbers $>255$, in order to free the lower numbers
%    for insertions. Be careful with |\new...| macros which are
%    |\outer| in Plain, since we're in the middle of an |\if| test.
%
%    \begin{macrocode}
  \expandafter\let\csname newcount\endcsname\globcount
  \expandafter\let\csname newdimen\endcsname\globdimen
  \expandafter\let\csname newskip\endcsname\globskip
  \expandafter\let\csname newbox\endcsname\globbox
\fi
%    \end{macrocode}
%
%    That's all folks!
%
%    \begin{macrocode}
\lltxb@AtEnd
%</texpackage>
%    \end{macrocode}
%
%    \section{Test files}
%
%    Here we test only the two main formats: \plaintex (with \file{etex.src}
%    loaded) and \latex, both with the \luatex engine. Those correspond to
%    the \cmdname{luatex} and \cmdname{lualatex} commands in \texlive.
%
%    We want to make sure we can globally and locally allocate $30000$
%    registers of each kind, and still globally allocate $100$ |\insert|s.
%    Next we globally allocate a bloc of $3000$ registers of each kind, and
%    locally a block of $1000$. (Those numbers are not optimal, but they
%    should be enough for testing purposes.)
%
%    \begin{macrocode}
%<testplain>\input luatexbase-regs.sty
%<testlatex>\RequirePackage{luatexbase-regs}
%<*testplain,testlatex>
\def\checkregister#1{%
  \edef\newregister{\expandafter\noexpand\csname new#1\endcsname}%
  \edef\locregister{\expandafter\noexpand\csname loc#1\endcsname}%
  \count0 1
  \loop
    \newregister\dummy
    \locregister\dummy
  \ifnum\count0<30000
    \advance\count0 1
  \repeat}
\checkregister{count}
\checkregister{dimen}
\checkregister{skip}
\checkregister{muskip}
\checkregister{box}
\checkregister{toks}
\checkregister{marks}

\count0 1
\loop \ifnum\count0<100
  \csname newinsert\endcsname\dummy
  \advance\count0 1
\repeat

\globcountblk \dummy{3000}
\globdimenblk \dummy{3000}
\globskipblk  \dummy{3000}
\globmuskipblk\dummy{3000}
\globboxblk   \dummy{3000}
\globtoksblk  \dummy{3000}
\globmarksblk \dummy{3000}

\loccountblk  \dummy{1000}
\locdimenblk  \dummy{1000}
\locskipblk   \dummy{1000}
\locmuskipblk \dummy{1000}
\locboxblk    \dummy{1000}
\loctoksblk   \dummy{1000}
\locmarksblk  \dummy{1000}
%</testplain,testlatex>
%<testplain>\bye
%<testlatex>\stop
%    \end{macrocode}
%
%
% \Finale
\endinput