[doc] kill dtx

The file ``luaotfload.dtx`` which made the documentation a huge PITA to
extend, has finally been converted to ordinary Latex format. In the
course of this conversion the style directives have been moved to file
(``luaotfload-latex.tex``) so as to separate them from the content
(``luaotfload-main.tex``).

1 files changed, 0 insertions, 1994 deletions

diff --git a/doc/luaotfload.dtx b/doc/luaotfload.dtx
deleted file mode 100644
index e0311a4..0000000
--- a/doc/luaotfload.dtx
+++ /dev/null
@@ -1,1994 +0,0 @@
-% \iffalse meta-comment
-%
-% Copyright (C) 2009-2014
-%      by  Elie Roux      <elie.roux@telecom-bretagne.eu>
-%      and Khaled Hosny   <khaledhosny@eglug.org>
-%      and Philipp Gesang <philipp.gesang@alumni.uni-heidelberg.de>
-%
-%      Home:      https://github.com/lualatex/luaotfload
-%      Support:   <lualatex-dev@tug.org>.
-%
-% This work is under the GPL v2.0 license.
-%
-% This work consists of the main source file luaotfload.dtx
-% and the derived files
-%    luaotfload.sty
-%
-% Unpacking:
-%    tex luaotfload.dtx
-%
-% Documentation:
-%    lualatex luaotfload.dtx
-%
-%    The class ltxdoc loads the configuration file ltxdoc.cfg
-%    if available. Here you can specify further options, e.g.
-%    use A4 as paper format:
-%       \PassOptionsToClass{a4paper}{article}
-%
-%
-%
-%<*ignore>
-\begingroup
-  \def\x{LaTeX2e}%
-\expandafter\endgroup
-\ifcase 0\ifx\install y1\fi\expandafter
-         \ifx\csname processbatchFile\endcsname\relax\else1\fi
-         \ifx\fmtname\x\else 1\fi\relax
-\else\csname fi\endcsname
-%</ignore>
-%<*install>
-\input docstrip.tex
-\Msg{************************************************************************}
-\Msg{* Installation}
-\Msg{* Package: luaotfload v2.5 OpenType layout system}
-\Msg{************************************************************************}
-
-\keepsilent
-\askforoverwritefalse
-
-\let\MetaPrefix\relax
-
-\preamble
-This is a generated file.
-
-Copyright (C) 2009-2014
-     by  Elie Roux      <elie.roux@telecom-bretagne.eu>
-     and Khaled Hosny   <khaledhosny@eglug.org>
-     and Philipp Gesang <philipp.gesang@alumni.uni-heidelberg.de>
-
-     Home:      https://github.com/lualatex/luaotfload
-     Support:   <lualatex-dev@tug.org>.
-
-This work is under the GPL v2.0 license.
-
-This work consists of the main source file luaotfload.dtx
-and the derived files
-    luaotfload.sty
-
-\endpreamble
-
-\obeyspaces
-\Msg{************************************************************************}
-\Msg{*}
-\Msg{* To finish the installation you have to move the following}
-\Msg{* files into a directory searched by TeX:}
-\Msg{*}
-\Msg{*     luaotfload.sty}
-\Msg{*}
-\Msg{* Happy TeXing!}
-\Msg{*}
-\Msg{************************************************************************}
-
-\endbatchfile
-%</install>
-%<*ignore>
-\fi
-%</ignore>
-%<*driver>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesFile{luaotfload.drv}%
-[2014/**/** v2.5 OpenType layout system]%
-\documentclass{ltxdoc}
-\usepackage{metalogo,multicol,mdwlist,fancyvrb,xspace}
-\usepackage[x11names]{xcolor}
-%
-\def\primarycolor{DodgerBlue4}  %%-> rgb  16  78 139 | #104e8b
-\def\secondarycolor{Goldenrod4} %%-> rgb 139 105 200 | #8b6914
-%
-\usepackage[
-    bookmarks=true,
-   colorlinks=true,
-    linkcolor=\primarycolor,
-     urlcolor=\secondarycolor,
-    citecolor=\primarycolor,
-     pdftitle={The luaotfload package},
-   pdfsubject={OpenType layout system for Plain TeX and LaTeX},
-    pdfauthor={Elie Roux & Khaled Hosny & Philipp Gesang},
-  pdfkeywords={luatex, lualatex, unicode, opentype}
-]{hyperref}
-\usepackage{fontspec}
-\usepackage{unicode-math}
-\setmainfont[
-% Numbers     = OldStyle, %% buggy with font cache
-  Ligatures   = TeX,
-  BoldFont    = {Linux Libertine O Bold},
-  ItalicFont  = {Linux Libertine O Italic},
-  SlantedFont = {Linux Libertine O Italic},
-]{Linux Libertine O}
-\setmonofont[Ligatures=TeX,Scale=MatchLowercase]{Liberation Mono}
-%setsansfont[Ligatures=TeX]{Linux Biolinum O}
-\setsansfont[Ligatures=TeX,Scale=MatchLowercase]{Iwona Medium}
-%setmathfont{XITS Math}
-
-\usepackage{hologo}
-
-\newcommand\TEX      {\TeX\xspace}
-\newcommand\LUA      {Lua\xspace}
-\newcommand\PDFTEX   {pdf\TeX\xspace}
-\newcommand\LUATEX   {Lua\TeX\xspace}
-\newcommand\XETEX    {\XeTeX\xspace}
-\newcommand\LATEX    {\LaTeX\xspace}
-\newcommand\LUALATEX {Lua\LaTeX\xspace}
-\newcommand\CONTEXT  {Con\TeX t\xspace}
-\newcommand\OpenType {\identifier{Open\kern-.25ex Type}\xspace}
-
-\def\definehighlight[#1][#2]%
- {\ifcsname #1\endcsname\else
-    \expandafter\def\csname #1\endcsname%
-      {\bgroup#2\csname #1_indeed\endcsname}
-    \expandafter\def\csname #1_indeed\endcsname##1%
-      {##1\egroup}%
-  \fi}
-
-\def\restoreunderscore{\catcode`\_=12\relax}
-
-\definehighlight    [fileent][\ttfamily\restoreunderscore]         %% files, dirs
-\definehighlight   [texmacro][\sffamily\itshape\textbackslash]     %% cs
-\definehighlight[luafunction][\sffamily\itshape\restoreunderscore] %% lua identifiers
-\definehighlight [identifier][\sffamily]                           %% names
-\definehighlight     [abbrev][\rmfamily\scshape]                   %% acronyms
-\definehighlight   [emphasis][\rmfamily\slshape]                   %% level 1 emph
-
-\newcommand*\email[1]{\href{mailto:#1}{#1}}
-
-\renewcommand\partname{Part}%% gets rid of the stupid “file” heading
-
-\usepackage{syntax}%% bnf for font request syntax
-
-\usepackage{titlesec}
-
-\def\movecountertomargin#1{\llap{\rmfamily\upshape#1\hskip2em}}
-\def\zeropoint{0pt}
-\titleformat \part
-             {\normalsize\rmfamily\bfseries}
-             {\movecountertomargin\thepart} \zeropoint {}
-\titleformat \section
-             {\normalsize\rmfamily\scshape}
-             {\movecountertomargin\thesection} \zeropoint {}
-\titleformat \subsection
-             {\small\rmfamily\itshape}
-             {\movecountertomargin\thesubsection} \zeropoint {}
-\titleformat \subsubsection
-             {\normalsize\rmfamily\upshape}
-             {\movecountertomargin\thesubsubsection} \zeropoint {}
-
-\usepackage{tocloft}
-\renewcommand \cftpartfont   {\rmfamily\upshape}
-\renewcommand \cftsecfont    {\rmfamily\upshape}
-\renewcommand \cftsubsecfont {\rmfamily\upshape}
-\setlength \cftbeforepartskip {1ex}
-\setlength \cftbeforesecskip  {1ex}
-
-\VerbatimFootnotes
-\begin{document}
-  \DocInput{luaotfload.dtx}%
-\end{document}
-%</driver>
-% \fi
-%
-% \CheckSum{0}
-%
-% \CharacterTable
-%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%   Digits        \0\1\2\3\4\5\6\7\8\9
-%   Exclamation   \!     Double quote  \"     Hash (number) \#
-%   Dollar        \$     Percent       \%     Ampersand     \&
-%   Acute accent  \'     Left paren    \(     Right paren   \)
-%   Asterisk      \*     Plus          \+     Comma         \,
-%   Minus         \-     Point         \.     Solidus       \/
-%   Colon         \:     Semicolon     \;     Less than     \<
-%   Equals        \=     Greater than  \>     Question mark \?
-%   Commercial at \@     Left bracket  \[     Backslash     \\
-%   Right bracket \]     Circumflex    \^     Underscore    \_
-%   Grave accent  \`     Left brace    \{     Vertical bar  \|
-%   Right brace   \}     Tilde         \~}
-%
-% \GetFileInfo{luaotfload.drv}
-%
-% \title{The \identifier{luaotfload} package}
-% \date{2014/**/** v2.5}
-% \author{Elie Roux · Khaled Hosny · Philipp Gesang\\
-%         Home:      \url{https://github.com/lualatex/luaotfload}\\
-%         Support:   \email{lualatex-dev@tug.org}}
-%
-% \maketitle
-%
-% \begin{abstract}
-% This package is an adaptation of the \CONTEXT font loading system.
-% It allows for loading \OpenType fonts with an extended syntax and adds
-% support for a variety of font features.
-% \end{abstract}
-%
-% \tableofcontents
-%
-% \part{Package Description}
-%
-% \section{Introduction}
-%
-% Font management and installation has always been painful with \TEX.  A lot of
-% files are needed for one font (\abbrev{tfm}, \abbrev{pfb}, \abbrev{map},
-% \abbrev{fd}, \abbrev{vf}), and due to the 8-Bit encoding each font is limited
-% to 256 characters.
-% But the font world has evolved since the original
-% \TEX, and new typographic systems have appeared, most notably the so
-% called \emphasis{smart font} technologies like \OpenType
-% fonts (\abbrev{otf}).
-% These fonts can contain many more characters than \TEX fonts, as well as additional
-% functionality like ligatures, old-style numbers, small capitals,
-% etc., and support more complex writing systems like Arabic and
-% Indic\footnote{%
-%   Unfortunately, \identifier{luaotfload} doesn‘t support many Indic
-%   scripts right now.
-%   Assistance in implementing the prerequisites is greatly
-%   appreciated.
-% }
-% scripts.
-% \OpenType fonts are widely deployed and available for all
-% modern operating systems.
-% As of 2013 they have become the de facto standard for advanced text
-% layout.
-% However, until recently the only way to use them directly in the \TEX
-% world was with the \XETEX engine.
-%
-% Unlike \XETEX, \LUATEX has no built-in support for
-% \OpenType or technologies other than the original \TEX fonts.
-% Instead, it provides hooks for executing \LUA code during the \TEX run
-% that allow implementing extensions for loading fonts and manipulating
-% how input text is processed without modifying the underlying engine.
-% This is where \identifier{luaotfload} comes into play:
-% Based on code from \CONTEXT, it extends \LUATEX with functionality necessary
-% for handling \OpenType fonts.
-% Additionally, it provides means for accessing fonts known to the operating
-% system conveniently by indexing the metadata.
-%
-%
-% \section{Thanks}
-%
-% \identifier{Luaotfload} is part of \LUALATEX, the community-driven
-% project to provide a foundation for using the \LATEX format with the
-% full capabilites of the \LUATEX engine.
-% As such, the distinction between end users, contributors, and project
-% maintainers is intentionally kept less strict, lest we unduly
-% personalize the common effort.
-%
-% Nevertheless, the current maintainers would like to express their
-% gratitude to Khaled Hosny, Akira Kakuto, Hironori Kitagawa and Dohyun
-% Kim.
-% Their contributions -- be it patches, advice, or systematic
-% testing -- made the switch from version 1.x to 2.2 possible.
-% Also, Hans Hagen, the author of the font loader, made porting the
-% code to \LATEX a breeze due to the extra effort he invested into
-% isolating it from the rest of \CONTEXT, not to mention his assistance
-% in the task and willingness to respond to our suggestions.
-%
-%
-% \section{Loading Fonts}
-%
-% \identifier{luaotfload} supports an extended font request syntax:
-%
-% \begin{quote}
-%       |\font\foo={|%
-%       \meta{prefix}|:|%
-%       \meta{font name}|:|%
-%       \meta{font features}|}|%
-%       \meta{\TEX font features}
-% \end{quote}
-%
-% \noindent
-% The curly brackets are optional and escape the spaces in the enclosed
-% font name.
-% Alternatively, double quotes serve the same purpose.
-% A selection of individual parts of the syntax are discussed below;
-% for a more formal description see figure \ref{font-syntax}.
-%
-% \begin{figure}[b]
-%   \setlength\grammarparsep{12pt plus 2pt minus 2pt}
-%   \setlength\grammarindent{5cm}
-%   \begingroup
-%     \small
-%     \begin{grammar}
-%       <definition>      ::= `\\font', {\sc csname}, `=', <font request>, [ <size> ] ;
-%
-%       <size>            ::= `at', {\sc dimension} ;
-%
-%       <font request>    ::= `"', <unquoted font request> `"'
-%       \alt                  `{', <unquoted font request> `}'
-%       \alt                  <unquoted font request> ;
-%
-%       <unquoted font request> ::= <specification>, [`:', <feature list> ]
-%       \alt                        `[', <path lookup> `]', [ [`:'], <feature list> ] ;
-%
-%       <specification>    ::= <prefixed spec>, [ <subfont no> ], \{ <modifier> \}
-%       \alt                   <anon lookup>, \{ <modifier> \} ;
-%
-%       <prefixed spec>    ::= `file:', <file lookup>
-%       \alt                   `name:', <name lookup> ;
-%
-%       <file lookup>      ::= \{ <name character> \} ;
-%
-%       <name lookup>      ::= \{ <name character> \} ;
-%
-%       <anon lookup>      ::= {\sc tfmname} | <name lookup> ;
-%
-%       <path lookup>      ::= \{ {\sc all_characters} - `]' \} ;
-%
-%       <modifier>         ::= `/', (`I' | `B' | `BI' | `IB' | `S=', \{ {\sc digit} \} ) ;
-%
-%       <subfont no>       ::= `(', \{ {\sc digit} \}, `)' ;
-%
-%       <feature list>     ::= <feature expr>, \{ `;', <feature expr> \} ;
-%
-%       <feature expr>     ::= {\sc feature_id}, `=', {\sc feature_value}
-%       \alt                   <feature switch>, {\sc feature_id} ;
-%
-%       <feature switch>   ::= `+' | `-' ;
-%
-%       <name character>   ::= {\sc all_characters} - ( `(' | `/' | `:' ) ;
-%     \end{grammar}
-%   \endgroup
-%   \caption{Font request syntax.
-%            Braces or double quotes around the
-%            \emphasis{specification} rule will
-%            preserve whitespace in file names.
-%            In addition to the font style modifiers
-%            (\emphasis{slash-notation}) given above, there
-%            are others that are recognized but will be silently
-%            ignored: {\ttfamily aat},
-%                     {\ttfamily icu}, and
-%                     {\ttfamily gr}.
-%            The special terminals are:
-%            {\sc feature\textunderscore id} for a valid font
-%               feature name and
-%            {\sc feature\textunderscore value} for the corresponding
-%               value.
-%            {\sc tfmname} is the name of a \abbrev{tfm} file.
-%            {\sc digit}  again refers to bytes 48--57, and
-%            {\sc all\textunderscore characters} to all byte values.
-%            {\sc csname} and {\sc dimension} are the \TEX concepts.}
-%   \label{font-syntax}
-% \end{figure}
-%
-% \subsection{Prefix -- the \identifier{luaotfload}{ }Way}
-%
-% In \identifier{luaotfload}, the canonical syntax for font requests
-% requires a \emphasis{prefix}:
-% \begin{quote}
-%   |\font\fontname=|\meta{prefix}|:|\meta{fontname}\dots
-% \end{quote}
-% where \meta{prefix} is either \verb|file:| or \verb|name:|.\footnote{%
-%   The development version also knows two further prefixes,
-%   \verb|kpse:| and \verb|my:|.
-%   A \verb|kpse| lookup is restricted to files that can be found by
-%   \identifier{kpathsea} and
-%   will not attempt to locate system fonts.
-%   This behavior can be of value when an extra degree of encapsulation is
-%   needed, for instance when supplying a customized tex distribution.
-%
-%   The \verb|my| lookup takes this a step further: it lets you define
-%   a custom resolver function and hook it into the \luafunction{resolve_font}
-%   callback.
-%   This ensures full control over how a file is located.
-%   For a working example see the
-%   \href{https://bitbucket.org/phg/lua-la-tex-tests/src/5f6a535d/pln-lookup-callback-1.tex}
-%        {test repo}.
-% }
-% It determines whether the font loader should interpret the request as
-% a \emphasis{file name} or
-%   \emphasis{font name}, respectively,
-% which again influences how it will attempt to locate the font.
-% Examples for font names are
-%             “Latin Modern Italic”,
-%             “GFS Bodoni Rg”, and
-%             “PT Serif Caption”
-% -- they are the human readable identifiers
-% usually listed in drop-down menus and the like.\footnote{%
-%   Font names may appear like a great choice at first because they
-%   offer seemingly more intuitive identifiers in comparison to arguably
-%   cryptic file names:
-%   “PT Sans Bold” is a lot more descriptive than \fileent{PTS75F.ttf}.
-%   On the other hand, font names are quite arbitrary and there is no
-%   universal method to determine their meaning.
-%   While \identifier{luaotfload} provides fairly sophisticated heuristic
-%   to figure out a matching font style, weight, and optical size, it
-%   cannot be relied upon to work satisfactorily for all font files.
-%   For an in-depth analysis of the situation and how broken font names
-%   are, please refer to
-%   \href{http://www.ntg.nl/pipermail/ntg-context/2013/073889.html}
-%        {this post}
-%   by Hans Hagen, the author of the font loader.
-%   If in doubt, use filenames.
-%   \fileent{luaotfload-tool} can perform the matching for you with the
-%   option \verb|--find=<name>|, and you can use the file name it returns
-%   in your font definition.
-% }
-% In order for fonts installed both in system locations and in your
-% \fileent{texmf} to be accessible by font name, \identifier{luaotfload} must
-% first collect the metadata included in the files.
-% Please refer to section~\ref{sec:fontdb} below for instructions on how to
-% create the database.
-%
-% File names are whatever your file system allows them to be, except
-% that that they may not contain the characters
-%                             \verb|(|,
-%                             \verb|:|, and
-%                             \verb|/|.
-% As is obvious from the last exception, the \verb|file:| lookup will
-% not process paths to the font location -- only those
-% files found when generating the database are addressable this way.
-% Continue below in the \XETEX section if you need to load your fonts
-% by path.
-% The file names corresponding to the example font names above are
-%           \fileent{lmroman12-italic.otf},
-%           \fileent{GFSBodoni.otf}, and
-%           \fileent{PTZ56F.ttf}.
-%
-% \subsection{Compatibility Layer}
-%
-% In addition to the regular prefixed requests, \identifier{luaotfload}
-% accepts loading fonts the \XETEX way.
-% There are again two modes: bracketed and unbracketed.
-% A bracketed request looks as follows.
-%
-% \begin{quote}
-%   |\font\fontname=[|\meta{path to file}|]|
-% \end{quote}
-%
-% \noindent
-% Inside the square brackets, every character except for a closing
-% bracket is permitted, allowing for specifying paths to a font file.
-% Naturally, path-less file names are equally valid and processed the
-% same way as an ordinary \verb|file:| lookup.
-%
-% \begin{quote}
-%   |\font\fontname=|\meta{font name} \dots
-% \end{quote}
-%
-% Unbracketed (or, for lack of a better word: \emphasis{anonymous})
-% font requests resemble the conventional \TEX syntax.
-% However, they have a broader spectrum of possible interpretations:
-% before anything else, \identifier{luaotfload} attempts to load a
-% traditional \TEX Font Metric (\abbrev{tfm} or \abbrev{ofm}).
-% If this fails, it performs a \verb|name:| lookup, which itself will
-% fall back to a \verb|file:| lookup if no database entry matches
-% \meta{font name}.
-%
-% Furthermore, \identifier{luaotfload} supports the slashed (shorthand)
-% font style notation from \XETEX.
-%
-% \begin{quote}
-%   |\font\fontname=|\meta{font name}|/|\meta{modifier}\dots
-% \end{quote}
-%
-% \noindent
-% Currently, four style modifiers are supported:
-%   \verb|I| for italic shape,
-%   \verb|B| for bold   weight,
-%   \verb|BI| or \verb|IB| for the combination of both.
-% Other “slashed” modifiers are too specific to the \XETEX engine and
-% have no meaning in \LUATEX.
-%
-% \subsection{Examples}
-%
-% \subsubsection{Loading by File Name}
-%
-% For example, conventional \abbrev{type1} font can be loaded with a \verb|file:|
-% request like so:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\lmromanten={file:ec-lmr10} at 10pt
-%   \end{verbatim}
-% \end{quote}
-%
-% The \OpenType version of Janusz Nowacki’s font \emphasis{Antykwa
-% Półtawskiego}\footnote{%
-%   \url{http://jmn.pl/antykwa-poltawskiego/}, also available in
-%   in \TEX Live.
-% }
-% in its condensed variant can be loaded as follows:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\apcregular=file:antpoltltcond-regular.otf at 42pt
-%   \end{verbatim}
-% \end{quote}
-%
-% The next example shows how to load the \emphasis{Porson} font digitized by
-% the Greek Font Society using \XETEX-style syntax and an absolute path from a
-% non-standard directory:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\gfsporson="[/tmp/GFSPorson.otf]" at 12pt
-%   \end{verbatim}
-% \end{quote}
-%
-% \subsubsection{Loading by Font Name}
-%
-% The \verb|name:| lookup does not depend on cryptic filenames:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\pagellaregular={name:TeX Gyre Pagella} at 9pt
-%   \end{verbatim}
-% \end{quote}
-%
-% A bit more specific but essentially the same lookup would be:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\pagellaregular={name:TeX Gyre Pagella Regular} at 9pt
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent
-% Which fits nicely with the whole set:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\pagellaregular   ={name:TeX Gyre Pagella Regular}    at 9pt
-%   \font\pagellaitalic    ={name:TeX Gyre Pagella Italic}     at 9pt
-%   \font\pagellabold      ={name:TeX Gyre Pagella Bold}       at 9pt
-%   \font\pagellabolditalic={name:TeX Gyre Pagella Bolditalic} at 9pt
-%
-%   {\pagellaregular     foo bar baz\endgraf}
-%   {\pagellaitalic      foo bar baz\endgraf}
-%   {\pagellabold        foo bar baz\endgraf}
-%   {\pagellabolditalic  foo bar baz\endgraf}
-%
-%   ...
-%   \end{verbatim}
-% \end{quote}
-%
-% \subsubsection{Modifiers}
-%
-% If the entire \emphasis{Iwona} family\footnote{%
-%   \url{http://jmn.pl/kurier-i-iwona/},
-%   also in \TEX Live.
-% }
-% is installed in some location accessible by \identifier{luaotfload},
-% the regular shape can be loaded as follows:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\iwona=Iwona at 20pt
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent
-% To load the most common of the other styles, the slash notation can
-% be employed as shorthand:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\iwonaitalic    =Iwona/I    at 20pt
-%   \font\iwonabold      =Iwona/B    at 20pt
-%   \font\iwonabolditalic=Iwona/BI   at 20pt
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent
-% which is equivalent to these full names:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\iwonaitalic    ="Iwona Italic"       at 20pt
-%   \font\iwonabold      ="Iwona Bold"         at 20pt
-%   \font\iwonabolditalic="Iwona BoldItalic"   at 20pt
-%   \end{verbatim}
-% \end{quote}
-%
-% \section{Font features}
-%
-% \emphasis{Font features} are the second to last component in the
-% general scheme for font requests:
-%
-% \begin{quote}
-%       |\font\foo={|%
-%       \meta{prefix}|:|%
-%       \meta{font name}|:|%
-%       \meta{font features}|}|%
-%       \meta{\TEX font features}
-% \end{quote}
-%
-% \noindent
-% If style modifiers are present (\XETEX style), they must precede
-% \meta{font features}.
-%
-% The element \meta{font features} is a semicolon-separated list of feature
-% tags\footnote{%
-%   Cf. \url{http://www.microsoft.com/typography/otspec/featurelist.htm}.
-% }
-% and font options.
-% Prepending a font feature with a |+| (plus sign) enables it, whereas
-% a |-| (minus) disables it. For instance, the request
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\test=LatinModernRoman:+clig;-kern
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent activates contextual ligatures (|clig|) and disables
-% kerning (|kern|).
-% Alternatively the options |true| or |false| can be passed to
-% the feature in a key/value expression.
-% The following request has the same meaning as the last one:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\test=LatinModernRoman:clig=true;kern=false
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent
-% Furthermore, this second syntax is required should a font feature
-% accept other options besides a true/false switch.
-% For example, \emphasis{stylistic alternates} (|salt|) are variants of given
-% glyphs.
-% They can be selected either explicitly by supplying the variant
-% index (starting from one), or randomly by setting the value to,
-% obviously, |random|.
-%
-% \iffalse TODO verify that this actually works with a font that supports
-%               the salt/random feature!\fi
-% \begin{quote}
-%   \begin{verbatim}
-%   \font\librmsaltfirst=LatinModernRoman:salt=1
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent Other font options include:
-%
-% \begin{description}
-%
-% \item [mode] \hfill \\
-%        \identifier{luaotfload} has two \OpenType processing
-%        \emphasis{modes}:
-%        \identifier{base} and \identifier{node}.
-%
-%        \identifier{base} mode works by mapping \OpenType
-%        features to traditional \TEX ligature and kerning mechanisms.
-%        Supporting only non-contextual substitutions and kerning
-%        pairs, it is the slightly faster, albeit somewhat limited, variant.
-%        \identifier{node} mode works by processing \TeX’s internal
-%        node list directly at the \LUA end and supports
-%        a wider range of \OpenType features.
-%        The downside is that the intricate operations required for
-%        \identifier{node} mode may slow down typesetting especially
-%        with complex fonts and it does not work in math mode.
-%
-%        By default \identifier{luaotfload} is in \identifier{node}
-%        mode, and \identifier{base} mode has to be requested where needed,
-%        e.~g. for math fonts.
-%
-% \item [script] \label{script-tag} \hfill \\
-%        An \OpenType script tag;\footnote{%
-%          See \url{http://www.microsoft.com/typography/otspec/scripttags.htm}
-%          for a list of valid values.
-%          For scripts derived from the Latin alphabet the value
-%          |latn| is good choice.
-%        }
-%        the default value is |dlft|.
-%        Some fonts, including very popular ones by foundries like Adobe,
-%        do not assign features to the |dflt| script, in
-%        which case the script needs to be set explicitly.
-%
-% \item [language] \hfill \\
-%        An \OpenType language system identifier,\footnote{%
-%          Cf. \url{http://www.microsoft.com/typography/otspec/languagetags.htm}.
-%        }
-%        defaulting to |dflt|.
-%
-% \item [featurefile] \hfill \\
-%        A comma-separated list of feature files to be applied to the
-%        font.
-%        Feature files contain a textual representation of
-%        \OpenType tables and extend the features of a font
-%        on fly.
-%        After they are applied to a font, features defined in a
-%        feature file can be enabled or disabled just like any
-%        other font feature.
-%        The syntax is documented in \identifier{Adobe}’s
-%        \OpenType Feature File Specification.\footnote{%
-%          Cf. \url{http://www.adobe.com/devnet/opentype/afdko/topic_feature_file_syntax.html}.
-%        }
-%
-%        For a demonstration of how to set a |tkrn| feature consult
-%        the file |tkrn.fea| that is part of \identifier{luaotfload}.
-%        It can be read and applied as follows:
-%
-%        |\font\test=Latin Modern Roman:featurefile=tkrn.fea;+tkrn|
-%
-% \item [color] \hfill \\
-%        A font color, defined as a triplet of two-digit hexadecimal
-%        \abbrev{rgb} values, with an optional fourth value for
-%        transparency
-%        (where |00| is completely transparent and |FF| is opaque).
-%
-%        For example, in order to set text in semitransparent red:
-%
-%        \begin{quote}
-%           \begin{verbatim}
-%  \font\test={Latin Modern Roman}:color=FF0000BB
-%           \end{verbatim}
-%        \end{quote}
-%
-% \item [kernfactor \& letterspace] \hfill \\
-%        Define a font with letterspacing (tracking) enabled.
-%        In \identifier{luaotfload}, letterspacing is implemented by
-%        inserting additional kerning between glyphs.
-%
-%        This approach is derived from and still quite similar to the
-%        \emphasis{character kerning} (\texmacro{setcharacterkerning} /
-%        \texmacro{definecharacterkerning} \& al.) functionality of
-%        Context, see the file \fileent{typo-krn.lua} there.
-%        The main difference is that \identifier{luaotfload} does not
-%        use \LUATEX attributes to assign letterspacing to regions,
-%        but defines virtual letterspaced versions of a font.
-%
-%        The option \identifier{kernfactor} accepts a numeric value that
-%        determines the letterspacing factor to be applied to the font
-%        size.
-%        E.~g. a kern factor of $0.42$ applied to a $10$ pt font
-%        results in $4.2$ pt of additional kerning applied to each
-%        pair of glyphs.
-%        Ligatures are split into their component glyphs unless
-%        explicitly ignored (see below).
-%
-%        For compatibility with \XETEX an alternative
-%        \identifier{letterspace} option is supplied that interprets the
-%        supplied value as a \emphasis{percentage} of the font size but
-%        is otherwise identical to \identifier{kernfactor}.
-%        Consequently, both definitions in below snippet yield the same
-%        letterspacing width:
-%
-%        \begin{quote}
-%               \begin{verbatim}
-%  \font\iwonakernedA="file:Iwona-Regular.otf:kernfactor=0.125"
-%  \font\iwonakernedB="file:Iwona-Regular.otf:letterspace=12.5"
-%               \end{verbatim}
-%        \end{quote}
-%
-%        Specific pairs of letters and ligatures may be exempt from
-%        letterspacing by defining the \LUA functions
-%        \luafunction{keeptogether} and \luafunction{keepligature},
-%        respectively, inside the namespace \verb|luaotfload.letterspace|.
-%        Both functions are called whenever the letterspacing callback
-%        encounters an appropriate node or set of nodes.
-%        If they return a true-ish value, no extra kern is inserted at
-%        the current position.
-%        \luafunction{keeptogether} receives a pair of consecutive
-%        glyph nodes in order of their appearance in the node list.
-%        \luafunction{keepligature} receives a single node which can be
-%        analyzed into components.
-%        (For details refer to the \emphasis{glyph nodes} section in the
-%        \LUATEX reference manual.)
-%        The implementation of both functions is left entirely to the
-%        user.
-%
-%
-% \item [protrusion \& expansion] \hfill \\
-%        These keys control microtypographic features of the font,
-%        namely \emphasis{character protrusion} and \emphasis{font
-%        expansion}.
-%        Their arguments are names of \LUA tables that contain
-%        values for the respective features.\footnote{%
-%           For examples of the table layout please refer to the
-%           section of the file \fileent{luaotfload-fonts-ext.lua} where the
-%           default values are defined.
-%           Alternatively and with loss of information, you can dump
-%           those tables into your terminal by issuing
-%           \begin{verbatim}
-%  \directlua{inspect(fonts.protrusions.setups.default)
-%             inspect(fonts.expansions.setups.default)}
-%           \end{verbatim}
-%           at some point after loading \fileent{luaotfload.sty}.
-%        }
-%        For both, only the set \identifier{default} is predefined.
-%
-%        For example, to define a font with the default
-%        protrusion vector applied\footnote{%
-%          You also need to set
-%              \verb|pdfprotrudechars=2| and
-%              \verb|pdfadjustspacing=2|
-%          to activate protrusion and expansion, respectively.
-%          See the
-%          \href{http://mirrors.ctan.org/systems/pdftex/manual/pdftex-a.pdf}%
-%               {\PDFTEX manual}
-%          for details.
-%        }:
-%
-%        \begin{quote}
-%           \begin{verbatim}
-%  \font\test=LatinModernRoman:protrusion=default
-%           \end{verbatim}
-%        \end{quote}
-% \end{description}
-%
-% \paragraph{Non-standard font features}
-% \identifier{luaotfload} adds a number of features that are not defined
-% in the original \OpenType specification, most of them
-% aiming at emulating the behavior familiar from other \TEX engines.
-% Currently (2014) there are three of them:
-%
-% \begin{description}
-%
-%   \item [anum]
-%           Substitutes the glyphs in the \abbrev{ascii} number range
-%           with their counterparts from eastern Arabic or Persian,
-%           depending on the value of \identifier{language}.
-%
-%   \item [tlig]
-%           Applies legacy \TEX ligatures:
-%
-%           \begin{tabular}{rlrl}
-%              ``  &  \verb|``|  &  ''  &  \verb|''|  \\
-%              `   &  \verb|`|   &  '   &  \verb|'|   \\
-%              "   &  \verb|"|   &  --  &  \verb|--|  \\
-%              --- &  \verb|---| &  !`  &  \verb|!`|  \\
-%              ?`  &  \verb|?`|  &      &             \\
-%           \end{tabular}
-%
-%           \footnote{%
-%             These contain the feature set \verb|trep| of earlier
-%             versions of \identifier{luaotfload}.
-%
-%             Note to \XETEX users: this is the equivalent of the
-%             assignment \verb|mapping=text-tex| using \XETEX's input
-%             remapping feature.
-%           }
-%
-%   \item [itlc]
-%           Computes italic correction values (active by default).
-%
-% \end{description}
-%
-%
-%
-% \section{Font names database}
-% \label{sec:fontdb}
-%
-% As mentioned above, \identifier{luaotfload} keeps track of which
-% fonts are available to \LUATEX by means of a \emphasis{database}.
-% This allows referring to fonts not only by explicit filenames but
-% also by the proper names contained in the metadata which is often
-% more accessible to humans.\footnote{%
-%   The tool \href{http://www.lcdf.org/type/}{\fileent{otfinfo}} (comes
-%   with \TEX Live), when invoked on a font file with the \verb|-i|
-%   option, lists the variety of name fields defined for it.
-% }
-%
-% When \identifier{luaotfload} is asked to load a font by a font name,
-% it will check if the database exists and load it, or else generate a
-% fresh one.
-% Should it then fail to locate the font, an update to the database is
-% performed in case the font has been added to the system only
-% recently.  As soon as the database is updated, the resolver will try
-% and look up the font again, all without user intervention.
-% The goal is for \identifier{luaotfload} to act in the background and
-% behave as unobtrusively as possible, while providing a convenient
-% interface to the fonts installed on the system.
-%
-% Generating the database for the first time may take a while since it
-% inspects every font file on your computer.
-% This is particularly noticeable if it occurs during a typesetting run.
-% In any case, subsequent updates to the database will be quite fast.
-%
-% \subsection[luaotfload-tool / mkluatexfontdb.lua]%
-%            {\fileent{luaotfload-tool} /
-%             \fileent{mkluatexfontdb.lua}\footnote{%
-%   The script may be named just \fileent{mkluatexfontdb} in your
-%   distribution.
-% }}
-%
-% It can still be desirable at times to do some of these steps
-% manually, and without having to compile a document.
-% To this end, \identifier{luaotfload} comes with the utility
-% \fileent{luaotfload-tool} that offers an interface to the database
-% functionality.
-% Being a \LUA script, there are two ways to run it:
-% either make it executable (\verb|chmod +x| on unixoid systems) or
-% pass it as an argument to \fileent{texlua}.\footnote{%
-%   Tests by the maintainer show only marginal performance gain by
-%   running with Luigi Scarso’s
-%   \href{https://foundry.supelec.fr/projects/luajittex/}%
-%        {\identifier{Luajit\kern-.25ex\TEX}},
-%   which is probably due to the fact that most of the time is spent
-%   on file system operations.
-%
-%   \emphasis{Note}:
-%   On \abbrev{MS} \identifier{Windows} systems, the script can be run
-%   either by calling the wrapper application
-%   \fileent{luaotfload-tool.exe} or as
-%   \verb|texlua.exe luaotfload-tool.lua|.
-% }
-% Invoked with the argument \verb|--update| it will perform a database
-% update, scanning for fonts not indexed.
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool --update
-%   \end{verbatim}
-% \end{quote}
-%
-% Adding the \verb|--force| switch will initiate a complete
-% rebuild of the database.
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool --update --force
-%   \end{verbatim}
-% \end{quote}
-%
-% For sake of backwards compatibility, \fileent{luaotfload-tool} may be
-% renamed or symlinked to \fileent{mkluatexfontdb}.
-% Whenever it is run under this name, it will update the database
-% first, mimicking the behavior of earlier versions of
-% \identifier{luaotfload}.
-%
-% \subsection{Search Paths}
-%
-% \identifier{luaotfload} scans those directories where fonts are
-% expected to be located on a given system.
-% On a Linux machine it follows the paths listed in the
-% \identifier{Fontconfig} configuration files;
-% consult \verb|man 5 fonts.conf| for further information.
-% On \identifier{Windows} systems, the standard location is
-% \verb|Windows\Fonts|,
-% while \identifier{Mac OS~X} requires a multitude of paths to
-% be examined.
-% The complete list is is given in table \ref{table-searchpaths}.
-% Other paths can be specified by setting the environment variable
-% \verb+OSFONTDIR+.
-% If it is non-empty, then search will be extended to the included
-% directories.
-%
-% \begin{table}[t]
-%   \hrule
-%   \caption{List of paths searched for each supported operating
-%            system.}
-%   \renewcommand{\arraystretch}{1.2}
-%   \begin{center}
-%     \begin{tabular}{lp{.5\textwidth}}
-%       Windows     & \verb|%WINDIR%\Fonts|
-%       \\
-%       Linux       & \fileent{/usr/local/etc/fonts/fonts.conf} and\hfill\break
-%                     \fileent{/etc/fonts/fonts.conf}
-%       \\
-%       Mac         & \fileent{\textasciitilde/Library/Fonts},\break
-%                     \fileent{/Library/Fonts},\break
-%                     \fileent{/System/Library/Fonts}, and\hfill\break
-%                     \fileent{/Network/Library/Fonts}
-%       \\
-%     \end{tabular}
-%   \end{center}
-%   \label{table-searchpaths}
-%   \hrule
-% \end{table}
-%
-% \subsection{Querying from Outside}
-%
-% \fileent{luaotfload-tool} also provides rudimentary means of
-% accessing the information collected in the font database.
-% If the option \verb|--find=|\emphasis{name} is given, the script will
-% try and search the fonts indexed by \identifier{luaotfload} for a
-% matching name.
-% For instance, the invocation
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool  --find="Iwona Regular"
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent
-% will verify if “Iwona Regular” is found in the database and can be
-% readily requested in a document.
-%
-% If you are unsure about the actual font name, then add the
-% \verb|-F| (or \verb|--fuzzy|) switch to the command line to enable
-% approximate matching.
-% Suppose you cannot precisely remember if the variant of
-% \identifier{Iwona} you are looking for was “Bright” or “Light”.
-% The query
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool  -F --find="Iwona Bright"
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent
-% will tell you that indeed the latter name is correct.
-%
-% Basic information about fonts in the database can be displayed
-% using the \verb|-i| option (\verb|--info|).
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool  -i --find="Iwona Light Italic"
-%   \end{verbatim}
-% \end{quote}
-% \noindent
-% The meaning of the printed values is described in section 4.4 of the
-% \LUATEX reference manual.\footnote{%
-%   In \TEX Live: \fileent{texmf-dist/doc/luatex/base/luatexref-t.pdf}.
-% }
-%
-% For a much more detailed report about a given font try the \verb|-I| option
-% instead (\verb|--inspect|).
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool  -I --find="Iwona Light Italic"
-%   \end{verbatim}
-% \end{quote}
-%
-% \verb|luaotfload-tool --help| will list the available command line
-% switches, including some not discussed in detail here.
-% For a full documentation of \identifier{luaotfload-tool} and its
-% capabilities refer to the manpage
-% (\verb|man 1 luaotfload-tool|).\footnote{%
-%   Or see \verb|luaotfload-tool.rst| in the source directory.
-% }
-%
-% \subsection{Blacklisting Fonts}
-% \label{font-blacklist}
-%
-% Some fonts are problematic in general, or just in \LUATEX.
-% If you find that compiling your document takes far too long or eats
-% away all your system’s memory, you can track down the culprit by
-% running \verb|luaotfload-tool -v| to increase verbosity.
-% Take a note of the \emphasis{filename} of the font that database
-% creation fails with and append it to the file
-% \fileent{luaotfload-blacklist.cnf}.
-%
-% A blacklist file is a list of font filenames, one per line.
-% Specifying the full path to where the file is located is optional, the
-% plain filename should suffice.
-% File extensions (\fileent{.otf}, \fileent{.ttf}, etc.) may be omitted.
-% Anything after a percent (|%|) character until the end of the line
-% is ignored, so use this to add comments.
-% Place this file to some location where the \identifier{kpse}
-% library can find it, e.~g.
-% \fileent{texmf-local/tex/luatex/luaotfload} if you are running
-% \identifier{\TEX Live},\footnote{%
-%   You may have to run \verb|mktexlsr| if you created a new file in
-%   your \fileent{texmf} tree.
-% }
-% or just leave it in the working directory of your document.
-% \identifier{luaotfload} reads all files named
-% \fileent{luaotfload-blacklist.cnf} it finds, so the fonts in
-% \fileent{./luaotfload-blacklist.cnf} extend the global blacklist.
-%
-% Furthermore, a filename prepended with a dash character (|-|) is
-% removed from the blacklist, causing it to be temporarily whitelisted
-% without modifying the global file.
-% An example with explicit paths:
-%
-% \begin{verbatim}
-% % example otf-blacklist.cnf
-% /Library/Fonts/GillSans.ttc  % Luaotfload ignores this font.
-% -/Library/Fonts/Optima.ttc   % This one is usable again, even if
-%                              % blacklisted somewhere else.
-% \end{verbatim}
-%
-% \section{Files from \CONTEXT and \LUATEX-Fonts}
-%
-% \identifier{luaotfload} relies on code originally written by Hans
-% Hagen\footnote{%
-%   The creator of the \href{http://wiki.contextgarden.net}{\CONTEXT}
-%   format.
-% }
-% for and tested with \CONTEXT.
-% It integrates the font loader as distributed in
-% the \identifier{\LUATEX-Fonts} package.
-% The original \LUA source files have been combined using the
-% \fileent{mtx-package} script into a single, self-contained blob.
-% In this form the font loader has no further dependencies\footnote{%
-%   It covers, however, to some extent the functionality of the
-%   \identifier{lualibs} package.
-% }
-% and requires only minor adaptions to integrate into
-% \identifier{luaotfload}.
-% The guiding principle is to let \CONTEXT/\LUATEX-Fonts take care of
-% the implementation, and update the imported code from time to time.
-% As maintainers, we aim at importing files from upstream essentially
-% \emphasis{unmodified}, except for renaming them to prevent name
-% clashes.
-% This job has been greatly alleviated since the advent of
-% \LUATEX-Fonts, prior to which the individual dependencies had to be
-% manually spotted and extracted from the \CONTEXT source code in a
-% complicated and error-prone fashion.
-%
-% Below is a commented list of the files distributed with
-% \identifier{luaotfload} in one way or the other.
-% See figure \ref{file-graph} on page \pageref{file-graph} for a
-% graphical representation of the dependencies.
-% From \LUATEX-Fonts, only the file \fileent{luatex-fonts-merged.lua}
-% has been imported as \fileent{luaotfload-fontloader.lua}.
-% It is generated by \fileent{mtx-package}, a \LUA source code merging
-% too developed by Hans Hagen.\footnote{%
-%   \fileent{mtx-package} is
-%   \href
-%     {http://repo.or.cz/w/context.git/blob_plain/refs/heads/origin:/scripts/context/lua/mtx-package.lua}
-%     {part of \CONTEXT}
-%   and requires \fileent{mtxrun}.
-%   Run
-%   \verb|mtxrun --script package --help|
-%   to display further information.
-%   For the actual merging code see the file
-%   \fileent{util-mrg.lua} that is part of \CONTEXT.
-% }
-% It houses several \LUA files that can be classed in three
-% categories.
-%
-%   \begin{itemize}
-%     \let\normalitem=\item
-%     \def\incitem#1{%
-%       \normalitem{\fileent{#1}}
-%     }
-%     \normalitem \emphasis{\LUA utility libraries}, a subset
-%                 of what is provided by the \identifier{lualibs}
-%                 package.
-%
-%                 \begin{multicols}{2}
-%                   \begin{itemize}
-%                     \incitem{l-lua.lua}       \incitem{l-lpeg.lua}
-%                     \incitem{l-function.lua}  \incitem{l-string.lua}
-%                     \incitem{l-table.lua}     \incitem{l-io.lua}
-%                     \incitem{l-file.lua}      \incitem{l-boolean.lua}
-%                     \incitem{l-math.lua}      \incitem{util-str.lua}
-%                   \end{itemize}
-%                 \end{multicols}
-%
-%     \normalitem The \emphasis{font loader} itself.
-%                 These files have been written for
-%                 \LUATEX-Fonts and they are distributed along
-%                 with \identifier{luaotfload}.
-%                 \begin{multicols}{2}
-%                   \begin{itemize}
-%                     \incitem{luatex-basics-gen.lua}
-%                     \incitem{luatex-basics-nod.lua}
-%                     \incitem{luatex-fonts-enc.lua}
-%                     \incitem{luatex-fonts-syn.lua}
-%                     \incitem{luatex-fonts-tfm.lua}
-%                     \incitem{luatex-fonts-chr.lua}
-%                     \incitem{luatex-fonts-lua.lua}
-%                     \incitem{luatex-fonts-inj.lua}
-%                     \incitem{luatex-fonts-otn.lua}
-%                     \incitem{luatex-fonts-def.lua}
-%                     \incitem{luatex-fonts-ext.lua}
-%                     \incitem{luatex-fonts-cbk.lua}
-%                   \end{itemize}
-%                 \end{multicols}
-%
-%     \normalitem Code related to \emphasis{font handling and
-%                 node processing}, taken directly from
-%                 \CONTEXT.
-%                 \begin{multicols}{2}
-%                   \begin{itemize}
-%                     \incitem{data-con.lua} \incitem{font-ini.lua}
-%                     \incitem{font-con.lua} \incitem{font-cid.lua}
-%                     \incitem{font-map.lua} \incitem{font-oti.lua}
-%                     \incitem{font-otf.lua} \incitem{font-otb.lua}
-%                     \incitem{font-ota.lua} \incitem{font-def.lua}
-%                     \incitem{font-otp.lua}
-%                   \end{itemize}
-%                 \end{multicols}
-%   \end{itemize}
-%
-% Note that if \identifier{luaotfload} cannot locate the
-% merged file, it will load the individual \LUA libraries
-% instead.
-% Their names remain the same as in \CONTEXT (without the
-% \verb|otfl|-prefix) since we imported the relevant section of
-% \fileent{luatex-fonts.lua} unmodified into \fileent{luaotfload-main.lua}.
-% Thus if you prefer running bleeding edge code from the
-% \CONTEXT beta, all you have to do is remove
-% \fileent{luaotfload-merged.lua} from the search path.
-%
-% Also, the merged file at some point
-% loads the Adobe Glyph List from a \LUA table that is contained in
-% \fileent{luaotfload-glyphlist.lua}, which is automatically generated by the
-% script \fileent{mkglyphlist}.\footnote{%
-%   See \fileent{luaotfload-font-enc.lua}.
-%   The hard-coded file name is why we have to replace the procedure
-%   that loads the file in \fileent{luaotfload-override.lua}.
-% }
-% There is a make target \identifier{glyphs} that will create a fresh
-% glyph list so we don’t need to import it from \CONTEXT
-% any longer.
-%
-% In addition to these, \identifier{luaotfload} requires a number of
-% files not contained in the merge. Some of these have no equivalent in
-% \LUATEX-Fonts or \CONTEXT, some were taken unmodified from the
-% latter.
-%
-% \begin{itemize}
-%     \let\normalitem=\item
-%     \def\ouritem#1{%
-%       \normalitem{\fileent{#1}}%
-%       \space--\hskip1em
-%     }
-%     \ouritem {luaotfload-features.lua}     font feature handling;
-%                                            incorporates some of the code from
-%                                            \fileent{font-otc} from \CONTEXT;
-%     \ouritem {luaotfload-override.lua}     overrides the \CONTEXT logging
-%                                            functionality.
-%     \ouritem {luaotfload-loaders.lua}      registers the \OpenType
-%                                            font reader as handler for
-%                                            Postscript fonts
-%                                            (\abbrev{pfa}, \abbrev{pfb}).
-%     \ouritem {luaotfload-parsers.lua}      various \abbrev{lpeg}-based parsers.
-%     \ouritem {luaotfload-database.lua}     font names database.
-%     \ouritem {luaotfload-colors.lua}       color handling.
-%     \ouritem {luaotfload-auxiliary.lua}    access to internal functionality
-%                                            for package authors
-%                                            (proposals for additions welcome).
-%     \ouritem {luaotfload-letterspace.lua}  font-based letterspacing.
-% \end{itemize}
-%
-% \begin{figure}[b]
-%   \caption{Schematic of the files in \identifier{Luaotfload}}
-%   \includegraphics[width=\textwidth]{filegraph.pdf}
-%   \label{file-graph}
-% \end{figure}
-%
-% \section{Auxiliary Functions}
-%
-% With release version 2.2, \identifier{luaotfload} received
-% additional functions for package authors to call from outside
-% (see the file \fileent{luaotfload-auxiliary.lua} for details).
-% The purpose of this addition twofold.
-% Firstly, \identifier{luaotfload} failed to provide a stable interface
-% to internals in the past which resulted in an unmanageable situation
-% of different packages abusing the raw access to font objects by means
-% of the \luafunction{patch_font} callback.
-% When the structure of the font object changed due to an update, all
-% of these imploded and several packages had to be fixed while
-% simultaneously providing fallbacks for earlier versions.
-% Now the patching is done on the \identifier{luaotfload} side and can
-% be adapted with future modifications to font objects without touching
-% the packages that depend on it.
-% Second, some the capabilities of the font loader and the names
-% database are not immediately relevant in \identifier{luaotfload}
-% itself but might nevertheless be of great value to package authors or
-% end users.
-%
-% Note that the current interface is not yet set in stone and the
-% development team is open to suggestions for improvements or
-% additions.
-%
-% \subsection{Callback Functions}
-%
-% The \luafunction{patch_font} callback is inserted in the wrapper
-% \identifier{luaotfload} provides for the font definition callback
-% (see below, page \pageref{define-font}).
-% At this place it allows manipulating the font object immediately after
-% the font loader is done creating it.
-% For a short demonstration of its usefulness, here is a snippet that
-% writes an entire font object to the file \fileent{fontdump.lua}:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%   \input luaotfload.sty
-%   \directlua{
-%     local dumpfile    = "fontdump.lua"
-%     local dump_font   = function (tfmdata)
-%       local data = table.serialize(tfmdata)
-%       io.savedata(dumpfile, data)
-%     end
-%
-%     luatexbase.add_to_callback(
-%       "luaotfload.patch_font",
-%       dump_font,
-%       "my_private_callbacks.dump_font"
-%     )
-%   }
-%   \font\dumpme=name:Iwona
-%   \bye
-%   \end{verbatim}
-% \end{quote}
-%
-% \emphasis{Beware}: this creates a Lua file of around 150,000 lines of
-% code, taking up 3~\abbrev{mb} of disk space.
-% By inspecting the output you can get a first impression of how a font
-% is structured in \LUATEX’s memory, what elements it is composed of,
-% and in what ways it can be rearranged.
-%
-% \subsubsection{Compatibility with Earlier Versions}
-%
-% As has been touched on in the preface to this section, the structure
-% of the object as returned by the fontloader underwent rather drastic
-% changes during different stages of its development, and not all
-% packages that made use of font patching have kept up with every one
-% of it.
-% To ensure compatibility with these as well as older versions of
-% some packages, \identifier{luaotfload} sets up copies of or references
-% to data in the font table where it used to be located.
-% For instance, important parameters like the requested point size, the
-% units factor, and the font name have again been made accessible from
-% the toplevel of the table even though they were migrated to different
-% subtables in the meantime.
-%
-% \subsubsection{Patches}
-%
-% These are mostly concerned with establishing compatibility with
-% \XETEX.
-%
-% \begin{itemize}
-%   \let\normalitem=\item
-%   \def\ouritem#1{%
-%     \normalitem{\luafunction{#1}}%
-%     \hfill\break
-%   }
-%
-%   \ouritem  {set_sscale_dimens}
-%             Calculate \texmacro{fontdimen}s 10 and 11 to emulate \XETEX.
-%
-%   \ouritem  {set_capheight}
-%             Calculates \texmacro{fontdimen} 8 like \XETEX.
-%
-%   \ouritem  {patch_cambria_domh}
-%             Correct some values of the font \emphasis{Cambria Math}.
-%
-% \end{itemize}
-%
-% \subsection{Package Author’s Interface}
-%
-% As \LUATEX release 1.0 is nearing, the demand for a reliable interface
-% for package authors increases.
-%
-% \subsubsection{Font Properties}
-%
-% Below functions mostly concern querying the different components of a
-% font like for instance the glyphs it contains, or what font features
-% are defined for which scripts.
-%
-% \begin{itemize}
-%   \let\normalitem=\item
-%   \def\ouritem#1{%
-%     \normalitem{\luafunction{#1}}%
-%     \hfill\break
-%   }
-%
-%   \ouritem  {aux.font_has_glyph (id : int, index : int)}
-%             Predicate that returns true if the font \luafunction{id}
-%             has glyph \luafunction{index}.
-%
-%   \ouritem  {aux.slot_of_name(name : string)}
-%             Translates an Adobe Glyph name to the corresponding glyph
-%             slot.
-%
-%   \ouritem  {aux.name_of_slot(slot : int)}
-%             The inverse of \luafunction{slot_of_name}; note that this
-%             might be incomplete as multiple glyph names may map to the
-%             same codepoint, only one of which is returned by
-%             \luafunction{name_of_slot}.
-%
-%   \ouritem  {aux.provides_script(id : int, script : string)}
-%             Test if a font supports \luafunction{script}.
-%
-%   \ouritem  {aux.provides_language(id : int, script : string, language : string)}
-%             Test if a font defines \luafunction{language} for a given
-%             \luafunction{script}.
-%
-%   \ouritem  {aux.provides_feature(id : int, script : string,
-%              language : string, feature : string)}
-%             Test if a font defines \luafunction{feature} for
-%             \luafunction{language} for a given \luafunction{script}.
-%
-%   \ouritem  {aux.get_math_dimension(id : int, dimension : string)}
-%             Get the dimension \luafunction{dimension} of font \luafunction{id}.
-%
-%   \ouritem  {aux.sprint_math_dimension(id : int, dimension : string)}
-%             Same as \luafunction{get_math_dimension()}, but output the value
-%             in scaled points at the \TEX end.
-%
-% \end{itemize}
-%
-% \subsubsection{Database}
-%
-% \begin{itemize}
-%   \let\normalitem=\item
-%   \def\ouritem#1{%
-%     \normalitem{\luafunction{#1}}%
-%     \hfill\break
-%   }
-%
-%   \ouritem  {aux.scan_external_dir(dir : string)}
-%             Include fonts in directory \luafunction{dir} in font lookups without
-%             adding them to the database.
-%
-% \end{itemize}
-%
-% \section{Troubleshooting}
-%
-% \subsection {Database Generation}
-% If you encounter problems with some fonts, please first update to the latest
-% version of this package before reporting a bug, as
-% \identifier{luaotfload} is under active development and still a
-% moving target.
-% The development takes place on \identifier{github} at
-% \url{https://github.com/lualatex/luaotfload} where there is an issue
-% tracker for submitting bug reports, feature requests and the likes
-% requests and the likes.
-%
-% Bug reports are more likely to be addressed if they contain the output of
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool --diagnose=environment,files,permissions
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent Consult the man page for a description of these options.
-%
-% Errors during database generation can be traced by increasing the
-% verbosity level and redirecting log output to \fileent{stdout}:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool -fuvvv --log=stdout
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent or to a file in \fileent{/tmp}:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool -fuvvv --log=file
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent In the latter case, invoke the \verb|tail(1)| utility on the file
-% for live monitoring of the progress.
-%
-% If database generation fails, the font last printed to the terminal or log
-% file is likely to be the culprit.
-% Please specify it when reporting a bug, and blacklist it for the time
-% being (see above, page \pageref{font-blacklist}).
-%
-% \subsection {Font Features}
-% A common problem is the lack of features for some
-% \OpenType fonts even when specified.
-% This can be related to the fact that some fonts do not provide
-% features for the \verb|dflt| script (see above on page
-% \pageref{script-tag}),
-% which is the default one in this package.
-% If this happens, assigning a noth script when the font is defined should
-% fix it.
-% For example with \verb|latn|:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     \font\test=file:MyFont.otf:script=latn;+liga;
-%   \end{verbatim}
-% \end{quote}
-%
-% You can get a list of features that a font defines for scripts and languages
-% by querying it in \fileent{luaotfload-tool}:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     luaotfload-tool --find="Iwona" --inspect
-%   \end{verbatim}
-% \end{quote}
-%
-% \subsection {\LUATEX Programming}
-% Another strategy that helps avoiding problems is to not access raw \LUATEX
-% internals directly.
-% Some of them, even though they are dangerous to access, have not been
-% overridden or disabled.
-% Thus, whenever possible prefer the functions in the
-% \luafunction{aux} namespace over direct manipulation of font objects.
-% For example, raw access to the \luafunction{font.fonts} table like:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     local somefont = font.fonts[2]
-%   \end{verbatim}
-% \end{quote}
-%
-% \noindent can render already defined fonts unusable.
-% Instead, the function \luafunction{font.getfont()} should be used because
-% it has been replaced by a safe variant.
-%
-% However, \luafunction{font.getfont()} only covers fonts handled by the font
-% loader, e.~g. \identifier{OpenType} and \identifier{TrueType} fonts, but
-% not \abbrev{tfm} or \abbrev{ofm}.
-% Should you absolutely require access to all fonts known to \LUATEX, including
-% the virtual and autogenerated ones, then you need to query both
-% \luafunction{font.getfont()} and \luafunction{font.fonts}.
-% In this case, best define you own accessor:
-%
-% \begin{quote}
-%   \begin{verbatim}
-%     local unsafe_getfont = function (id)
-%         local tfmdata = font.getfont (id)
-%         if not tfmdata then
-%             tfmdata = font.fonts[id]
-%         end
-%         return tfmdata
-%     end
-%
-%     --- use like getfont()
-%     local somefont = unsafe_getfont (2)
-%   \end{verbatim}
-% \end{quote}
-%
-% \part{Implementation}
-%
-% \section{\fileent{luaotfload.lua}}
-%
-% As of version 2.5, the file \fileent{luaotfload.lua} is no longer
-% generated from the \abbrev{dtx}.
-% Instead, it is maintained separately as a plain \identifier{Lua} file
-% \fileent{luaotfload-main.lua} in the Luaotfload \identifier{git} tree.
-% The file documentation which used to be found in this section has
-% been preserved in the comments.
-%
-% \section{\fileent{luaotfload.sty}}
-%
-% As of version 2.5, the file \fileent{luaotfload.sty} is no longer
-% generated from the \abbrev{dtx}.
-% Instead, it is maintained separately as a plain \identifier{\TEX} file
-% in the Luaotfload \identifier{git} tree.
-% The file documentation which used to be found in this section has
-% been preserved in the comments.
-%
-% \clearpage
-% \section{The GNU GPL License v2}
-%
-% The GPL requires the complete license text to be distributed along
-% with the code. I recommend the canonical source, instead:
-% \url{http://www.gnu.org/licenses/old-licenses/gpl-2.0.html}.
-% But if you insist on an included copy, here it is.
-% You might want to zoom in.
-%
-% \newsavebox{\gpl}
-% \begin{lrbox}{\gpl}
-% \begin{minipage}{3\textwidth}
-% \columnsep=3\columnsep
-% \begin{multicols}{3}
-% \begin{center}
-% {\Large GNU GENERAL PUBLIC LICENSE\par}
-% \bigskip
-% {Version 2, June 1991}
-% \end{center}
-%
-% \begin{center}
-% {\parindent 0in
-%
-% Copyright \textcopyright\ 1989, 1991 Free Software Foundation, Inc.
-%
-% \bigskip
-%
-% 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
-%
-% \bigskip
-%
-% Everyone is permitted to copy and distribute verbatim copies
-% of this license document, but changing it is not allowed.
-% }
-% \end{center}
-%
-% \begin{center}
-% {\bf\large Preamble}
-% \end{center}
-%
-%
-% The licenses for most software are designed to take away your freedom to
-% share and change it.  By contrast, the GNU General Public License is
-% intended to guarantee your freedom to share and change free software---to
-% make sure the software is free for all its users.  This General Public
-% License applies to most of the Free Software Foundation's software and to
-% any other program whose authors commit to using it.  (Some other Free
-% Software Foundation software is covered by the GNU Library General Public
-% License instead.)  You can apply it to your programs, too.
-%
-% When we speak of free software, we are referring to freedom, not price.
-% Our General Public Licenses are designed to make sure that you have the
-% freedom to distribute copies of free software (and charge for this service
-% if you wish), that you receive source code or can get it if you want it,
-% that you can change the software or use pieces of it in new free programs;
-% and that you know you can do these things.
-%
-% To protect your rights, we need to make restrictions that forbid anyone to
-% deny you these rights or to ask you to surrender the rights.  These
-% restrictions translate to certain responsibilities for you if you
-% distribute copies of the software, or if you modify it.
-%
-% For example, if you distribute copies of such a program, whether gratis or
-% for a fee, you must give the recipients all the rights that you have.  You
-% must make sure that they, too, receive or can get the source code.  And
-% you must show them these terms so they know their rights.
-%
-% We protect your rights with two steps: (1) copyright the software, and (2)
-% offer you this license which gives you legal permission to copy,
-% distribute and/or modify the software.
-%
-% Also, for each author's protection and ours, we want to make certain that
-% everyone understands that there is no warranty for this free software.  If
-% the software is modified by someone else and passed on, we want its
-% recipients to know that what they have is not the original, so that any
-% problems introduced by others will not reflect on the original authors'
-% reputations.
-%
-% Finally, any free program is threatened constantly by software patents.
-% We wish to avoid the danger that redistributors of a free program will
-% individually obtain patent licenses, in effect making the program
-% proprietary.  To prevent this, we have made it clear that any patent must
-% be licensed for everyone's free use or not licensed at all.
-%
-% The precise terms and conditions for copying, distribution and
-% modification follow.
-%
-% \begin{center}
-% {\Large \sc Terms and Conditions For Copying, Distribution and
-%   Modification}
-% \end{center}
-%
-% \begin{enumerate}
-% \item
-% This License applies to any program or other work which contains a notice
-% placed by the copyright holder saying it may be distributed under the
-% terms of this General Public License.  The ``Program'', below, refers to
-% any such program or work, and a ``work based on the Program'' means either
-% the Program or any derivative work under copyright law: that is to say, a
-% work containing the Program or a portion of it, either verbatim or with
-% modifications and/or translated into another language.  (Hereinafter,
-% translation is included without limitation in the term ``modification''.)
-% Each licensee is addressed as ``you''.
-%
-% Activities other than copying, distribution and modification are not
-% covered by this License; they are outside its scope.  The act of
-% running the Program is not restricted, and the output from the Program
-% is covered only if its contents constitute a work based on the
-% Program (independent of having been made by running the Program).
-% Whether that is true depends on what the Program does.
-%
-% \item You may copy and distribute verbatim copies of the Program's source
-%   code as you receive it, in any medium, provided that you conspicuously
-%   and appropriately publish on each copy an appropriate copyright notice
-%   and disclaimer of warranty; keep intact all the notices that refer to
-%   this License and to the absence of any warranty; and give any other
-%   recipients of the Program a copy of this License along with the Program.
-%
-% You may charge a fee for the physical act of transferring a copy, and you
-% may at your option offer warranty protection in exchange for a fee.
-%
-% \item
-% You may modify your copy or copies of the Program or any portion
-% of it, thus forming a work based on the Program, and copy and
-% distribute such modifications or work under the terms of Section 1
-% above, provided that you also meet all of these conditions:
-%
-% \begin{enumerate}
-%
-% \item
-% You must cause the modified files to carry prominent notices stating that
-% you changed the files and the date of any change.
-%
-% \item
-% You must cause any work that you distribute or publish, that in
-% whole or in part contains or is derived from the Program or any
-% part thereof, to be licensed as a whole at no charge to all third
-% parties under the terms of this License.
-%
-% \item
-% If the modified program normally reads commands interactively
-% when run, you must cause it, when started running for such
-% interactive use in the most ordinary way, to print or display an
-% announcement including an appropriate copyright notice and a
-% notice that there is no warranty (or else, saying that you provide
-% a warranty) and that users may redistribute the program under
-% these conditions, and telling the user how to view a copy of this
-% License.  (Exception: if the Program itself is interactive but
-% does not normally print such an announcement, your work based on
-% the Program is not required to print an announcement.)
-%
-% \end{enumerate}
-%
-%
-% These requirements apply to the modified work as a whole.  If
-% identifiable sections of that work are not derived from the Program,
-% and can be reasonably considered independent and separate works in
-% themselves, then this License, and its terms, do not apply to those
-% sections when you distribute them as separate works.  But when you
-% distribute the same sections as part of a whole which is a work based
-% on the Program, the distribution of the whole must be on the terms of
-% this License, whose permissions for other licensees extend to the
-% entire whole, and thus to each and every part regardless of who wrote it.
-%
-% Thus, it is not the intent of this section to claim rights or contest
-% your rights to work written entirely by you; rather, the intent is to
-% exercise the right to control the distribution of derivative or
-% collective works based on the Program.
-%
-% In addition, mere aggregation of another work not based on the Program
-% with the Program (or with a work based on the Program) on a volume of
-% a storage or distribution medium does not bring the other work under
-% the scope of this License.
-%
-% \item
-% You may copy and distribute the Program (or a work based on it,
-% under Section 2) in object code or executable form under the terms of
-% Sections 1 and 2 above provided that you also do one of the following:
-%
-% \begin{enumerate}
-%
-% \item
-%
-% Accompany it with the complete corresponding machine-readable
-% source code, which must be distributed under the terms of Sections
-% 1 and 2 above on a medium customarily used for software interchange; or,
-%
-% \item
-%
-% Accompany it with a written offer, valid for at least three
-% years, to give any third party, for a charge no more than your
-% cost of physically performing source distribution, a complete
-% machine-readable copy of the corresponding source code, to be
-% distributed under the terms of Sections 1 and 2 above on a medium
-% customarily used for software interchange; or,
-%
-% \item
-%
-% Accompany it with the information you received as to the offer
-% to distribute corresponding source code.  (This alternative is
-% allowed only for noncommercial distribution and only if you
-% received the program in object code or executable form with such
-% an offer, in accord with Subsection b above.)
-%
-% \end{enumerate}
-%
-%
-% The source code for a work means the preferred form of the work for
-% making modifications to it.  For an executable work, complete source
-% code means all the source code for all modules it contains, plus any
-% associated interface definition files, plus the scripts used to
-% control compilation and installation of the executable.  However, as a
-% special exception, the source code distributed need not include
-% anything that is normally distributed (in either source or binary
-% form) with the major components (compiler, kernel, and so on) of the
-% operating system on which the executable runs, unless that component
-% itself accompanies the executable.
-%
-% If distribution of executable or object code is made by offering
-% access to copy from a designated place, then offering equivalent
-% access to copy the source code from the same place counts as
-% distribution of the source code, even though third parties are not
-% compelled to copy the source along with the object code.
-%
-% \item
-% You may not copy, modify, sublicense, or distribute the Program
-% except as expressly provided under this License.  Any attempt
-% otherwise to copy, modify, sublicense or distribute the Program is
-% void, and will automatically terminate your rights under this License.
-% However, parties who have received copies, or rights, from you under
-% this License will not have their licenses terminated so long as such
-% parties remain in full compliance.
-%
-% \item
-% You are not required to accept this License, since you have not
-% signed it.  However, nothing else grants you permission to modify or
-% distribute the Program or its derivative works.  These actions are
-% prohibited by law if you do not accept this License.  Therefore, by
-% modifying or distributing the Program (or any work based on the
-% Program), you indicate your acceptance of this License to do so, and
-% all its terms and conditions for copying, distributing or modifying
-% the Program or works based on it.
-%
-% \item
-% Each time you redistribute the Program (or any work based on the
-% Program), the recipient automatically receives a license from the
-% original licensor to copy, distribute or modify the Program subject to
-% these terms and conditions.  You may not impose any further
-% restrictions on the recipients' exercise of the rights granted herein.
-% You are not responsible for enforcing compliance by third parties to
-% this License.
-%
-% \item
-% If, as a consequence of a court judgment or allegation of patent
-% infringement or for any other reason (not limited to patent issues),
-% conditions are imposed on you (whether by court order, agreement or
-% otherwise) that contradict the conditions of this License, they do not
-% excuse you from the conditions of this License.  If you cannot
-% distribute so as to satisfy simultaneously your obligations under this
-% License and any other pertinent obligations, then as a consequence you
-% may not distribute the Program at all.  For example, if a patent
-% license would not permit royalty-free redistribution of the Program by
-% all those who receive copies directly or indirectly through you, then
-% the only way you could satisfy both it and this License would be to
-% refrain entirely from distribution of the Program.
-%
-% If any portion of this section is held invalid or unenforceable under
-% any particular circumstance, the balance of the section is intended to
-% apply and the section as a whole is intended to apply in other
-% circumstances.
-%
-% It is not the purpose of this section to induce you to infringe any
-% patents or other property right claims or to contest validity of any
-% such claims; this section has the sole purpose of protecting the
-% integrity of the free software distribution system, which is
-% implemented by public license practices.  Many people have made
-% generous contributions to the wide range of software distributed
-% through that system in reliance on consistent application of that
-% system; it is up to the author/donor to decide if he or she is willing
-% to distribute software through any other system and a licensee cannot
-% impose that choice.
-%
-% This section is intended to make thoroughly clear what is believed to
-% be a consequence of the rest of this License.
-%
-% \item
-% If the distribution and/or use of the Program is restricted in
-% certain countries either by patents or by copyrighted interfaces, the
-% original copyright holder who places the Program under this License
-% may add an explicit geographical distribution limitation excluding
-% those countries, so that distribution is permitted only in or among
-% countries not thus excluded.  In such case, this License incorporates
-% the limitation as if written in the body of this License.
-%
-% \item
-% The Free Software Foundation may publish revised and/or new versions
-% of the General Public License from time to time.  Such new versions will
-% be similar in spirit to the present version, but may differ in detail to
-% address new problems or concerns.
-%
-% Each version is given a distinguishing version number.  If the Program
-% specifies a version number of this License which applies to it and ``any
-% later version'', you have the option of following the terms and conditions
-% either of that version or of any later version published by the Free
-% Software Foundation.  If the Program does not specify a version number of
-% this License, you may choose any version ever published by the Free Software
-% Foundation.
-%
-% \item
-% If you wish to incorporate parts of the Program into other free
-% programs whose distribution conditions are different, write to the author
-% to ask for permission.  For software which is copyrighted by the Free
-% Software Foundation, write to the Free Software Foundation; we sometimes
-% make exceptions for this.  Our decision will be guided by the two goals
-% of preserving the free status of all derivatives of our free software and
-% of promoting the sharing and reuse of software generally.
-%
-% \begin{center}
-% {\Large\sc
-% No Warranty
-% }
-% \end{center}
-%
-% \item
-% {\sc Because the program is licensed free of charge, there is no warranty
-% for the program, to the extent permitted by applicable law.  Except when
-% otherwise stated in writing the copyright holders and/or other parties
-% provide the program ``as is'' without warranty of any kind, either expressed
-% or implied, including, but not limited to, the implied warranties of
-% merchantability and fitness for a particular purpose.  The entire risk as
-% to the quality and performance of the program is with you.  Should the
-% program prove defective, you assume the cost of all necessary servicing,
-% repair or correction.}
-%
-% \item
-% {\sc In no event unless required by applicable law or agreed to in writing
-% will any copyright holder, or any other party who may modify and/or
-% redistribute the program as permitted above, be liable to you for damages,
-% including any general, special, incidental or consequential damages arising
-% out of the use or inability to use the program (including but not limited
-% to loss of data or data being rendered inaccurate or losses sustained by
-% you or third parties or a failure of the program to operate with any other
-% programs), even if such holder or other party has been advised of the
-% possibility of such damages.}
-%
-% \end{enumerate}
-%
-%
-% \begin{center}
-% {\Large\sc End of Terms and Conditions}
-% \end{center}
-%
-%
-% \pagebreak[2]
-%
-% \section*{Appendix: How to Apply These Terms to Your New Programs}
-%
-% If you develop a new program, and you want it to be of the greatest
-% possible use to the public, the best way to achieve this is to make it
-% free software which everyone can redistribute and change under these
-% terms.
-%
-%   To do so, attach the following notices to the program.  It is safest to
-%   attach them to the start of each source file to most effectively convey
-%   the exclusion of warranty; and each file should have at least the
-%   ``copyright'' line and a pointer to where the full notice is found.
-%
-% \begin{quote}
-% one line to give the program's name and a brief idea of what it does. \\
-% Copyright (C) yyyy  name of author \\
-%
-% This program is free software; you can redistribute it and/or modify
-% it under the terms of the GNU General Public License as published by
-% the Free Software Foundation; either version 2 of the License, or
-% (at your option) any later version.
-%
-% This program is distributed in the hope that it will be useful,
-% but WITHOUT ANY WARRANTY; without even the implied warranty of
-% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-% GNU General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this program; if not, write to the Free Software
-% Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-% \end{quote}
-%
-% Also add information on how to contact you by electronic and paper mail.
-%
-% If the program is interactive, make it output a short notice like this
-% when it starts in an interactive mode:
-%
-% \begin{quote}
-% Gnomovision version 69, Copyright (C) yyyy  name of author \\
-% Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. \\
-% This is free software, and you are welcome to redistribute it
-% under certain conditions; type `show c' for details.
-% \end{quote}
-%
-%
-% The hypothetical commands {\tt show w} and {\tt show c} should show the
-% appropriate parts of the General Public License.  Of course, the commands
-% you use may be called something other than {\tt show w} and {\tt show c};
-% they could even be mouse-clicks or menu items---whatever suits your
-% program.
-%
-% You should also get your employer (if you work as a programmer) or your
-% school, if any, to sign a ``copyright disclaimer'' for the program, if
-% necessary.  Here is a sample; alter the names:
-%
-% \begin{quote}
-% Yoyodyne, Inc., hereby disclaims all copyright interest in the program \\
-% `Gnomovision' (which makes passes at compilers) written by James Hacker. \\
-%
-% signature of Ty Coon, 1 April 1989 \\
-% Ty Coon, President of Vice
-% \end{quote}
-%
-%
-% This General Public License does not permit incorporating your program
-% into proprietary programs.  If your program is a subroutine library, you
-% may consider it more useful to permit linking proprietary applications
-% with the library.  If this is what you want to do, use the GNU Library
-% General Public License instead of this License.
-%
-% \end{multicols}
-% \end{minipage}
-% \end{lrbox}
-%
-% \begin{center}
-% \scalebox{0.33}{\usebox{\gpl}}
-% \end{center}
-%
-% \Finale
-\endinput