From 0caec226a633182402b349c3ac5b3bf9e0bc76c2 Mon Sep 17 00:00:00 2001 From: Hans Hagen Date: Sun, 15 Jan 2023 14:50:04 +0100 Subject: 2023-01-15 13:55:00 --- .../general/manuals/lowlevel/lowlevel-boxes.tex | 12 + .../sources/general/manuals/math/math-notdone.tex | 23 +- .../general/manuals/musings/musings-speed.tex | 687 +++++++++++++++++++++ .../sources/general/manuals/musings/musings.tex | 1 + 4 files changed, 715 insertions(+), 8 deletions(-) create mode 100644 doc/context/sources/general/manuals/musings/musings-speed.tex (limited to 'doc/context') diff --git a/doc/context/sources/general/manuals/lowlevel/lowlevel-boxes.tex b/doc/context/sources/general/manuals/lowlevel/lowlevel-boxes.tex index 550e06819..e2e34bd20 100644 --- a/doc/context/sources/general/manuals/lowlevel/lowlevel-boxes.tex +++ b/doc/context/sources/general/manuals/lowlevel/lowlevel-boxes.tex @@ -897,3 +897,15 @@ that users will find reasons to abuse this effect. % % test \par \box0 \par \box2 \par test + +\setbox0\vbox +{ + \setbox \scratchbox \hbox{XXX} + \boxvadjust\scratchbox pre {BBB} + \boxvadjust\scratchbox post {AAA} +% \dontleavehmode % needed + \box\scratchbox +% \unhbox\scratchbox +} + +111111\par \box0 \par 222222\par diff --git a/doc/context/sources/general/manuals/math/math-notdone.tex b/doc/context/sources/general/manuals/math/math-notdone.tex index 757cebbe2..9cb5c8027 100644 --- a/doc/context/sources/general/manuals/math/math-notdone.tex +++ b/doc/context/sources/general/manuals/math/math-notdone.tex @@ -9,7 +9,7 @@ \startchapter[title=Why we don't do this] The \TEX\ engine has two math modes: inline and display. What exactly happens -before we do that depends on what mode we are in. +before we enter math depends on what mode we are in. \startitemize \startitem @@ -25,7 +25,7 @@ before we do that depends on what mode we are in. indentation and everything that \type {\everypar} likes to inject. Inline math then stays inline but display math starts out with flushing the current paragraph and that happens to be the state, indentation and - everything else injected at the beginning. Often nothing is sees, just + everything else injected at the beginning. Often nothing is seen, just an empty line sits there. \stopitem \startitem @@ -35,7 +35,7 @@ before we do that depends on what mode we are in. \stopitemize Especially the second case is tricky. The \quote {empty} line is placed with -proper \type {\parskip}, \type {\parindent} and whatever. That can end up with a +proper \typ {\parskip}, \typ {\parindent} and whatever. That can end up with a lot of supposedly whitespace of which is not really clear (for the user) what comes from where: interline space, whitespace, line height, display spacing, etc. To that you can add that empty lines are special themselves: in \MKII\ we relax @@ -43,8 +43,8 @@ To that you can add that empty lines are special themselves: in \MKII\ we relax \LUAMETATEX\ has no checks at all. \footnote {The same can be told about \type {\outer}.} -Before We show some examples of this we have to make clear that \CONTEXT\ users -don't do this have to worry about all this. We don't follow the (Plain and +Before we show some examples of this we have to make clear that \CONTEXT\ users +don't have to worry about all this. We don't follow the (Plain and \LATEX) \AMS\ policy of \quotation {no empty lines before display math} and \quotation {no empty lines in display math}. We don't even use the display skip parameters and we do compensate for these empty line issues. The basics haven't @@ -112,9 +112,9 @@ make sure that we operate in regular \TEX\ mode, the way other macro packages do First we show what we get with \typ {\mathdisplayskipmode 1}. This makes the engine behave like other engines. We don't show what we get with \typ -{\mathdisplayskipmode 2} where zero skips are ignored but we don't have these -here. Last we show what we get with \typ {\mathdisplayskipmode 3}. In this -example the math specific skips are completely ignored. +{\mathdisplayskipmode 2} where zero skips are ignored but we don't have these. +Last we show what we get with \typ {\mathdisplayskipmode 3}. Here the math +specific skips are completely ignored. In both shown cases you will notice that the \type {\parskip} and \type {\baselineskip} interfere which in turn demonstrates why in \CONTEXT\ we always @@ -134,6 +134,13 @@ macro packages will use it no time will be wasted on this. {\mathdisplayskipmode 1 \getbuffer} {\mathdisplayskipmode 3 \getbuffer} + +% \mathdisplaymode 0 +% before \par $$ \vadjust {\bf post 1} \vadjust {\bf post 2} x_2 \vadjust pre {\bf pre} $$ \par after \blank[3*line] +% before \par $$ \vadjust {\bf post 1} \vadjust {\bf post 2} x_2 \vadjust pre {\bf pre} $$ \par after \blank[3*line] +% before \par $ \vadjust {\bf post 1} \vadjust {\bf post 2} x_3 \vadjust pre {\bf pre} $ \par after \blank[3*line] +% before \par $\displaystyle \vadjust {\bf post 1} \vadjust {\bf post 2} x_3 \vadjust pre {\bf pre} $ \par after \blank[3*line] + \stopchapter \stopcomponent diff --git a/doc/context/sources/general/manuals/musings/musings-speed.tex b/doc/context/sources/general/manuals/musings/musings-speed.tex new file mode 100644 index 000000000..ecf6d220b --- /dev/null +++ b/doc/context/sources/general/manuals/musings/musings-speed.tex @@ -0,0 +1,687 @@ +% language=us runpath=texruns:manuals/musings + +% musical timestamp: listening to FLUX (jazz trio) in Januari 2023 + +\startcomponent musings-speed + +\environment musings-style + +\startchapter[title={Speeding up \TEX}] + +\startsection[title={Introduction}] + +Recently a couple of cordless phones that I use gave up as soon as I used them +for a minute or so. The first time that happened I figured that after all these +years the batteries had gone bad and after some testing I decided to replace +them. I got some of these high end batteries that discharge slowly and store a +lot of power. Within a year they were dead too. Then I went for the more regular +and cheaper ones, again with a lot of capacity. And yes, these also gave up, that +is: only in the phones that were hardly used. The batteries lasted longer in +phones that were discharged by usage daily. + +When I went out for new batteries I was asked if I needed them for cordless +phones and, surprise, was given special ones that actually stored less but were +guaranteed to work for at least 6 years. The package explicitly mentioned use in +cordless phones. So here performance doesn't come with the most high end ones, +based on specifications that impress. + +This is also true for computers that are used to process \TEX\ documents. More +cores amount to much accumulated processing power but for a single core \TEX\ +process, a few fast cores are more relevant than plenty slower ones that run in +parallel. More memory helps but compared to other processes \TEX\ actually +doesn't use that much memory. And disk speed matters but less so when the +operating system caches files. What does play a role are cpu caches because \TEX\ +is very memory intense and processing is not concentrated in a few functions. But +a large cache shared among many (busy) cores makes for a less impressive +performance. + +So what matters really? In the next sections we will explore a few points of +view. It's not some advertisement for a specific engine, but much more about +putting it into perspective (as one can run into ridiculous arguments on the +web). It is not only the hardware and software that matters but also how one uses +it. + +\stopsection + +\startsection[title=The engine] + +There are various ways to compare engines and each has its own characteristics. +The \PDFTEX\ engine is closest to the original. It directly produces the output +which can give it an edge. It is eight bit and therefore uses small fonts and +internally all that is related to fonts and characters is also small. This means +that there is little overhead in typesetting a paragraph: hyphenation, ligature +building and kerning are interwoven and perform well. + +The \XETEX\ engine supports wide fonts and \UNICODE\ and therefore can be seen as +32 bit. I never looked into the code so I can't tell how far that goes but +performance is definitely less than \PDFTEX. The rendering of text is delegated +to a library (there were some changes in that along its development) which is +less efficient than the built in \PDFTEX\ route. But it is also more powerful. + +The \LUATEX\ engine is mostly 32 bit and delegates non standard font handling to +\LUA\ which comes with a performance penalty but also adds a lot of flexibility. +Also, the fact that one can call out to \LUA\ in many places makes that one can +not really blame the engine for performance hits. The fact that hyphenation, +ligature building and kerning is split comes at a small price too. We have larger +nodes so compared to \PDFTEX\ more memory is used and accessed. Some mechanisms +are actually more efficient, like font expansion and protrusion. + +The \LUAMETATEX\ engine lacks a font loader (but it does have the traditional +renderer on board) and it has no backend. So even more is delegated to \LUA, +which in turn makes this the slowest of the lot. And, again more data travels +with nodes. In some modes of operation much more calculations take place. +However, because it has an enriched macro processor, additional primitives, and +plenty deep down \quote {improvements} it can perform better than \LUATEX\ (and +even \LUAJITTEX, the \LUATEX\ version with a faster but limited \LUA\ virtual +machine). And as with \LUATEX, there are usage patterns that make it faster than +\PDFTEX. + +So, in general the order of performance is \PDFTEX, \XETEX, \LUAJITTEX\ (kind of +obsolete), \LUATEX, \LUAMETATEX. But then, how come that \CONTEXT\ users never +complain about performance? The reasons is simple: performance is quite okay and +as it is relative to what one does, a user will accept a drop in performance when +more has to be done. When we moved on from \LUATEX\ to \LUAMETATEX\ there +definitely was a drop in performance, simply because of the \LUA\ backend. +Because upgrading happened in small (but continuous) steps, right from the start +the new engine was good enough to be used in production which is why most users +switched to \LMTX\ as soon as became clear that this is where the progress is +made. + +There were no real complaints about the upto 15\percent\ initial performance drop +which indicates that for most users it doesn't matter that much. As the engine +evolved we could gain some back and now \LUAMETATEX\ ends up between \PDFTEX\ and +\LUATEX\ and in many modern scenarios even comes out first. The fact that in the +meantime we can be much faster than \LUATEX\ did get noticed (when asked). +However, as development takes years updating a machine in the meantime puts +discussions about performance in a different (causality) perspective anyway. + +\stopsection + +\startsection[title=The coding] + +Performance can increase when native engine features are used instead of complex +macros that have to work around limitations. It can also decrease when new +features are used that add complex functionality. And when an engine extends +existing functionality that is likely to come at a price. So where \LUAMETATEX\ +provides a more rich programming environment, it also had a more complex par +builder, page builder, insert, mark and adjust handling, plenty of extra +character, rule and box features and all of that definitely adds some overhead. +Quite often a gain in simplicity (nicer and more efficient macros) compensate the +more complex features. That is because on the average the engine doesn't do that +much (tens of thousands of the same) complex macro expansion and also doesn't +demand that much complex low level typesetting. A gain here is often compensated +by a loss there. This is one reason why during the years \LUAMETATEX\ could +sustain a decent performance. Personally I don't accept a drop in performance +easily which is why in practice most mechanism, even when extended, probably +perform better but I'm not going to prove that observation. + +One important reason why \CONTEXT\ \LMTX\ with \LUAMETATEX\ is faster than its +ancestors is that we got rid of some intermediate programming layers. Most users +have never seen the auxiliary macros or implementation details but plenty were +used in \MKII\ and \MKIV. Of course we kept them because often they are nicer +than many lines of primitive code, but only a few (and less in the future) are +used in the core. Examples are multi step macros (that pick up arguments) that +became single step and complex if tests that became inline native tests. Because +\CONTEXT\ always had a high level of abstraction consistency of the interface +also makes that we don't need many helpers. When some features (like for instance +box manipulation) got extended one could expect a performance hit due to more +extensive optional keyword scanning in the engine but that was compensated by +improved scanners. The same is true for scanning numbers and dimensions. So, more +functionality doesn't always come at a price. + +To summarize this: although the engine went a bit more \quote {cisc} than \type +{risc} the macro package went more \quote {risc}. It reminds me a bit of the end +of the previous century when there was much talk of fourth generation languages, +something on top of the normal languages. In the end it were scripting languages +that became the fashion while traditional languages like \CCODE\ remained +relatively stable and unchanged for implementing them (and more). A similar +observation can be made for \CONTEXT\ itself. Whenever some new feature gets +added to an existing mechanism I try to not cripple performance and thanks to the +way \CONTEXT\ is set up it works out okay. + +Let's look at an example. In \MKII\ we can compare two \quote {strings} with the +macro \type {doifelse}. Its definition is as follows: + +\starttyping +\long\def\doifelse#1#2% + {\let\donottest\dontprocesstest + \edef\!!stringa{#1}% + \edef\!!stringb{#2}% + \let\donottest\doprocesstest + \ifx\!!stringa\!!stringb + \expandafter\firstoftwoarguments + \else + \expandafter\secondoftwoarguments + \fi} +\stoptyping + +This macro takes two arguments that gets expanded inside two helpers that we +then compare with a primitive \type {\ifx}. Depending on the outcome we +expand one of the two following arguments but first we get rid of the interfering +\type {\else} and \type {\fi}. The pushing and popping of \type {\donottest} takes +care of protection of unwanted expansion in an \type {\edef}. Many functional macros +are what we call protected: then expand in two steps depending on the embedded +\type {\donottest} macro. Think of (simplified): + +\starttyping +\def\realfoo{something is done here} +\def\usedfoo{\donottest\realfoo} +\stoptyping + +Normally \type {\donottest} is doing nothing so \type {\realfoo} gets expanded +but there are cases where we (for instance) \type {\let} it be \type {\string} +which then serializes the macro. This is something that happens when writing to +the multi pass data file. It can also be used for overloading, for instance in +the backend or when converting something. This protection against expansion has +always been a \CONTEXT\ feature, which in turn made it pretty robust in multi +pass scenarios, but it definitely came with performance penalty. + +When \PDFTEX\ got the \ETEX\ extensions we could use the \type {\protected} +prefix to replace this trickery. That means that \MKII\ will use a different +definition of \type {\doifelse} when that primitive is known: + +\starttyping +\long\def\doifelse#1#2% + {\edef\!!stringa{#1}% + \edef\!!stringb{#2}% + \ifx\!!stringa\!!stringb + \expandafter\firstoftwoarguments + \else + \expandafter\secondoftwoarguments + \fi} +\stoptyping + +This works okay because we now do this: + +\starttyping +\protected\def\usedfoo{something is done here} +\stoptyping + +The \type {\doifelse} helper itself is not protected in \MKII\ (non \ETEX\ mode) +It would be a performance hit. I won't bore the reader with the tricks needed to +do the opposite, that is: expand a protected macro. It is seldom needed anyway. + +The \MKIV\ definition used with \LUATEX\ is not much different, only the \type +{\long} prefix is missing. That one is needed when one wants \type {#1} and|/|or +\type {#2} to be tolerant with respect to embedded \type {\par} equivalents. In +\LUAMETATEX\ we can disable that check and in \CONTEXT\ all macros are thereby +\type {\long}. Users won't notice because in \CONTEXT\ most macros were always +defined the long way; we also suppress \type {\outer} errors. + +\starttyping +\protected\def\doifelse#1#2% + {\edef\m_syst_string_one{#1}% + \edef\m_syst_string_two{#2}% + \ifx\m_syst_string_one\m_syst_string_two + \expandafter\firstoftwoarguments + \else + \expandafter\secondoftwoarguments + \fi} +\stoptyping + +Implementation wise a macro, once scanned and stored, carries the long property +in its command code so that has overhead. However because \LUATEX\ is compatible +we cannot make all normal macros long by default when \type {\suppresslongerror} +is used. Therefore checking for an argument running into a \type {\par} is still +checked but the message is suppressed based on the setting of the mentioned +parameter. Performance wise, not using \type {\long} comes a the cost of checking +a parameter which means an additional memory access and comparison. Unless we +otherwise gain something in the engine it comes at a cost. In \LUAMETATEX\ the +\type {\long} and \type {\outer} prefixes are ignored. Even better, protected +macros are also implemented a bit more efficiently. + +In the end the definition of \type {\doifelse} in \LMTX\ looks a bit different: + +\starttyping +\permanent\protected\def\doifelse#1#2% + {\iftok{#1}{#2}% + \expandafter\firstoftwoarguments + \else + \expandafter\secondoftwoarguments + \fi} +\stoptyping + +The \typ {\permanent} prefix flags this macro as such. Depending on the value of +\typ {\overloadmode} a redefinition is permitted, comes with a warning or +results in a fatal error. Of course this comes at a price when we define macros +or values of quantities but this is rather well compensated by all kind of +improvements in handling macros: defining, expansion, saving and restoring, etc. + +More interesting is the use of \type {\iftok} here. It saves us defining two +helper macros. Of course the content still needs to be expanded before comparison +but we no longer have various macro management overhead. In scenarios where we +don't need to jump over the \type {\else} or \type {\fi} we can use this test in +place which saves passing two arguments and grabbing one argument later on. +Actually, grabbing is also different, compare: + +\starttyping + \def\firstoftwoarguments #1#2{#1} % MkII and MkIV +\permanent\def\firstoftwoarguments #1#-{#1} % MkXL aka LMTX + + \def\secondoftwoarguments#1#2{#1} % MkII and MkIV +\permanent\def\secondoftwoarguments#-#1{#1} % MkXL aka LMTX +\stoptyping + +In the case of \LUAMETATEX\ the \type {#-} makes that we don't even bother to +store the argument as it is ignored. Where \type {#0} does the same it also +increments the argument counter which is why here even the second arguments has +number ~1. Now, if this more efficient? Sure, but how often does it really +happen? The engine still needs to scan (which comes at a cost) but we save on +temporary token list storage. Because \TEX\ is so fast already, measuring only +shows differences when one has many (and here a real lot) iterations. However, +all these small bits add up which is what we've seen in 2022 in \CONTEXT: it is +the reason why we are now faster than \MKIV\ with \LUATEX, even with more +functionality in the engine. + +I can probably write hundreds of pages in explaining what was added, changed, +made more flexible and what side effects it had|/|has on performance but I bet no +one is really interested in that. In fact, the previous exploration is just a +side effect of a question that triggered it, so maybe future questions will +trigger more explanations. It anyhow demonstrates what I meant when I said that +\LUAMETATEX\ is meant to be leaner and meaner. Of course the code base and binary +is smaller but that also gets compensated by more functionality. It also means +that we can make the \CONTEXT\ code base nicer because for me a good looking +source (which of course is subjective) is pretty important. + +\stopsection + +\startsection[title=Compatibility] + +There are non \CONTEXT\ users who seem to love to stress that successive versions +of \CONTEXT\ are incompatible. Other claims are that it is developed in a +commercial setting. While it is true that there are changes and it is also true +that \CONTEXT\ is used in commercial settings, it is not that different from +other open source projects. The majority of the code is written without +compensation and it is offered without advertisements or request for support. It +is true that when we can render better, it will be done. But the user interfaces +only change when there is a reason and there are few cases where some +functionality became obsolete, think of input and font encodings. Most such +changes directly relate to the engine: in \PDFTEX\ and \MKII\ we emulate \UTF-8\ +wile in \LUATEX\ is comes natively. In \PDFTEX\ eight bit (\TYPEONE) fonts are +used while \LUATEX\ adds support for \OPENTYPE. Other macro packages support that +by additional packages while \CONTEXT\ has it integrated. That is why the system +evolves over time. + +Just a users adapt to (yearly) operating system interfaces, mobile phones, all +kinds of hardware, cars, clothing, media and so on, the \CONTEXT\ users have no +problem adapting to an evolving \TEX\ ecosystem. I guess claims about changes +(being a disadvantage) can only point to a lack of development elsewhere. The +main reason for mentioning this is that when \CONTEXT\ users move on to newer +engines, the older ones are seldom used. So, few users compare a \LMTX\ run with +one using \PDFTEX\ or \LUATEX. They naturally expect \LUAMETATEX\ to perform well +and maybe even to perform better over time. They just don't complain. And unless +one hacks (overloads) system macros compatibility is not really an issue. What +can be an issue is that updates and adaptations to a newer engine come with bugs +but those are solved. + +So, the fact that we compare incompatible engines with likely different low level +macro implementations of otherwise stable features of a macro package makes +comparison hard. For instance, maybe there are speedups possible in frozen \MKII, +although it is unlikely, which makes that it might even perform better than +reported. In a similar fashion, the fact that \OPENTYPE\ is more demanding for +sure makes that \LUATEX\ rendering is slower than \PDFTEX. It anyhow makes a +discussion about performance within and between macro packages even more +ridiculous. Just don't buy those claims and|/|or ask on the \CONTEXT\ mailing +list for clarification. + +\stopsection + +\startsection[title=The job] + +So, say that we now have an efficient and powerful engine and a matching macro +package. Does that make all jobs faster? For sure, the ones that I use as +benchmark run much smoother. The 360 page \LUAMETATEX\ manual runs in less than +8.4 seconds on a Dell Precision laptop with (mobile) Intel(R) Xeon(R) CPU +E3-1505M v6 @ 3.00GHz, 2TB fast Samsung pro SSD, and 48 GB of memory, running +Windows 10. The \METAFUN\ manual with many more pages and thousands of \METAPOST\ +graphics needs a bit more than 12 seconds. So you don't hear me complain. This +chapter takes 7.5 seconds plus 0.5 is for the runner, not enough time to get +coffee. + +Nowadays I tend to measure performance in terms of pages per second, because in +the end that is what users experience. For me more important are the gains for my +colleague who processes documents of 400 pages from hundreds of small \XML\ files +with multiple graphics per page. Given different output variants a lot of +processing takes place, so there a gain from 20 pages per second to 25 pages per +second is welcome. Anyway, here are a few measurements of a {\em simple} test suite +per January 7, 2023. We use this as test text: + +\starttyping +\def\Knuth{%% +Thus, I came to the conclusion that the designer of a new system +must not only be the implementer and first large||scale user; the +designer should also write the first user manual. +\par +The separation of any of these four components would have hurt +\TeX\ significantly. If I had not participated fully in all these +activities, literally hundreds of improvements would never have +been made, because I would never have thought of them or perceived +why they were important. +\par +But a system cannot be successful if it is too strongly influenced +by a single person. Once the initial design is complete and fairly +robust, the real test begins as people with many different +viewpoints undertake their own experiments. +} +\stoptyping + +Now keep in mind that these are simple examples. On more complex documents the +\LUAMETATEX\ engine with \LMTX\ is relatively faster: think \XML, plenty +\METAPOST, complex tables, advanced math, dozens of fonts in combination with the +new compact font mode. + +The tests themselves are simple: we switch fonts (because fonts bring overhead), +we add some color (because we use different methods), we process some graphics +(to show what embedding \METAPOST\ brings), we do some tables (because that can +be stressful). Each sample is run 50, 500 or 1000 times, and each set is run a +couple of times so that we compensate for caching and fluctuating system load. +The tests are more about signaling a trend than about absolute numbers. For +what it's worth, I used a \LUA\ script to run the samples. + +When you run an experiment that measures performance, keep in mind that +performance not only depends on the engine, but also on for instance logging. +When I run the \CONTEXT\ test suite it takes 1250 seconds if the console takes +the full screen on a 2560 by 1600 display and 30 seconds more on a 3840 by 2160 +display and it even depends on how large the font is set. On the 1920 by 1200 +monitor I get to 1230. Of course these times change when we add more to the test +suite so it's always a momentary measurement. + +Similar differences can be observed when running in an editor. A good test is +making a \CONTEXT\ format: 2.2 seconds goes down to below 1.8 when the output is +piped to a file. On a decent 2023 desktop those times are probably half but I +don't have one at hand. + +\startsubsubject[title={sample 1, number of runs: 2}] + +\starttyping +\starttext + \dorecurse {%s} { + \Knuth + \par + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.63 \NC 0.83 \NC 1.07 \NC \NR +\BC luatex \NC 0.95 \NC 1.86 \NC 2.94 \NC \NR +\BC luametatex \NC 0.61 \NC 1.49 \NC 2.48 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 2, number of runs: 2}] + +\starttyping +\starttext + \dorecurse {%s} { + \tf \Knuth \bf \Knuth + \it \Knuth \bs \Knuth + \par + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.70 \NC 1.73 \NC 2.80 \NC \NR +\BC luatex \NC 1.37 \NC 5.37 \NC 9.92 \NC \NR +\BC luametatex \NC 1.04 \NC 5.06 \NC 9.73 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 3, number of runs: 2}] + +\starttyping +\starttext + \dorecurse {%s} { + \tf \Knuth \it knuth \bf \Knuth \bs knuth + \it \Knuth \tf knuth \bs \Knuth \bf knuth + \par + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.71 \NC 1.81 \NC 2.98 \NC \NR +\BC luatex \NC 1.41 \NC 5.84 \NC 10.77 \NC \NR +\BC luametatex \NC 1.05 \NC 5.71 \NC 10.60 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 4, number of runs: 2}] + +\starttyping +\setupcolors[state=start] +\starttext + \dorecurse {%s} { + {\red \tf \Knuth \green \it knuth} + {\red \bf \Knuth \green \bs knuth} + {\red \it \Knuth \green \tf knuth} + {\red \bs \Knuth \green \bf knuth} + \par + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.73 \NC 1.91 \NC 3.64 \NC \NR +\BC luatex \NC 1.39 \NC 5.82 \NC 12.58 \NC \NR +\BC luametatex \NC 1.07 \NC 5.57 \NC 11.85 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 5, number of runs: 2}] + +\starttyping +\starttext + \dorecurse {%s} { + \null \page + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.62 \NC 1.12 \NC 1.68 \NC \NR +\BC luatex \NC 0.90 \NC 1.39 \NC 1.98 \NC \NR +\BC luametatex \NC 0.58 \NC 0.99 \NC 1.46 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 6, number of runs: 2}] + +\starttyping +\starttext + \dorecurse {%s} { + %% nothing + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.55 \NC 0.54 \NC 0.56 \NC \NR +\BC luatex \NC 0.79 \NC 0.81 \NC 0.82 \NC \NR +\BC luametatex \NC 0.54 \NC 0.52 \NC 0.53 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 7, number of runs: 2}] + +\starttyping +\starttext + \dontleavehmode + \dorecurse {%s} { + \framed[width=1cm,height=1cm,offset=2mm]{x} + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.58 \NC 0.65 \NC 0.71 \NC \NR +\BC luatex \NC 0.84 \NC 0.96 \NC 1.08 \NC \NR +\BC luametatex \NC 0.54 \NC 0.62 \NC 0.72 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 8, number of runs: 2}] + +\starttyping +\starttext + \dontleavehmode + \dorecurse {%s} { + \framed + [width=1cm,height=1cm,offset=2mm, + foregroundstyle=bold,foregroundcolor=red, + background=color,backgroundcolor=green] + {x} + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.59 \NC 0.70 \NC 0.83 \NC \NR +\BC luatex \NC 0.87 \NC 1.00 \NC 1.17 \NC \NR +\BC luametatex \NC 0.55 \NC 0.66 \NC 0.78 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 9, number of runs: 2}] + +\starttyping +\starttext + \ifdefined\permanent\else\def\BC{\NC\bf}\fi + \dontleavehmode + \dorecurse {%s} { + \starttabulate[|||||] + \NC test \BC test \NC test \NC test \NC \NR + \NC test \BC test \NC test \NC test \NC \NR + \NC test \BC test \NC test \NC test \NC \NR + \NC test \BC test \NC test \NC test \NC \NR + \stoptabulate + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 0.62 \NC 1.15 \NC 1.71 \NC \NR +\BC luatex \NC 0.94 \NC 1.84 \NC 2.86 \NC \NR +\BC luametatex \NC 0.60 \NC 1.19 \NC 1.88 \NC \NR +\HL +\stoptabulate + +\stopsubsubject + +\startsubsubject[title={sample 10, number of runs: 2}] + +\starttyping +\starttext + \dontleavehmode + \dorecurse {%s} { + \startMPcode + fill fullcircle scaled 1cm withcolor red ; + fill fullsquare scaled 1cm withcolor green ; + \stopMPcode + \space + } +\stoptext +\stoptyping + +\starttabulate[||r|r|r|] +\HL +\BC engine \BC 50 \BC 500 \BC 1000 \NC \NR +\HL +\BC pdftex \NC 5.73 \NC 50.98 \NC 102.10 \NC \NR +\BC luatex \NC 0.93 \NC 1.07 \NC 1.30 \NC \NR +\BC luametatex \NC 0.57 \NC 0.71 \NC 0.86 \NC \NR +\HL +\stoptabulate + +\stopsection + +\startsection[title=Final words] + +Whenever I run into (or get send) remarks of (especially non \CONTEXT) users +suggesting that \LUATEX\ is much slower than \PDFTEX\ or that \LUAMETATEX\ seems +much faster than \LUATEX, one really has to keep in mind that this is not always +true. Among the questions to be asked are \quotation {What engine do you use?}, +\quotation {Which macro package do you use?}, \quotation {How well is your style +set up?}, \quotation {How complex is the document?}, \quotation {Is your own +additional code efficient?}, \quotation {Do you use engine and macro package +features the right way?} and of course \quotation {What do you compare with?}, +\quotation {What do you expect and why?}, \quotation {Do you actually know what +goes on deep down?}. An embarrassing one can be \quotation {Do you have an idea +what is involved in fulfilling your request given that we use a flexible adaptive +macro language?}. Much probably these questions not get answered properly. + +Another thing to make clear is that when someone claims for instance that +\CONTEXT\ \LMTX\ is fast because of \LUAMETATEX, or that \LUAMETATEX\ is much +faster than \LUATEX, a healthy suspicion should kick in: does that someone really +knows what happens and matters? The previous numbers do show differences for +simple cases but we're often not talking of differences that can be used as an +excuse for insufficient coding. In the end it is all about the experience: does +performance feel in tune with expectations. Which is not to say that I will make +\CONTEXT\ and \LUAMETATEX\ faster because after all there are usage scenarios +where one has to process tens of thousands of documents with a reasonable amount +of time, on regular infrastructure, and of course with as little as possible +energy consumption. + +If \PDFTEX\ suits your purpose, there is no need to move to \LUATEX. As with +rechargeable batteries in cordless phones a higher capacity can make things +worse. If \LUATEX\ fits the bill, don't dream about using \LUAMETATEX\ instead +because it will half runtime because the adaptations needed in the macro package +(like adding a backend) might actually slow it down. Moores law doesn't apply to +\TEX\ engines and macro packages and you might get disappointed. Accept that the +choice you made for a macro package can come with a price. + +Quite often it is rather easy to debunk complaints and claims which makes one +wonder why claims about perceived or potential are made at all. But then, I'm +accustomed to weird remarks and conclusions about \CONTEXT\ as a macro package, +or for that matter \LUATEX\ (as it originates in the \CONTEXT\ community) even by +people who should know better. Hopefully the above invites to being more careful. + +\stopsection + +\stopchapter + +\stopcomponent diff --git a/doc/context/sources/general/manuals/musings/musings.tex b/doc/context/sources/general/manuals/musings/musings.tex index 143dfe456..3e3b35ea0 100644 --- a/doc/context/sources/general/manuals/musings/musings.tex +++ b/doc/context/sources/general/manuals/musings/musings.tex @@ -27,6 +27,7 @@ % \component musings-treasures % \component musings-whytex-again \component musings-dontusetex + % \component musings-speed \stopbodymatter \stopproduct -- cgit v1.2.3