% language=us runpath=texruns:manuals/lowlevel

\startcomponent lowlevel-alignments

\environment lowlevel-style

\startdocument
  [title=alignments,
   color=middlegreen]

\startsection[title=Introduction]

\TEX\ has a couple of subsystems and alignments is one of them. This mechanism is
used to construct tables or alike. Because alignments use low level primitives to
set up and construct a table, and because such a setup can be rather extensive, in
most cases users will rely on macros that hide this.

\startbuffer
\halign {
        \alignmark\hss \aligntab
    \hss\alignmark\hss \aligntab
    \hss\alignmark     \cr
    1.1     \aligntab 2,2     \aligntab 3=3     \cr
    11.11   \aligntab 22,22   \aligntab 33=33   \cr
    111.111 \aligntab 222,222 \aligntab 333=333 \cr
}
\stopbuffer

\typebuffer[option=TEX]

That one doesn't look too complex and comes out as:

\blank\getbuffer\blank

This is how the previous code comes out when we use one of the \CONTEXT\ table
mechanism.

\startbuffer
\starttabulate[|l|c|r|]
  \NC 1.1     \NC 2,2     \NC 3=3     \NC \NR
  \NC 11.11   \NC 22,22   \NC 33=33   \NC \NR
  \NC 111.111 \NC 222,222 \NC 333=333 \NC \NR
\stoptabulate
\stopbuffer

\typebuffer[option=TEX]

\blank\getbuffer\blank

That one looks a bit different with respect to spaces, so let's go back to the
low level variant:

\startbuffer
\halign {
        \alignmark\hss \aligntab
    \hss\alignmark\hss \aligntab
    \hss\alignmark     \cr
  1.1\aligntab     2,2\aligntab     3=3\cr
  11.11\aligntab   22,22\aligntab   33=33\cr
  111.111\aligntab 222,222\aligntab 333=333\cr
}
\stopbuffer

\typebuffer[option=TEX]

Here we don't have spaces in the content part and therefore also no spaces in the
result:

\blank\getbuffer\blank

You can automate dealing with unwanted spacing:

\startbuffer
\halign {
      \ignorespaces\alignmark\unskip\hss \aligntab
  \hss\ignorespaces\alignmark\unskip\hss \aligntab
  \hss\ignorespaces\alignmark\unskip     \cr
  1.1     \aligntab 2,2     \aligntab 3=3     \cr
  11.11   \aligntab 22,22   \aligntab 33=33   \cr
  111.111 \aligntab 222,222 \aligntab 333=333 \cr
}
\stopbuffer

\typebuffer[option=TEX]

We get:

\blank\getbuffer\blank

By moving the space skipping and cleanup to the so called preamble we don't need
to deal with it in the content part. We can also deal with inter|-|column spacing
there:

\startbuffer
\halign {
      \ignorespaces\alignmark\unskip\hss \tabskip 1em \aligntab
  \hss\ignorespaces\alignmark\unskip\hss \tabskip 1em \aligntab
  \hss\ignorespaces\alignmark\unskip     \tabskip 0pt \cr
  1.1     \aligntab 2,2     \aligntab 3=3     \cr
  11.11   \aligntab 22,22   \aligntab 33=33   \cr
  111.111 \aligntab 222,222 \aligntab 333=333 \cr
}
\stopbuffer

\typebuffer[option=TEX]

\blank\getbuffer\blank

If for the moment we forget about spanning columns (\type {\span}) and locally
ignoring preamble entries (\type {\omit}) these basic commands are not that
complex to deal with. Here we use \type {\alignmark} but that is just a primitive
that we use instead of \type {#} while \type {\aligntab} is the same as \type
{&}, but using the characters instead also assumes that they have the catcode
that relates to a parameter and alignment tab (and in \CONTEXT\ that is not the
case). The \TEX book has plenty alignment examples so if you really want to learn
about them, consult that must|-|have|-|book.

\stopsection

\startsection[title=Between the lines]

The individual rows of a horizontal alignment are treated as lines. This means that,
as we see in the previous section, the interline spacing is okay. However, that also
means that when we mix the lines with rules, the normal \TEX\ habits kick in. Take
this:

\startbuffer
\halign {
      \ignorespaces\alignmark\unskip\hss \tabskip 1em \aligntab
  \hss\ignorespaces\alignmark\unskip\hss \tabskip 1em \aligntab
  \hss\ignorespaces\alignmark\unskip     \tabskip 0pt \cr
  \noalign{\hrule}
  1.1     \aligntab 2,2     \aligntab 3=3     \cr
  \noalign{\hrule}
  11.11   \aligntab 22,22   \aligntab 33=33   \cr
  \noalign{\hrule}
  111.111 \aligntab 222,222 \aligntab 333=333 \cr
  \noalign{\hrule}
}
\stopbuffer

\typebuffer[option=TEX]

The result doesn't look pretty and actually, when you see documents produced by
\TEX\ using alignments you should not be surprised to notice rather ugly spacing.
The user (or the macropackage) should deal with that explicitly, and this is not
always the case.

\startlinecorrection
\getbuffer
\stoplinecorrection

The solution is often easy:

\startbuffer
\halign {
      \ignorespaces\strut\alignmark\unskip\hss \tabskip 1em \aligntab
  \hss\ignorespaces\strut\alignmark\unskip\hss \tabskip 1em \aligntab
  \hss\ignorespaces\strut\alignmark\unskip     \tabskip 0pt \cr
  \noalign{\hrule}
  1.1     \aligntab 2,2     \aligntab 3=3     \cr
  \noalign{\hrule}
  11.11   \aligntab 22,22   \aligntab 33=33   \cr
  \noalign{\hrule}
  111.111 \aligntab 222,222 \aligntab 333=333 \cr
  \noalign{\hrule}
}
\stopbuffer

\typebuffer[option=TEX]

\startlinecorrection
\getbuffer
\stoplinecorrection

The user will not notice it but alignments put some pressure on the general \TEX\
scanner. Actually, the scanner is either scanning an alignment or it expects
regular text (including math). When you look at the previous example you see
\type {\noalign}. When the preamble is read, \TEX\ will pick up rows till it
finds the final brace. Each row is added to a temporary list and the \type
{\noalign} will enter a mode where other stuff gets added to that list. It all
involves subtle look ahead but with minimal overhead. When the whole alignment is
collected a final pass over that list will package the cells and rows (lines) in
the appropriate way using information collected (like the maximum width of a cell
and width of the current cell. It will also deal with spanning cells then.

So let's summarize what happens:

\startitemize[n,packed]
\startitem
    scan the preamble that defines the cells (where the last one is repeated
    when needed)
\stopitem
\startitem
    check for \type {\cr}, \type {\noalign} or a right brace; when a row is
    entered scan for cells in parallel the preamble so that cell specifications
    can be applied (then start again)
\stopitem
\startitem
    package the preamble based on information with regards to the cells in
    a column
\stopitem
\startitem
    apply the preamble packaging information to the columns and also deal with
    pending cell spans
\stopitem
\startitem
    flush the result to the current list
\stopitem
\stopitemize

The second (repeated) step is complicated by the fact that the scanner has to
look ahead for a \type {\noalign}, \type {\cr}, \type {\omit} or \type {\span}
and when doing that it has to expand what comes. This can give side effects and
often results in obscure error messages. When for instance an \type {\if} is seen
and expanded, the wrong branch can be entered. And when you use protected macros
embedded alignment commands are not seen at all. Also, nesting \type {\noalign}
is not permitted.

All these side effects are to be handled in a macro package when it wraps
alignments in a high level interface and \CONTEXT\ does that for you. But because
the code doesn't always look pretty then, in \LUAMETATEX\ the alignment mechanism
has been extended a bit over time.

The first extension was to permit nested usage of \type {\noalign}. This has
resulted of a little reorganization of the code. A next extension showed up when
overload protection was introduced and extra prefixes were added. We can signal
the scanner that a macro is actually a \type {\noalign} variant: \footnote {A
better prefix would have been \type {\peekaligned} because in the meantime other
alignment primitives also can use this property.}

\starttyping[option=TEX]
\noaligned\protected\def\InBetween{\noalign{...}}
\stoptyping

This extension resulted in a second bit of reorganization (think of internal
command codes and such) but still the original processing of alignments was
there.

A third overhaul of the code actually did lead to some adaptations in the way
alignments are constructed so let's move on to that.

\stopsection

\startsection[title={Pre-, inter- and post-tab skips}]

The basic structure of a preamble and row is actually not that complex: it is
a mix of tab skip glue and cells (that are just boxes):

\startbuffer
\tabskip 10pt
\halign {
  \strut\alignmark\tabskip 12pt\aligntab
  \strut\alignmark\tabskip 14pt\aligntab
  \strut\alignmark\tabskip 16pt\cr
  \noalign{\hrule}
  cell 1.1\aligntab cell 1.2\aligntab cell 1.3\cr
  \noalign{\hrule}
  cell 2.1\aligntab cell 2.2\aligntab cell 2.3\cr
  \noalign{\hrule}
}
\stopbuffer

\typebuffer[option=TEX]

The tab skips are set in advance and apply to the next cell (or after the last
one).

\startbuffer[blownup-1]
\startlinecorrection
{\showmakeup[glue]\scale[width=\textwidth]{\vbox{\getbuffer}}}
\stoplinecorrection
\stopbuffer

\getbuffer[blownup-1]

% \normalizelinemode \zerocount % \discardzerotabskipsnormalizecode

In the \CONTEXT\ table mechanisms the value of \type {\tabskip} is zero
in most cases. As in:

\startbuffer
\tabskip 0pt
\halign {
  \strut\alignmark\aligntab
  \strut\alignmark\aligntab
  \strut\alignmark\cr
  \noalign{\hrule}
  cell 1.1\aligntab cell 1.2\aligntab cell 1.3\cr
  \noalign{\hrule}
  cell 2.1\aligntab cell 2.2\aligntab cell 2.3\cr
  \noalign{\hrule}
}
\stopbuffer

\typebuffer[option=TEX]

When these ships are zero, they still show up in the end:

\getbuffer[blownup-1]

Normally, in order to achieve certain effects there will be more align entries in
the preamble than cells in the table, for instance because you want vertical
lines between cells. When these are not used, you can get quite a bit of empty
boxes and zero skips. Now, of course this is seldom a problem, but when you have
a test document where you want to show font properties in a table and that font
supports a script with some ten thousand glyphs, you can imagine that it
accumulates and in \LUATEX\ (and \LUAMETATEX) nodes are larger so it is one of
these cases where in \CONTEXT\ we get messages on the console that node memory is
bumped.

After playing a bit with stripping zero tab skips I found that the code would not
really benefit from such a feature: lots of extra tests made if quite ugly. As a
result a first alternative was to just strip zero skips before an alignment got
flushed. At least we're then a bit leaner in the processes that come after it.
This feature is now available as one of the normalizer bits.

But, as we moved on, a more natural approach was to keep the skips in the
preamble, because that is where a guaranteed alternating skip|/|box is assumed.
It also makes that the original documentation is still valid. However, in the
rows construction we can be lean. This is driven by a keyword to \type {\halign}:

\startbuffer
\tabskip 0pt
\halign noskips {
  \strut\alignmark\aligntab
  \strut\alignmark\aligntab
  \strut\alignmark\cr
  \noalign{\hrule}
  cell 1.1\aligntab cell 1.2\aligntab cell 1.3\cr
  \noalign{\hrule}
  cell 2.1\aligntab cell 2.2\aligntab cell 2.3\cr
  \noalign{\hrule}
}
\stopbuffer

\typebuffer[option=TEX]

No zero tab skips show up here:

\getbuffer[blownup-1]

When playing with all this the \LUAMETATEX\ engine also got a tracing option for
alignments. We already had one that showed some of the \type{\noalign} side
effects, but showing the preamble was not yet there. This is what \typ
{\tracingalignments = 2} results in:

% {\tracingalignments2 \setbox0\vbox{\getbuffer}}

\starttyping[option=TEX]
<preamble>
\glue[ignored][...] 0.0pt
\alignrecord
..{\strut }
..<content>
..{\endtemplate }
\glue[ignored][...] 0.0pt
\alignrecord
..{\strut }
..<content>
..{\endtemplate }
\glue[ignored][...] 0.0pt
\alignrecord
..{\strut }
..<content>
..{\endtemplate }
\glue[ignored][...] 0.0pt
\stoptyping

The \type {ignored} subtype is (currently) only used for these alignment tab
skips and it triggers a check later on when the rows are constructed. The \type
{<content>} is what get injected in the cell (represented by \type {\alignmark}).
The pseudo primitives are internal and not public.

\stopsection

\startsection[title={Cell widths}]

Imagine this:

\startbuffer
\halign {
  x\hbox to 3cm{\strut    \alignmark\hss}\aligntab
  x\hbox to 3cm{\strut\hss\alignmark\hss}\aligntab
  x\hbox to 3cm{\strut\hss\alignmark    }\cr
  cell 1.1\aligntab cell 1.2\aligntab cell 1.3\cr
  cell 2.1\aligntab cell 2.2\aligntab cell 2.3\cr
}
\stopbuffer

\typebuffer[option=TEX]

which renders as:

\startbuffer[blownup-2]
\startlinecorrection
{\showboxes\scale[width=\textwidth]{\vbox{\getbuffer}}}
\stoplinecorrection
\stopbuffer

{\showboxes\getbuffer[blownup-2]}

A reason to have boxes here is that it enforces a cell width but that is done at
the cost of an extra wrapper. In \LUAMETATEX\ the \type {hlist} nodes are rather
large because we have more options than in original \TEX, for instance offsets
and orientation. So, in a table with 10K rows of 4 cells yet get 40K extra \type
{hlist} nodes allocated. Now, one can argue that we have plenty of memory but
being lazy is not really a sign of proper programming.

\startbuffer
\halign {
  x\tabsize 3cm\strut    \alignmark\hss\aligntab
  x\tabsize 3cm\strut\hss\alignmark\aligntab
  x\tabsize 3cm\strut\hss\alignmark\hss\cr
  cell 1.1\aligntab cell 1.2\aligntab cell 1.3\cr
  cell 2.1\aligntab cell 2.2\aligntab cell 2.3\cr
}
\stopbuffer

\typebuffer[option=TEX]

If you look carefully you will see that this time we don't have the embedded
boxes:

{\showboxes\getbuffer[blownup-2]}

So, both the sparse skip and new \type {\tabsize} feature help to make these
extreme tables (spanning hundreds of pages) not consume irrelevant memory and
also make that later on we don't have to consult useless nodes.

\stopsection

\startsection[title=Plugins]

Yet another \LUAMETATEX\ extension is a callback that kicks in between the
preamble preroll and finalizing the alignment. Initially as test and
demonstration a basic character alignment feature was written but that works so
well that in some places it can replace (or compliment) the already existing
features in the \CONTEXT\ table mechanisms.

\startbuffer
\starttabulate[|lG{.}|cG{,}|rG{=}|cG{x}|]
\NC 1.1     \NC 2,2     \NC 3=3     \NC a 0xFF   \NC \NR
\NC 11.11   \NC 22,22   \NC 33=33   \NC b 0xFFF  \NC \NR
\NC 111.111 \NC 222,222 \NC 333=333 \NC c 0xFFFF \NC \NR
\stoptabulate
\stopbuffer

\typebuffer[option=TEX]

The tabulate mechanism in \CONTEXT\ is rather old and stable and it is the
preferred way to deal with tabular content in the text flow. However, adding the
\type {G} specifier (as variant of the \type {g} one) could be done without
interference or drop in performance. This new \type {G} specifier tells the
tabulate mechanism that in that column the given character is used to vertically
align the content that has this character.

\blank\getbuffer\blank

Let's make clear that this is {\em not} an engine feature but a \CONTEXT\ one. It
is however made easy by this callback mechanism. We can of course use this feature
with the low level alignment primitives, assuming that you tell the machinery that
the plugin is to be kicked in.

\startbuffer
\halign noskips \alignmentcharactertrigger \bgroup
    \tabskip2em
        \setalignmentcharacter.\ignorespaces\alignmark\unskip\hss \aligntab
    \hss\setalignmentcharacter,\ignorespaces\alignmark\unskip\hss \aligntab
    \hss\setalignmentcharacter=\ignorespaces\alignmark\unskip     \aligntab
    \hss                       \ignorespaces\alignmark\unskip\hss \cr
      1.1   \aligntab   2,2   \aligntab   3=3   \aligntab \setalignmentcharacter{.}\relax 4.4\cr
     11.11  \aligntab  22,22  \aligntab  33=33  \aligntab \setalignmentcharacter{,}\relax 44,44\cr
    111.111 \aligntab 222,222 \aligntab 333=333 \aligntab \setalignmentcharacter{!}\relax 444!444\cr
        x   \aligntab     x   \aligntab     x   \aligntab \setalignmentcharacter{/}\relax /\cr
       .1   \aligntab    ,2   \aligntab    =3   \aligntab \setalignmentcharacter{?}\relax ?4\cr
       .111 \aligntab    ,222 \aligntab    =333 \aligntab \setalignmentcharacter{=}\relax 44=444\cr
\egroup
\stopbuffer

{\switchtobodyfont[8pt] \typebuffer[option=TEX]}

This rather verbose setup renders as:

\blank\getbuffer\blank

Using a high level interface makes sense but local control over such alignment too, so
here follow some more examples. Here we use different alignment characters:

\startbuffer
\starttabulate[|lG{.}|cG{,}|rG{=}|cG{x}|]
\NC 1.1     \NC 2,2     \NC 3=3     \NC a 0xFF   \NC \NR
\NC 11.11   \NC 22,22   \NC 33=33   \NC b 0xFFF  \NC \NR
\NC 111.111 \NC 222,222 \NC 333=333 \NC c 0xFFFF \NC \NR
\stoptabulate
\stopbuffer

\typebuffer[option=TEX] \getbuffer

In this example we specify the characters in the cells. We still need to add a
specifier in the preamble definition because that will trigger the plugin.

\startbuffer
\starttabulate[|lG{}|lG{}|]
\NC \showglyphs \setalignmentcharacter{.}1.1     \NC \setalignmentcharacter{.}1.1     \NC\NR
\NC \showglyphs \setalignmentcharacter{,}11,11   \NC \setalignmentcharacter{,}11,11   \NC\NR
\NC \showglyphs \setalignmentcharacter{=}111=111 \NC \setalignmentcharacter{=}111=111 \NC\NR
\stoptabulate
\stopbuffer

{\switchtobodyfont[8pt] \typebuffer[option=TEX]} \getbuffer

You can mix these approaches:

\startbuffer
\starttabulate[|lG{.}|lG{}|]
\NC 1.1     \NC \setalignmentcharacter{.}1.1     \NC\NR
\NC 11.11   \NC \setalignmentcharacter{.}11.11   \NC\NR
\NC 111.111 \NC \setalignmentcharacter{.}111.111 \NC\NR
\stoptabulate
\stopbuffer

\typebuffer[option=TEX] \getbuffer

Here the already present alignment feature, that at some point in tabulate might
use this new feature, is meant for numbers, but here we can go wild with words,
although of course you need to keep in mind that we deal with typeset text, so
there may be no match.

\startbuffer
\starttabulate[|lG{.}|rG{.}|]
\NC foo.bar \NC foo.bar \NC \NR
\NC  oo.ba  \NC  oo.ba  \NC \NR
\NC   o.b   \NC   o.b   \NC \NR
\stoptabulate
\stopbuffer

\typebuffer[option=TEX] \getbuffer

This feature will only be used in know situations and those seldom involve advanced
typesetting. However, the following does work: \footnote {Should this be an option
instead?}

\startbuffer
\starttabulate[|cG{d}|]
\NC \smallcaps abcdefgh \NC \NR
\NC              xdy    \NC \NR
\NC \sl          xdy    \NC \NR
\NC \tttf        xdy    \NC \NR
\NC \tfd          d     \NC \NR
\stoptabulate
\stopbuffer

\typebuffer[option=TEX] \getbuffer

As always with such mechanisms, the question is \quotation {Where to stop?} But it
makes for nice demos and as long as little code is needed it doesn't hurt.

\stopsection

\startsection[title=Pitfalls and tricks]

The next example mixes bidirectional typesetting. It might look weird at first
sight but the result conforms to what we discussed in previous paragraphs.

\startbuffer
\starttabulate[|lG{.}|lG{}|]
\NC \righttoleft 1.1   \NC \righttoleft \setalignmentcharacter{.}1.1   \NC\NR
\NC              1.1   \NC              \setalignmentcharacter{.}1.1   \NC\NR
\NC \righttoleft 1.11  \NC \righttoleft \setalignmentcharacter{.}1.11  \NC\NR
\NC              1.11  \NC              \setalignmentcharacter{.}1.11  \NC\NR
\NC \righttoleft 1.111 \NC \righttoleft \setalignmentcharacter{.}1.111 \NC\NR
\NC              1.111 \NC              \setalignmentcharacter{.}1.111 \NC\NR
\stoptabulate
\stopbuffer

{\switchtobodyfont[8pt] \typebuffer[option=TEX]} \getbuffer

In case of doubt, look at this:

\startbuffer
\starttabulate[|lG{.}|lG{}|lG{.}|lG{}|]
\NC \righttoleft 1.1   \NC \righttoleft \setalignmentcharacter{.}1.1   \NC
                 1.1   \NC              \setalignmentcharacter{.}1.1   \NC\NR
\NC \righttoleft 1.11  \NC \righttoleft \setalignmentcharacter{.}1.11  \NC
                 1.11  \NC              \setalignmentcharacter{.}1.11  \NC\NR
\NC \righttoleft 1.111 \NC \righttoleft \setalignmentcharacter{.}1.111 \NC
                 1.111 \NC              \setalignmentcharacter{.}1.111 \NC\NR
\stoptabulate
\stopbuffer

{\switchtobodyfont[8pt] \typebuffer[option=TEX]} \getbuffer

The next example shows the effect of \type {\omit} and \type {\span}. The first one
makes that in this cell the preamble template is ignored.

\startbuffer
\halign \bgroup
    \tabsize 2cm\relax     [\alignmark]\hss \aligntab
    \tabsize 2cm\relax \hss[\alignmark]\hss \aligntab
    \tabsize 2cm\relax \hss[\alignmark]\cr
           1\aligntab       2\aligntab       3\cr
     \omit 1\aligntab \omit 2\aligntab \omit 3\cr
           1\aligntab       2\span           3\cr
           1\span           2\aligntab       3\cr
           1\span           2\span           3\cr
           1\span \omit     2\span \omit     3\cr
     \omit 1\span \omit     2\span \omit     3\cr
\egroup
\stopbuffer

\typebuffer[option=TEX]

Spans are applied at the end so you see a mix of templates applied.

{\showboxes\getbuffer[blownup-2]}

When you define an alignment inside a macro, you need to duplicate the \type {\alignmark}
signals. This is similar to embedded macro definitions. But in \LUAMETATEX\ we can get
around that by using \type {\aligncontent}. Keep in mind that when the preamble is scanned there
is no doesn't expand with the exception of the token after \type {\span}.

\startbuffer
\halign \bgroup
    \tabsize 2cm\relax     \aligncontent\hss \aligntab
    \tabsize 2cm\relax \hss\aligncontent\hss \aligntab
    \tabsize 2cm\relax \hss\aligncontent\cr
    1\aligntab 2\aligntab 3\cr
    A\aligntab B\aligntab C\cr
\egroup
\stopbuffer

\typebuffer[option=TEX]

\blank\getbuffer\blank

In this example we still have to be verbose in the way we align but we can do this:

\startbuffer
\halign \bgroup
    \tabsize 2cm\relax \aligncontentleft  \aligntab
    \tabsize 2cm\relax \aligncontentmiddle\aligntab
    \tabsize 2cm\relax \aligncontentright \cr
    1\aligntab 2\aligntab 3\cr
    A\aligntab B\aligntab C\cr
\egroup
\stopbuffer

\typebuffer[option=TEX]

Where the helpers are defined as:

\starttyping[option=TEX]
\noaligned\protected\def\aligncontentleft
  {\ignorespaces\aligncontent\unskip\hss}

\noaligned\protected\def\aligncontentmiddle
  {\hss\ignorespaces\aligncontent\unskip\hss}

\noaligned\protected\def\aligncontentright
  {\hss\ignorespaces\aligncontent\unskip}
\stoptyping

The preamble scanner see such macros as candidates for a single level expansion
so it will inject the meaning and see the \type {\aligncontent} eventually.

\blank\getbuffer\blank

The same effect could be achieved by using the \type {\span} prefix:

\starttyping[option=TEX]
\def\aligncontentleft{\ignorespaces\aligncontent\unskip\hss}

\halign { ... \span\aligncontentleft ...}
\stoptyping

One of the reasons for not directly using the low level \type {\halign} command is
that it's a lot of work but by providing a set of helpers like here might change
that a bit. Keep in mind that much of the above is not new in the sense that we
could not achieve the same already, it's just a bit programmer friendly.

\stopsection

\startsection[title=Remark]

It can be that the way alignments are interfaced with respect to attributes is a bit
different between \LUATEX\ and \LUAMETATEX\ but because the former is frozen (in
order not to interfere with current usage patterns) this is something that we will
deal with deep down in \CONTEXT\ \LMTX.

In principle we can have hooks into the rows for pre and post material but it
doesn't really pay of as grouping will still interfere. So for now I decided not
to add these.

\stopsection

\stopdocument

% \hbox \bgroup
%     \vbox \bgroup \halign \bgroup
%         \hss\aligncontent\hss\aligntab
%         \hss\aligncontent\hss\cr
%         aaaa\aligntab bbbb\cr
%         aaa\aligntab bbb\cr
%         aa\aligntab bb\cr
%         a\aligntab b\cr
%         \omit\span \hss ccc\hss\cr
%     \egroup \egroup
%     \quad
%     \vbox \bgroup \halign noskips \bgroup
%         \hss\aligncontent\hss\aligntab
%         \hss\aligncontent\hss\cr
%         aaaa\aligntab bbbb\cr
%         aaa\aligntab bbb\cr
%         aa\aligntab bb\cr
%         a\aligntab b\cr
%         \omit\span \hss ccc\hss\cr
%     \egroup \egroup
% \egroup
